Canon Wux450, Wx520 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 161
![Page 161
Installation-Related Menu Settings
161
Installation and Maintenance
Installation
2Select [B-width], and use the remote’s [ ] [ ] buttons to specify the width
of area B.This will make the width of area D narrower.
3Adjust the width of area B to roughly match the area where the black level
is noticeable, and then use the following edge-blending settings to adjust
the black level of area B.
Adjust the black level of area B the same way as you adjusted it for area D.
For adjustment instructions, see “A...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-160.png "Page 161
Installation-Related Menu Settings
161
Installation and Maintenance
Installation
2Select [B-width], and use the remote’s [ ] [ ] buttons to specify the width
of area B.This will make the width of area D narrower.
3Adjust the width of area B to roughly match the area where the black level
is noticeable, and then use the following edge-blending settings to adjust
the black level of area B.
Adjust the black level of area B the same way as you adjusted it for area D.
For adjustment instructions, see “A...")
Installation-Related Menu Settings 161 Installation and Maintenance Installation 2Select [B-width], and use the remote’s [ ] [ ] buttons to specify the width of area B.This will make the width of area D narrower. 3Adjust the width of area B to roughly match the area where the black level is noticeable, and then use the following edge-blending settings to adjust the black level of area B. Adjust the black level of area B the same way as you adjusted it for area D. For adjustment instructions, see “A...
Page 162
162
Page 163
163 Table of Contents Safety Instructions Before Use Operation Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation and Maintenance Installation Connecting to a Network Maintenance Networked Multi-Projection Networked Multi-Projection Overview Operation in Each Mode Functions in All Modes AppendixOther Information Index Connecting to a Network
Page 164
164 Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Settings related to the network connection can be made from either the projector side ( P165) or computer side ( P174). Depending on the method of network connection, preparation on the computer side may be necessary. The following is an explanation of preparation on the computer side. Connection Methods Connect the...
Page 165
![Page 165
165
Installation and Maintenance
Connecting to a Network
Completing Projector Settings
From the projector menus screen,
network settings can be configured in
the [Network Setting] tab. For
instructions on menu operations, refer
to “Using Menus” (P82).Locking/Unlocking
Network Settings
> [Network Settings] >
[Network settings lock]
You can lock/unlock the network
settings so that they cannot be
changed.
Press the OK button to accept your
setting, and then press the MENU
button or EXIT button...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-164.png "Page 165
165
Installation and Maintenance
Connecting to a Network
Completing Projector Settings
From the projector menus screen,
network settings can be configured in
the [Network Setting] tab. For
instructions on menu operations, refer
to “Using Menus” (P82).Locking/Unlocking
Network Settings
> [Network Settings] >
[Network settings lock]
You can lock/unlock the network
settings so that they cannot be
changed.
Press the OK button to accept your
setting, and then press the MENU
button or EXIT button...")
165 Installation and Maintenance Connecting to a Network Completing Projector Settings From the projector menus screen, network settings can be configured in the [Network Setting] tab. For instructions on menu operations, refer to “Using Menus” (P82).Locking/Unlocking Network Settings > [Network Settings] > [Network settings lock] You can lock/unlock the network settings so that they cannot be changed. Press the OK button to accept your setting, and then press the MENU button or EXIT button...
Page 166
![Page 166
Completing Projector Settings
166
Enabling/Disabling
the Network Password
> [Network settings] > [Network
password setting]
You can set whether or not a
password is required in order to
change the projector network
settings.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Forcibly canceling the
network lock
On the Network password input
screen, press the buttons in the
following order to unlock the
settings: [ ] [OK]...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-165.png "Page 166
Completing Projector Settings
166
Enabling/Disabling
the Network Password
> [Network settings] > [Network
password setting]
You can set whether or not a
password is required in order to
change the projector network
settings.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Forcibly canceling the
network lock
On the Network password input
screen, press the buttons in the
following order to unlock the
settings: [ ] [OK]...")
Completing Projector Settings 166 Enabling/Disabling the Network Password > [Network settings] > [Network password setting] You can set whether or not a password is required in order to change the projector network settings. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [On]. Forcibly canceling the network lock On the Network password input screen, press the buttons in the following order to unlock the settings: [ ] [OK]...
Page 167
![Page 167
Completing Projector Settings
167
Installation and Maintenance
Connecting to a Network
Registering a Network
Password
> [Network settings] > [Register
network password]
Register the projector network
password.
When [Register network password] is
selected, the window shown below
appears.
Enter a 4-digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons on the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• If you...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-166.png "Page 167
Completing Projector Settings
167
Installation and Maintenance
Connecting to a Network
Registering a Network
Password
> [Network settings] > [Register
network password]
Register the projector network
password.
When [Register network password] is
selected, the window shown below
appears.
Enter a 4-digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons on the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• If you...")
Completing Projector Settings 167 Installation and Maintenance Connecting to a Network Registering a Network Password > [Network settings] > [Register network password] Register the projector network password. When [Register network password] is selected, the window shown below appears. Enter a 4-digit password. Enter the password using the [ ] / [ ] / [ ] / [ ] buttons on the remote control. Press the OK button to accept your setting and then press the MENU button or EXIT button. • If you...
Page 168
![Page 168
Completing Projector Settings
168
Specifying Standby
Power Consumption
> [Network settings] > [Network
standby settings]
Specify network function operating
status in standby mode as follows.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Low-power] is the factory default.
• [Low-power] may delay access over the
network for some functions. For faster
access, select [Normal].
• Power consumption when [Network function (wired)] is [On] varies...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-167.png "Page 168
Completing Projector Settings
168
Specifying Standby
Power Consumption
> [Network settings] > [Network
standby settings]
Specify network function operating
status in standby mode as follows.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Low-power] is the factory default.
• [Low-power] may delay access over the
network for some functions. For faster
access, select [Normal].
• Power consumption when [Network function (wired)] is [On] varies...")
Completing Projector Settings 168 Specifying Standby Power Consumption > [Network settings] > [Network standby settings] Specify network function operating status in standby mode as follows. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Low-power] is the factory default. • [Low-power] may delay access over the network for some functions. For faster access, select [Normal]. • Power consumption when [Network function (wired)] is [On] varies...
Page 169
![Page 169
Completing Projector Settings
169
Installation and Maintenance
Connecting to a Network
Viewing the Gateway
Address
> [Network settings] > [Detailed settings (wired)] >
[Gateway address]
View the projector’s gateway
address as follows.
Note that the information can only be
displayed, not changed.
Viewing the MAC
Address
> [Network settings] > [Detailed settings (wired)] >
[MAC address]
View the projecto’s MAC address as
follows.
Note that the information can only be
displayed, not changed.](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-168.png "Page 169
Completing Projector Settings
169
Installation and Maintenance
Connecting to a Network
Viewing the Gateway
Address
> [Network settings] > [Detailed settings (wired)] >
[Gateway address]
View the projector’s gateway
address as follows.
Note that the information can only be
displayed, not changed.
Viewing the MAC
Address
> [Network settings] > [Detailed settings (wired)] >
[MAC address]
View the projecto’s MAC address as
follows.
Note that the information can only be
displayed, not changed.")
Completing Projector Settings 169 Installation and Maintenance Connecting to a Network Viewing the Gateway Address > [Network settings] > [Detailed settings (wired)] > [Gateway address] View the projector’s gateway address as follows. Note that the information can only be displayed, not changed. Viewing the MAC Address > [Network settings] > [Detailed settings (wired)] > [MAC address] View the projecto’s MAC address as follows. Note that the information can only be displayed, not changed.
Page 170
![Page 170
Completing Projector Settings
170
Enabling/Disabling
DHCP
> [Network settings] > [Detailed settings (wired)] >
[DHCP]
You can turn the projector DHCP
function on or off.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying TCP/IP
Settings
> [Network settings] > [Detailed settings
(wired) ] >
[TCP/IP setting]
Configure the projector TCP/IP
settings.
When [TCP/IP setting] is selected, the
window shown below...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-169.png "Page 170
Completing Projector Settings
170
Enabling/Disabling
DHCP
> [Network settings] > [Detailed settings (wired)] >
[DHCP]
You can turn the projector DHCP
function on or off.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying TCP/IP
Settings
> [Network settings] > [Detailed settings
(wired) ] >
[TCP/IP setting]
Configure the projector TCP/IP
settings.
When [TCP/IP setting] is selected, the
window shown below...")
Completing Projector Settings 170 Enabling/Disabling DHCP > [Network settings] > [Detailed settings (wired)] > [DHCP] You can turn the projector DHCP function on or off. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default. Specifying TCP/IP Settings > [Network settings] > [Detailed settings (wired) ] > [TCP/IP setting] Configure the projector TCP/IP settings. When [TCP/IP setting] is selected, the window shown below...