Canon Projector WUX6010 User Manual
Here you can view all the pages of manual Canon Projector WUX6010 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
121
Menu Description
Advanced Guide
Menu Description
•When you connect the computer to the network for the first time, it is also
necessary to perform settings on the computer. In this case, consult the network
administrator regarding the necessary settings.
In a network environment where a DHCP server is operating, choose [On] on the
projector [DHCP] screen to enable the DHCP function and connect it. (P125)](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-120.png "Page 121
121
Menu Description
Advanced Guide
Menu Description
•When you connect the computer to the network for the first time, it is also
necessary to perform settings on the computer. In this case, consult the network
administrator regarding the necessary settings.
In a network environment where a DHCP server is operating, choose [On] on the
projector [DHCP] screen to enable the DHCP function and connect it. (P125)")
121 Menu Description Advanced Guide Menu Description •When you connect the computer to the network for the first time, it is also necessary to perform settings on the computer. In this case, consult the network administrator regarding the necessary settings. In a network environment where a DHCP server is operating, choose [On] on the projector [DHCP] screen to enable the DHCP function and connect it. (P125)
Page 122
Menu Description 122 Completing Projector Settings Settings described in this section apply to the network connections, setting a network password, and other aspects of networked projection. (When the input signal is Analog PC-1) MenuFunctionDetails Network settings lock Lock network settings to prevent changes.P123 Network password settingActivate or deactivate password protection for network settings.P123 Register network passwordSet a network password.P123 Network standby settingsSpecify the...
Page 123
![Page 123
123
Menu Description
Advanced Guide
Menu Description
Network settings lock
> [Network Settings] > [Network settings lock]
You can lock/unlock the network settings so that they cannot be changed.
Network password setting
> [Network settings] > [Network password setting]
You can set whether or not a password is required in order to change the projector
network settings.
Register network password
> [Network settings] > [Register network password]
Use the [ ] / [ ] / [ ] / [ ] buttons to enter the...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-122.png "Page 123
123
Menu Description
Advanced Guide
Menu Description
Network settings lock
> [Network Settings] > [Network settings lock]
You can lock/unlock the network settings so that they cannot be changed.
Network password setting
> [Network settings] > [Network password setting]
You can set whether or not a password is required in order to change the projector
network settings.
Register network password
> [Network settings] > [Register network password]
Use the [ ] / [ ] / [ ] / [ ] buttons to enter the...")
123 Menu Description Advanced Guide Menu Description Network settings lock > [Network Settings] > [Network settings lock] You can lock/unlock the network settings so that they cannot be changed. Network password setting > [Network settings] > [Network password setting] You can set whether or not a password is required in order to change the projector network settings. Register network password > [Network settings] > [Register network password] Use the [ ] / [ ] / [ ] / [ ] buttons to enter the...
Page 124
![Page 124
Menu Description
124
Network standby settings
> [Network settings] > [Network standby settings]
Specify the network function operating status in standby mode as follows.
Network function
> [Network settings] > [Network function]
Enable or disable network function.
Specifying [Off] can save energy.
OptionFunction
NormalAll network functions are available even in standby mode,
including the web screen, control over the network, and PJLink.
Low-powerAll network functions are available even in standby...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-123.png "Page 124
Menu Description
124
Network standby settings
> [Network settings] > [Network standby settings]
Specify the network function operating status in standby mode as follows.
Network function
> [Network settings] > [Network function]
Enable or disable network function.
Specifying [Off] can save energy.
OptionFunction
NormalAll network functions are available even in standby mode,
including the web screen, control over the network, and PJLink.
Low-powerAll network functions are available even in standby...")
Menu Description 124 Network standby settings > [Network settings] > [Network standby settings] Specify the network function operating status in standby mode as follows. Network function > [Network settings] > [Network function] Enable or disable network function. Specifying [Off] can save energy. OptionFunction NormalAll network functions are available even in standby mode, including the web screen, control over the network, and PJLink. Low-powerAll network functions are available even in standby...
Page 125
![Page 125
125
Menu Description
Advanced Guide
Menu Description
Detailed settings
> [Network settings] > [Detailed settings]
Display and manually change the IP address, gateway address, and other settings.
Available only when the network function is [On].
MenuFunction
IP address IP address of the projector.
Gateway address Gateway address of the projector.
MAC address MAC address of the projector.
DHCP
TCP/IP settingsChange or specify the IP address, subnet mask, and gateway address
used for connections....](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-124.png "Page 125
125
Menu Description
Advanced Guide
Menu Description
Detailed settings
> [Network settings] > [Detailed settings]
Display and manually change the IP address, gateway address, and other settings.
Available only when the network function is [On].
MenuFunction
IP address IP address of the projector.
Gateway address Gateway address of the projector.
MAC address MAC address of the projector.
DHCP
TCP/IP settingsChange or specify the IP address, subnet mask, and gateway address
used for connections....")
125 Menu Description Advanced Guide Menu Description Detailed settings > [Network settings] > [Detailed settings] Display and manually change the IP address, gateway address, and other settings. Available only when the network function is [On]. MenuFunction IP address IP address of the projector. Gateway address Gateway address of the projector. MAC address MAC address of the projector. DHCP TCP/IP settingsChange or specify the IP address, subnet mask, and gateway address used for connections....
Page 126
![Page 126
Menu Description
126
Network setting
initializationThe following network settings are initialized.
Settings configured from the projector menu (P131)
•Network password setting (P123)
•Register network password (P123)
•Network function (P124)
•Detailed settings(P125)
•PJLink (P127)
•AMX Device Discovery (P128)
•Crestron RoomView (P128)
Settings configured from the web screen
•[Password] (P135)
•[Network] (P136)
•[NMPJ Password] (P137)
•[Mail] (P138)
•[Mail auth] (P139)
•[SNMP] (P140)
•[Projector info.]...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-125.png "Page 126
Menu Description
126
Network setting
initializationThe following network settings are initialized.
Settings configured from the projector menu (P131)
•Network password setting (P123)
•Register network password (P123)
•Network function (P124)
•Detailed settings(P125)
•PJLink (P127)
•AMX Device Discovery (P128)
•Crestron RoomView (P128)
Settings configured from the web screen
•[Password] (P135)
•[Network] (P136)
•[NMPJ Password] (P137)
•[Mail] (P138)
•[Mail auth] (P139)
•[SNMP] (P140)
•[Projector info.]...")
Menu Description 126 Network setting initializationThe following network settings are initialized. Settings configured from the projector menu (P131) •Network password setting (P123) •Register network password (P123) •Network function (P124) •Detailed settings(P125) •PJLink (P127) •AMX Device Discovery (P128) •Crestron RoomView (P128) Settings configured from the web screen •[Password] (P135) •[Network] (P136) •[NMPJ Password] (P137) •[Mail] (P138) •[Mail auth] (P139) •[SNMP] (P140) •[Projector info.]...
Page 127
![Page 127
127
Menu Description
Advanced Guide
Menu Description
PJLink
> [Network settings] > [PJLink]
You can enable or disable the PJLink network function of the projector.
When this function is enabled, control is possible over a network using PJLink
commands.
OptionFunction
Off Disables the PJLink function.
On Enables the PJLink function.
• The projector conforms to Class 1 as defined in PJLink standards established by the
Japan Business Machine and Information System Industries Association (JBMIA). This...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-126.png "Page 127
127
Menu Description
Advanced Guide
Menu Description
PJLink
> [Network settings] > [PJLink]
You can enable or disable the PJLink network function of the projector.
When this function is enabled, control is possible over a network using PJLink
commands.
OptionFunction
Off Disables the PJLink function.
On Enables the PJLink function.
• The projector conforms to Class 1 as defined in PJLink standards established by the
Japan Business Machine and Information System Industries Association (JBMIA). This...")
127 Menu Description Advanced Guide Menu Description PJLink > [Network settings] > [PJLink] You can enable or disable the PJLink network function of the projector. When this function is enabled, control is possible over a network using PJLink commands. OptionFunction Off Disables the PJLink function. On Enables the PJLink function. • The projector conforms to Class 1 as defined in PJLink standards established by the Japan Business Machine and Information System Industries Association (JBMIA). This...
Page 128
![Page 128
Menu Description
128
AMX Device Discovery
> [Network settings] > [AMX Device Discovery]
In a network environment, AMX Device Discovery can be used to enable other
equipment to discover the projector. For networks without AMX Device Discovery,
select [Off].
Crestron RoomView
> [Network settings] > [Crestron RoomView]
Crestron RoomView enables centralized management of multiple projectors over a
network. Networked projectors can be remotely controlled to troubleshoot issues,
check the useful life of...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-127.png "Page 128
Menu Description
128
AMX Device Discovery
> [Network settings] > [AMX Device Discovery]
In a network environment, AMX Device Discovery can be used to enable other
equipment to discover the projector. For networks without AMX Device Discovery,
select [Off].
Crestron RoomView
> [Network settings] > [Crestron RoomView]
Crestron RoomView enables centralized management of multiple projectors over a
network. Networked projectors can be remotely controlled to troubleshoot issues,
check the useful life of...")
Menu Description 128 AMX Device Discovery > [Network settings] > [AMX Device Discovery] In a network environment, AMX Device Discovery can be used to enable other equipment to discover the projector. For networks without AMX Device Discovery, select [Off]. Crestron RoomView > [Network settings] > [Crestron RoomView] Crestron RoomView enables centralized management of multiple projectors over a network. Networked projectors can be remotely controlled to troubleshoot issues, check the useful life of...
Page 129
![Page 129
129
Menu Description
Advanced Guide
Menu Description
Completing Computer Settings
Specifying an IP Address
Instructions for setting a computer’s IP address are as follows for each operating
system.
■Windows 8 / 8.1
1Right-click on the start screen background and click [All Apps] in the
lower right.
•Windows 8.1 Users:
Click the down arrow in the lower left of the start screen.
2Click [Control Panel].
•From the Desktop:
Press Win+X.
In the shortcut menu displayed in the lower left, click [Control...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-128.png "Page 129
129
Menu Description
Advanced Guide
Menu Description
Completing Computer Settings
Specifying an IP Address
Instructions for setting a computer’s IP address are as follows for each operating
system.
■Windows 8 / 8.1
1Right-click on the start screen background and click [All Apps] in the
lower right.
•Windows 8.1 Users:
Click the down arrow in the lower left of the start screen.
2Click [Control Panel].
•From the Desktop:
Press Win+X.
In the shortcut menu displayed in the lower left, click [Control...")
129 Menu Description Advanced Guide Menu Description Completing Computer Settings Specifying an IP Address Instructions for setting a computer’s IP address are as follows for each operating system. ■Windows 8 / 8.1 1Right-click on the start screen background and click [All Apps] in the lower right. •Windows 8.1 Users: Click the down arrow in the lower left of the start screen. 2Click [Control Panel]. •From the Desktop: Press Win+X. In the shortcut menu displayed in the lower left, click [Control...
Page 130
![Page 130
Menu Description
130
■Windows 7
1From the PC [Start] menu, select [Control Panel].
2Click on [Network and Internet], then click on [View network status and
tasks].
3From the menu on the left side of the window, click on [Change adapter
settings].
4Right-click [Local Area Connection], and open [Properties].
5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).
6Select [Use the...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-129.png "Page 130
Menu Description
130
■Windows 7
1From the PC [Start] menu, select [Control Panel].
2Click on [Network and Internet], then click on [View network status and
tasks].
3From the menu on the left side of the window, click on [Change adapter
settings].
4Right-click [Local Area Connection], and open [Properties].
5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).
6Select [Use the...")
Menu Description 130 ■Windows 7 1From the PC [Start] menu, select [Control Panel]. 2Click on [Network and Internet], then click on [View network status and tasks]. 3From the menu on the left side of the window, click on [Change adapter settings]. 4Right-click [Local Area Connection], and open [Properties]. 5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties] button. Make a note of the original network settings (IP address, subnet mask, default gateway, etc). 6Select [Use the...