Canon Projector WUX6010 User Manual
Here you can view all the pages of manual Canon Projector WUX6010 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Projection Procedure
71
Basic Guide
Projection Procedure
■Selecting an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed
image modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. (P88)
•User settings 1 - 5 are displayed when the desired image settings have been
created and stored using the user memory function in the image adjustment
menu. (P88)...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-70.png "Page 71
Projection Procedure
71
Basic Guide
Projection Procedure
■Selecting an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed
image modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. (P88)
•User settings 1 - 5 are displayed when the desired image settings have been
created and stored using the user memory function in the image adjustment
menu. (P88)...")
Projection Procedure 71 Basic Guide Projection Procedure ■Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) You can also select any image mode from the [Image mode] menu. (P88) •User settings 1 - 5 are displayed when the desired image settings have been created and stored using the user memory function in the image adjustment menu. (P88)...
Page 72
72 Convenient Features This section describes features convenient during presentations and in other situations. Temporarily Blacking Out an Image Projection can be temporarily blanked after a presentation, or to divert the audience’s attention away from the screen. Press the BLANK button to black out the image. Press the BLANK button again to show the image. • You can set the screen state while blacking out the image in the menu. (P108) • The lamp remains illuminated while the image is blacked out....
Page 73
Convenient Features 73 Basic Guide Convenient Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see “Install settings” (P95) or “Displayed Test Patterns” (P179). Set Power-Saving Settings Set power-saving settings as needed. The following four settings are available. For details, refer to the page...
Page 74
![Page 74
74
Convenient Features
Adjusting the Volume
Useful when:
• You want to adjust the volume level of the projector or external speakers.
Press the VOL button. The following screen appears.
• You can also adjust the volume level with the [ ] / [ ] buttons of the
projector.
• Adjust the volume or mute setting on the computer if the volume level is too
low.
• You can also adjust the volume level of the speakers connected via the
audio output terminal.
Muting the Sound
Useful when:
• You want to temporarily...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-73.png "Page 74
74
Convenient Features
Adjusting the Volume
Useful when:
• You want to adjust the volume level of the projector or external speakers.
Press the VOL button. The following screen appears.
• You can also adjust the volume level with the [ ] / [ ] buttons of the
projector.
• Adjust the volume or mute setting on the computer if the volume level is too
low.
• You can also adjust the volume level of the speakers connected via the
audio output terminal.
Muting the Sound
Useful when:
• You want to temporarily...")
74 Convenient Features Adjusting the Volume Useful when: • You want to adjust the volume level of the projector or external speakers. Press the VOL button. The following screen appears. • You can also adjust the volume level with the [ ] / [ ] buttons of the projector. • Adjust the volume or mute setting on the computer if the volume level is too low. • You can also adjust the volume level of the speakers connected via the audio output terminal. Muting the Sound Useful when: • You want to temporarily...
Page 75
![Page 75
Convenient Features
75
Basic Guide
Convenient Features
Zooming Part of an Image
Useful when:
• Zooming in on an object such as a small graph during a presentation (up to 12x).
• Focusing on the current subject.
Press the +D.ZOOM button
to enlarge a part of the
image. Press the –D.ZOOM
button to reduce the image
size.
• The magnification appears on
the screen.
You can move the enlarged area by using the
[ ] / [ ] / [ ] / [ ] buttons.
You can restore the original size of the image by pressing the OK...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-74.png "Page 75
Convenient Features
75
Basic Guide
Convenient Features
Zooming Part of an Image
Useful when:
• Zooming in on an object such as a small graph during a presentation (up to 12x).
• Focusing on the current subject.
Press the +D.ZOOM button
to enlarge a part of the
image. Press the –D.ZOOM
button to reduce the image
size.
• The magnification appears on
the screen.
You can move the enlarged area by using the
[ ] / [ ] / [ ] / [ ] buttons.
You can restore the original size of the image by pressing the OK...")
Convenient Features 75 Basic Guide Convenient Features Zooming Part of an Image Useful when: • Zooming in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the +D.ZOOM button to enlarge a part of the image. Press the –D.ZOOM button to reduce the image size. • The magnification appears on the screen. You can move the enlarged area by using the [ ] / [ ] / [ ] / [ ] buttons. You can restore the original size of the image by pressing the OK...
Page 76
76
Page 77
77 Safety Instructions Before Use Basic Guide Installation Procedure Connection Procedure Projection Procedure Convenient Features Advanced GuideUsing Menus Menu Description Advanced Projection Other InformationMaintenance Product Specifications Troubleshooting Advanced Guide
Page 78
![Page 78
78
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
[System settings] tab (P107)
You can set the operation of the projector.
[Image adjustment] tab (P87)
You can adjust the image quality and colors
according to your preference.
[Network settings] tab (P122)
These settings are for when using the projector
from a PC via a network.
For the network settings, refer to “Network
settings” (P120).
[Information]...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-77.png "Page 78
78
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
[System settings] tab (P107)
You can set the operation of the projector.
[Image adjustment] tab (P87)
You can adjust the image quality and colors
according to your preference.
[Network settings] tab (P122)
These settings are for when using the projector
from a PC via a network.
For the network settings, refer to “Network
settings” (P120).
[Information]...")
78 Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. [System settings] tab (P107) You can set the operation of the projector. [Image adjustment] tab (P87) You can adjust the image quality and colors according to your preference. [Network settings] tab (P122) These settings are for when using the projector from a PC via a network. For the network settings, refer to “Network settings” (P120). [Information]...
Page 79
![Page 79
79
Using Menus
Advanced Guide
Using Menus
Basic Menu Operations
1Press the MENU button to display the menu window.
2Press the [ ] / [ ] buttons to select a tab.
•If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to
move the current selection to the top.
3Press the [ ] / [ ] buttons to select an item.
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect (P82)
Remote controlProjector
Remote controlProjector
Remote...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-78.png "Page 79
79
Using Menus
Advanced Guide
Using Menus
Basic Menu Operations
1Press the MENU button to display the menu window.
2Press the [ ] / [ ] buttons to select a tab.
•If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to
move the current selection to the top.
3Press the [ ] / [ ] buttons to select an item.
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect (P82)
Remote controlProjector
Remote controlProjector
Remote...")
79 Using Menus Advanced Guide Using Menus Basic Menu Operations 1Press the MENU button to display the menu window. 2Press the [ ] / [ ] buttons to select a tab. •If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to move the current selection to the top. 3Press the [ ] / [ ] buttons to select an item. 4Select contents. How to select the contents varies depending on the item. Selecting from a list Example: Aspect (P82) Remote controlProjector Remote controlProjector Remote...
Page 80
![Page 80
Using Menus
80
Adjusting with the [ ] / [ ] buttons Example: Contrast (P89)
Selecting from a different screen (1) Example: Menu position (P104)
Selecting from a different screen (2) Example: Tracking (P83)
5Pressing the MENU button causes the menu screen to disappear.
1. Select [Contrast].
2. Use the [ ] / [ ] buttons to adjust
the setting.
1. Select [Menu position].
2. Press the OK button to display a
different screen.
3. Then follow the instruction on the
screen.
1. Select [Input signal...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-79.png "Page 80
Using Menus
80
Adjusting with the [ ] / [ ] buttons Example: Contrast (P89)
Selecting from a different screen (1) Example: Menu position (P104)
Selecting from a different screen (2) Example: Tracking (P83)
5Pressing the MENU button causes the menu screen to disappear.
1. Select [Contrast].
2. Use the [ ] / [ ] buttons to adjust
the setting.
1. Select [Menu position].
2. Press the OK button to display a
different screen.
3. Then follow the instruction on the
screen.
1. Select [Input signal...")
Using Menus 80 Adjusting with the [ ] / [ ] buttons Example: Contrast (P89) Selecting from a different screen (1) Example: Menu position (P104) Selecting from a different screen (2) Example: Tracking (P83) 5Pressing the MENU button causes the menu screen to disappear. 1. Select [Contrast]. 2. Use the [ ] / [ ] buttons to adjust the setting. 1. Select [Menu position]. 2. Press the OK button to display a different screen. 3. Then follow the instruction on the screen. 1. Select [Input signal...