Canon Wux450, Wx520 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
101
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Reducing Image
Noise
(Noise reduction)
> [Image adjustment] > [Advanced adjustment] >
[Noise reduction]
You can reduce image noise.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default for HDMI (when [HDMI
In] ( P113 ) is set to [Auto]) is [Off] and when
Component is used, it is set to [Weak].
• Image resolution may seem lower when noise reduction is...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-100.png "Page 101
101
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Reducing Image
Noise
(Noise reduction)
> [Image adjustment] > [Advanced adjustment] >
[Noise reduction]
You can reduce image noise.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default for HDMI (when [HDMI
In] ( P113 ) is set to [Auto]) is [Off] and when
Component is used, it is set to [Weak].
• Image resolution may seem lower when noise reduction is...")
101 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Reducing Image Noise (Noise reduction) > [Image adjustment] > [Advanced adjustment] > [Noise reduction] You can reduce image noise. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default for HDMI (when [HDMI In] ( P113 ) is set to [Auto]) is [Off] and when Component is used, it is set to [Weak]. • Image resolution may seem lower when noise reduction is...
Page 102
![Page 102
102
Adjusting Image Quality (Image Adjustment)
Correcting Memory
Color
> [Image adjustment] > [Advanced adjustment] >
[Mem. color correct]
Enhances skin tones, blue skies, and
greens, so that these colors are
more consistent with people’s
remembered impressions.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default settings are as follows.
- For HDMI (when [HDMI In] ( P113) is set
to [Computer]), Digital PC, Analog PC,
USB, or LAN,...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-101.png "Page 102
102
Adjusting Image Quality (Image Adjustment)
Correcting Memory
Color
> [Image adjustment] > [Advanced adjustment] >
[Mem. color correct]
Enhances skin tones, blue skies, and
greens, so that these colors are
more consistent with people’s
remembered impressions.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default settings are as follows.
- For HDMI (when [HDMI In] ( P113) is set
to [Computer]), Digital PC, Analog PC,
USB, or LAN,...")
102 Adjusting Image Quality (Image Adjustment) Correcting Memory Color > [Image adjustment] > [Advanced adjustment] > [Mem. color correct] Enhances skin tones, blue skies, and greens, so that these colors are more consistent with people’s remembered impressions. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default settings are as follows. - For HDMI (when [HDMI In] ( P113) is set to [Computer]), Digital PC, Analog PC, USB, or LAN,...
Page 103
![Page 103
103
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
• [Off] is the factory default.
• The adjustments you have made are stored as adjusted values for the input signals and
image mode of the current projection.
• Adjustment is not shown on the projected menu screen itself.Fine-Tuning Gamma
> [Image adjustment] > [Advanced adjustment] >
[Fine-Tune Gamma]
The four gamma curves (white, red,
green, blue) can be adjusted. When
the white curve is adjusted, the
adjustment...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-102.png "Page 103
103
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
• [Off] is the factory default.
• The adjustments you have made are stored as adjusted values for the input signals and
image mode of the current projection.
• Adjustment is not shown on the projected menu screen itself.Fine-Tuning Gamma
> [Image adjustment] > [Advanced adjustment] >
[Fine-Tune Gamma]
The four gamma curves (white, red,
green, blue) can be adjusted. When
the white curve is adjusted, the
adjustment...")
103 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus • [Off] is the factory default. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. • Adjustment is not shown on the projected menu screen itself.Fine-Tuning Gamma > [Image adjustment] > [Advanced adjustment] > [Fine-Tune Gamma] The four gamma curves (white, red, green, blue) can be adjusted. When the white curve is adjusted, the adjustment...
Page 104
104 Adjusting Image Quality (Image Adjustment) • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. • For details of gamma correction, refer to page 98 . • RGB offset (relative to 0) can be adjusted by using the R/G/B Offset function (“Adjusting Colors” ( P99)). • Adjustment is not applied to the projected menu itself. Perform adjustment using input signals or a built-in test pattern.Controlling Contrast (Iris) > [Image...
Page 105
![Page 105
105
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Specifying the Lamp
Mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-104.png "Page 105
105
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Specifying the Lamp
Mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values...")
105 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Specifying the Lamp Mode > [Image adjustment] > [Lamp mode] Reducing the lamp brightness reduces power consumption and cooling fan noise. You can access the [Lamp mode] menu by pressing the ECO button on the remote control. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [Full power]. • The adjustment you have made is stored as adjusted values...
Page 106
![Page 106
106
Customizing System Operation (System Settings)
Registering User Logos
> [System settings] > [User screen
settings] >
[Logo capture]
Registers the current image as a
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Positioning User
Logos
> [System settings] > [User screen
settings] >
[Logo position]
Specify the...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-105.png "Page 106
106
Customizing System Operation (System Settings)
Registering User Logos
> [System settings] > [User screen
settings] >
[Logo capture]
Registers the current image as a
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Positioning User
Logos
> [System settings] > [User screen
settings] >
[Logo position]
Specify the...")
106 Customizing System Operation (System Settings) Registering User Logos > [System settings] > [User screen settings] > [Logo capture] Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the startup image. Press the OK button to accept your setting and then press the MENU button or EXIT button. Positioning User Logos > [System settings] > [User screen settings] > [Logo position] Specify the...
Page 107
![Page 107
107
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
No Signal Screen
> [System settings] > [User screen settings] >
[No signal screen]
As the image projected when there is
no input signal, you can choose a
black, blue, or registered user
screen.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Blue] is the factory default.
Screen When Blank
> [System settings] > [User screen
settings] >
[Screen when blank]
You...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-106.png "Page 107
107
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
No Signal Screen
> [System settings] > [User screen settings] >
[No signal screen]
As the image projected when there is
no input signal, you can choose a
black, blue, or registered user
screen.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Blue] is the factory default.
Screen When Blank
> [System settings] > [User screen
settings] >
[Screen when blank]
You...")
107 Customizing System Operation (System Settings) Operation Setting Functions from Menus No Signal Screen > [System settings] > [User screen settings] > [No signal screen] As the image projected when there is no input signal, you can choose a black, blue, or registered user screen. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Blue] is the factory default. Screen When Blank > [System settings] > [User screen settings] > [Screen when blank] You...
Page 108
![Page 108
108
Customizing System Operation (System Settings)
Selecting a Logo at
Startup
> [System settings] > [User screen
settings] >
[Projector on]
You can display a specified logo on
the screen from the moment the
projector is turned on to the moment
it is ready for projection.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Canon logo] is the factory default.
• Only images with an aspect of 16:10 can be
registered as user logos.
Specifying Auto...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-107.png "Page 108
108
Customizing System Operation (System Settings)
Selecting a Logo at
Startup
> [System settings] > [User screen
settings] >
[Projector on]
You can display a specified logo on
the screen from the moment the
projector is turned on to the moment
it is ready for projection.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Canon logo] is the factory default.
• Only images with an aspect of 16:10 can be
registered as user logos.
Specifying Auto...")
108 Customizing System Operation (System Settings) Selecting a Logo at Startup > [System settings] > [User screen settings] > [Projector on] You can display a specified logo on the screen from the moment the projector is turned on to the moment it is ready for projection. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Canon logo] is the factory default. • Only images with an aspect of 16:10 can be registered as user logos. Specifying Auto...
Page 109
![Page 109
109
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying Direct
Power-On
> [System settings] > [Direct power
on]
You can turn on the projector by
connecting the power cable without
pressing the POWER button.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying Silence or
Operating Tones
> [System settings] > [Beep]
You can select whether a beep
sounds or not when you...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-108.png "Page 109
109
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying Direct
Power-On
> [System settings] > [Direct power
on]
You can turn on the projector by
connecting the power cable without
pressing the POWER button.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying Silence or
Operating Tones
> [System settings] > [Beep]
You can select whether a beep
sounds or not when you...")
109 Customizing System Operation (System Settings) Operation Setting Functions from Menus Specifying Direct Power-On > [System settings] > [Direct power on] You can turn on the projector by connecting the power cable without pressing the POWER button. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default. Specifying Silence or Operating Tones > [System settings] > [Beep] You can select whether a beep sounds or not when you...
Page 110
![Page 110
110
Customizing System Operation (System Settings)
Specifying Key Repeat
Operation
> [System settings] > [Key repeat]
By pressing and holding the button
on the projector or the remote
control you can operate Key repeat
in the same way as when the button
is pressed repeatedly.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Locking Projector or
Remote Buttons
> [System settings] > [Key lock]
You can lock the projector to...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-109.png "Page 110
110
Customizing System Operation (System Settings)
Specifying Key Repeat
Operation
> [System settings] > [Key repeat]
By pressing and holding the button
on the projector or the remote
control you can operate Key repeat
in the same way as when the button
is pressed repeatedly.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Locking Projector or
Remote Buttons
> [System settings] > [Key lock]
You can lock the projector to...")
110 Customizing System Operation (System Settings) Specifying Key Repeat Operation > [System settings] > [Key repeat] By pressing and holding the button on the projector or the remote control you can operate Key repeat in the same way as when the button is pressed repeatedly. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [On]. Locking Projector or Remote Buttons > [System settings] > [Key lock] You can lock the projector to...