Canon Wux450, Wx520 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Operation
Projecting an Image
Step 2 Select an Input Signal
Select the input signal in the [Input] menu when you want to project a digital PC or
AV equipment signal, or to switch between inputs when multiple computers or
multiple sets of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
Types of Input Signals
The table below shows the relationship among input signals supported by the
projector, input terminals and connection cables....](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-50.png "Page 51
51
Operation
Projecting an Image
Step 2 Select an Input Signal
Select the input signal in the [Input] menu when you want to project a digital PC or
AV equipment signal, or to switch between inputs when multiple computers or
multiple sets of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
Types of Input Signals
The table below shows the relationship among input signals supported by the
projector, input terminals and connection cables....")
51 Operation Projecting an Image Step 2 Select an Input Signal Select the input signal in the [Input] menu when you want to project a digital PC or AV equipment signal, or to switch between inputs when multiple computers or multiple sets of AV equipment are connected. Skip this step if you have not changed the input signal since the last projection. Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables....
Page 52
![Page 52
Step 2 Select an Input Signal
52
Selecting an Input Signal
1Press the INPUT button to display the window shown below.The currently active input signal is mark ed with a green circle and enclosed by
a orange border.
An input signal that is ready for projection is displayed in white. When no signal
is received, it is displayed in gray. However, [Digital PC] or [Analog PC-1] may
be displayed in gray even if these signals are ready for projection.
2You can switch the available input signal types by...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-51.png "Page 52
Step 2 Select an Input Signal
52
Selecting an Input Signal
1Press the INPUT button to display the window shown below.The currently active input signal is mark ed with a green circle and enclosed by
a orange border.
An input signal that is ready for projection is displayed in white. When no signal
is received, it is displayed in gray. However, [Digital PC] or [Analog PC-1] may
be displayed in gray even if these signals are ready for projection.
2You can switch the available input signal types by...")
Step 2 Select an Input Signal 52 Selecting an Input Signal 1Press the INPUT button to display the window shown below.The currently active input signal is mark ed with a green circle and enclosed by a orange border. An input signal that is ready for projection is displayed in white. When no signal is received, it is displayed in gray. However, [Digital PC] or [Analog PC-1] may be displayed in gray even if these signals are ready for projection. 2You can switch the available input signal types by...
Page 53
![Page 53
53
Operation
Projecting an Image
Step 3 Adjust the Image
Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the
computer to the resolution closest to the output signal resolution of the projector.
(P288 )
Maximum resolution
WUX450 : 1920 X 1200 dots
WX520 : 1440 X 900 dots
■Windows 8
1Move the cursor toward the upper or lower right corner to access the
menu.
2Click [Settings], and then click [Control Panel].
3From [Control...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-52.png "Page 53
53
Operation
Projecting an Image
Step 3 Adjust the Image
Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the
computer to the resolution closest to the output signal resolution of the projector.
(P288 )
Maximum resolution
WUX450 : 1920 X 1200 dots
WX520 : 1440 X 900 dots
■Windows 8
1Move the cursor toward the upper or lower right corner to access the
menu.
2Click [Settings], and then click [Control Panel].
3From [Control...")
53 Operation Projecting an Image Step 3 Adjust the Image Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the display resolution of the computer to the resolution closest to the output signal resolution of the projector. (P288 ) Maximum resolution WUX450 : 1920 X 1200 dots WX520 : 1440 X 900 dots ■Windows 8 1Move the cursor toward the upper or lower right corner to access the menu. 2Click [Settings], and then click [Control Panel]. 3From [Control...
Page 54
![Page 54
Step 3 Adjust the Image
54
■Mac OS X
1Open the Apple Menu and select
[System Preferences].
2In the [System Preferences] window,
click the [Displays] icon to display the
Display window.
3Select the [Display] tab and select the
resolution closest to the maximum
output signal resolution of the projector
from the [Resolutions] list.
4Close the [System Preferences] window.
■Windows Vista
1Open the [Control Panel] from
the start menu, then select
[Appearance and
Personalization] - [Adjust screen...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-53.png "Page 54
Step 3 Adjust the Image
54
■Mac OS X
1Open the Apple Menu and select
[System Preferences].
2In the [System Preferences] window,
click the [Displays] icon to display the
Display window.
3Select the [Display] tab and select the
resolution closest to the maximum
output signal resolution of the projector
from the [Resolutions] list.
4Close the [System Preferences] window.
■Windows Vista
1Open the [Control Panel] from
the start menu, then select
[Appearance and
Personalization] - [Adjust screen...")
Step 3 Adjust the Image 54 ■Mac OS X 1Open the Apple Menu and select [System Preferences]. 2In the [System Preferences] window, click the [Displays] icon to display the Display window. 3Select the [Display] tab and select the resolution closest to the maximum output signal resolution of the projector from the [Resolutions] list. 4Close the [System Preferences] window. ■Windows Vista 1Open the [Control Panel] from the start menu, then select [Appearance and Personalization] - [Adjust screen...
Page 55
![Page 55
55
Step 3 Adjust the Image
Operation
Projecting an Image
Auto PC Adjustment
If the image display is shifted or there is flickering of the screen when [Analog PC-1]
or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to
the optimal condition.
The adjustment results will be stored. If the projector is used again with the same
computer, when the input signal is selected the image will be projected
automatically under the same conditions that were previously adjusted.
■...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-54.png "Page 55
55
Step 3 Adjust the Image
Operation
Projecting an Image
Auto PC Adjustment
If the image display is shifted or there is flickering of the screen when [Analog PC-1]
or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to
the optimal condition.
The adjustment results will be stored. If the projector is used again with the same
computer, when the input signal is selected the image will be projected
automatically under the same conditions that were previously adjusted.
■...")
55 Step 3 Adjust the Image Operation Projecting an Image Auto PC Adjustment If the image display is shifted or there is flickering of the screen when [Analog PC-1] or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to the optimal condition. The adjustment results will be stored. If the projector is used again with the same computer, when the input signal is selected the image will be projected automatically under the same conditions that were previously adjusted. ■...
Page 56
![Page 56
Step 3 Adjust the Image
56
Adjusting the Image Position
Turn the lens shift dials to adjust the projected image vertically or horizontally.
Called “lens shift,” this adjusts the projected image into position by moving the lens
up, down, left, or right.
Adjusting the Focus
To adjust the focus, turn the focus ring.
• Instead of adjusting where the image is projected, you can also move the\
image itself. For details, refer to “Specifying Digital Image Shift” ( P146).
• You can fine-tune the image...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-55.png "Page 56
Step 3 Adjust the Image
56
Adjusting the Image Position
Turn the lens shift dials to adjust the projected image vertically or horizontally.
Called “lens shift,” this adjusts the projected image into position by moving the lens
up, down, left, or right.
Adjusting the Focus
To adjust the focus, turn the focus ring.
• Instead of adjusting where the image is projected, you can also move the\
image itself. For details, refer to “Specifying Digital Image Shift” ( P146).
• You can fine-tune the image...")
Step 3 Adjust the Image 56 Adjusting the Image Position Turn the lens shift dials to adjust the projected image vertically or horizontally. Called “lens shift,” this adjusts the projected image into position by moving the lens up, down, left, or right. Adjusting the Focus To adjust the focus, turn the focus ring. • Instead of adjusting where the image is projected, you can also move the\ image itself. For details, refer to “Specifying Digital Image Shift” ( P146). • You can fine-tune the image...
Page 57
57 Operation Projecting an Image Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. You may need to change the setting depending on the resolution of the computer or other AV equipment connected. If the image is not projected with the desired...
Page 58
![Page 58
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
58
3Select [Screen aspect] with the [ ] / [ ] buttons, and then press the OK
button.
4Use the [ ] / [ ] buttons to select the desired contents.
16:10
Select this when you use a screen with an aspect
ratio of 16:10. Also select this screen aspect when
projecting on a wall.
You can correct keystone distortion with this mode.
(P65 )
16:9
Select this when you use a screen with an aspect
ratio of 16:9.
You can correct keystone distortion...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-57.png "Page 58
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
58
3Select [Screen aspect] with the [ ] / [ ] buttons, and then press the OK
button.
4Use the [ ] / [ ] buttons to select the desired contents.
16:10
Select this when you use a screen with an aspect
ratio of 16:10. Also select this screen aspect when
projecting on a wall.
You can correct keystone distortion with this mode.
(P65 )
16:9
Select this when you use a screen with an aspect
ratio of 16:9.
You can correct keystone distortion...")
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen 58 3Select [Screen aspect] with the [ ] / [ ] buttons, and then press the OK button. 4Use the [ ] / [ ] buttons to select the desired contents. 16:10 Select this when you use a screen with an aspect ratio of 16:10. Also select this screen aspect when projecting on a wall. You can correct keystone distortion with this mode. (P65 ) 16:9 Select this when you use a screen with an aspect ratio of 16:9. You can correct keystone distortion...
Page 59
59 Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Operation Projecting an Image 16:9 D. image shift Select this when you use a screen with an aspect ratio of 16:9. Keystone correction cannot be performed in this mode. However, it is possible to move the image up / down when projecting level. For details about how to move the image, refer to page 60. 4:3 D. image shift Select this when you use a screen with an aspect ratio of 4:3. Keystone correction cannot be performed in this mode....
Page 60
![Page 60
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
60
Moving Image with 16:9 D. Image Shift
This option applies image processing to reposition the image. For this reason, it is
called digital image shift.
1When the screen aspect is [16:9 D. image shift], press the MENU button to
display the menu.
2Press the [ ] / [ ] buttons to select the [Install settings] tab.
3Use the [ ] / [ ] buttons to select [Digital image shift], then press the OK
button.
Projector
Remote controlProjector...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-59.png "Page 60
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
60
Moving Image with 16:9 D. Image Shift
This option applies image processing to reposition the image. For this reason, it is
called digital image shift.
1When the screen aspect is [16:9 D. image shift], press the MENU button to
display the menu.
2Press the [ ] / [ ] buttons to select the [Install settings] tab.
3Use the [ ] / [ ] buttons to select [Digital image shift], then press the OK
button.
Projector
Remote controlProjector...")
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen 60 Moving Image with 16:9 D. Image Shift This option applies image processing to reposition the image. For this reason, it is called digital image shift. 1When the screen aspect is [16:9 D. image shift], press the MENU button to display the menu. 2Press the [ ] / [ ] buttons to select the [Install settings] tab. 3Use the [ ] / [ ] buttons to select [Digital image shift], then press the OK button. Projector Remote controlProjector...