Canon Projector WUX6010 User Manual
Here you can view all the pages of manual Canon Projector WUX6010 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
81 Advanced Guide Menu Description Menu Description Input settings This section describes settings for aspect ratio, resolution, and projection from a USB flash drive. (When the input signal is Analog PC-1) Menus that are not available are grayed out or hidden. MenuFunctionDetails Aspect Select an image aspect ratio.P82 Auto PCAutomatically adjusts display position misalignment and screen flickering.P82 Input signal select Manually set a resolution to suit computer images.P82 Input signal settings...
Page 82
![Page 82
Menu Description
82
Aspect
> [Input settings] > [Aspect]
Select a projection aspect ratio for images.
Menus that are not available are grayed out or hidden.
Auto PC
> [Input settings] > [Auto PC]
Automatically adjusts display position misalignment and screen flickering.
Input signal select
> [Input settings] > [Input signal select]
Select a suitable resolution if Auto PC (P58) does not project computer images
correctly.
Select the input signal that matches the computer resolution. Press the OK...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-81.png "Page 82
Menu Description
82
Aspect
> [Input settings] > [Aspect]
Select a projection aspect ratio for images.
Menus that are not available are grayed out or hidden.
Auto PC
> [Input settings] > [Auto PC]
Automatically adjusts display position misalignment and screen flickering.
Input signal select
> [Input settings] > [Input signal select]
Select a suitable resolution if Auto PC (P58) does not project computer images
correctly.
Select the input signal that matches the computer resolution. Press the OK...")
Menu Description 82 Aspect > [Input settings] > [Aspect] Select a projection aspect ratio for images. Menus that are not available are grayed out or hidden. Auto PC > [Input settings] > [Auto PC] Automatically adjusts display position misalignment and screen flickering. Input signal select > [Input settings] > [Input signal select] Select a suitable resolution if Auto PC (P58) does not project computer images correctly. Select the input signal that matches the computer resolution. Press the OK...
Page 83
![Page 83
83
Menu Description
Advanced Guide
Menu Description
Input signal settings
> [Input settings] > [Input signal settings]
Complete input signal settings. Use the [ ] / [ ] buttons to adjust the levels as
needed.
SubmenuFunction
To t a l d o t sAdjust the total number of horizontal dots. Adjust it when stripes
are displayed on the screen.
TrackingFine-tune the timing of image generation from signals. Adjusts the
tracking when the image distorts or flickers.
Horizontal positionAdjust the horizontal image...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-82.png "Page 83
83
Menu Description
Advanced Guide
Menu Description
Input signal settings
> [Input settings] > [Input signal settings]
Complete input signal settings. Use the [ ] / [ ] buttons to adjust the levels as
needed.
SubmenuFunction
To t a l d o t sAdjust the total number of horizontal dots. Adjust it when stripes
are displayed on the screen.
TrackingFine-tune the timing of image generation from signals. Adjusts the
tracking when the image distorts or flickers.
Horizontal positionAdjust the horizontal image...")
83 Menu Description Advanced Guide Menu Description Input signal settings > [Input settings] > [Input signal settings] Complete input signal settings. Use the [ ] / [ ] buttons to adjust the levels as needed. SubmenuFunction To t a l d o t sAdjust the total number of horizontal dots. Adjust it when stripes are displayed on the screen. TrackingFine-tune the timing of image generation from signals. Adjusts the tracking when the image distorts or flickers. Horizontal positionAdjust the horizontal image...
Page 84
![Page 84
Menu Description
84
Split screen
> [Input settings] > [Split screen]
Two input images from devices connected to the projector can be projected side by
side.
For details on split-screen mode, see “Split-Screen Display” (P153).
Input level
> [Input settings] > [Input level]
Adjust the input level for content projected via HDMI or HDBaseT.
OptionFunction
Off Exit split-screen mode.
On Activate split-screen mode.
Settings
Network and USB input cannot be combined for split-screen display. Similarly,...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-83.png "Page 84
Menu Description
84
Split screen
> [Input settings] > [Split screen]
Two input images from devices connected to the projector can be projected side by
side.
For details on split-screen mode, see “Split-Screen Display” (P153).
Input level
> [Input settings] > [Input level]
Adjust the input level for content projected via HDMI or HDBaseT.
OptionFunction
Off Exit split-screen mode.
On Activate split-screen mode.
Settings
Network and USB input cannot be combined for split-screen display. Similarly,...")
Menu Description 84 Split screen > [Input settings] > [Split screen] Two input images from devices connected to the projector can be projected side by side. For details on split-screen mode, see “Split-Screen Display” (P153). Input level > [Input settings] > [Input level] Adjust the input level for content projected via HDMI or HDBaseT. OptionFunction Off Exit split-screen mode. On Activate split-screen mode. Settings Network and USB input cannot be combined for split-screen display. Similarly,...
Page 85
![Page 85
85
Menu Description
Advanced Guide
Menu Description
Color space
> [Input settings] > [Color space]
Select the color space for HDMI or HDBaseT signals.
Over scan
> [Input settings] > [Over scan]
Select this setting to trim peripheral distortion from content projected via HDMI or
HDBaseT.
• You can select this only when the type of signal sent from AV equipment is RGB.
• In [Auto] mode, the signal level is selected automatically. (Some AV equipment and
HDBaseT transmitters may not support this.)
• If...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-84.png "Page 85
85
Menu Description
Advanced Guide
Menu Description
Color space
> [Input settings] > [Color space]
Select the color space for HDMI or HDBaseT signals.
Over scan
> [Input settings] > [Over scan]
Select this setting to trim peripheral distortion from content projected via HDMI or
HDBaseT.
• You can select this only when the type of signal sent from AV equipment is RGB.
• In [Auto] mode, the signal level is selected automatically. (Some AV equipment and
HDBaseT transmitters may not support this.)
• If...")
85 Menu Description Advanced Guide Menu Description Color space > [Input settings] > [Color space] Select the color space for HDMI or HDBaseT signals. Over scan > [Input settings] > [Over scan] Select this setting to trim peripheral distortion from content projected via HDMI or HDBaseT. • You can select this only when the type of signal sent from AV equipment is RGB. • In [Auto] mode, the signal level is selected automatically. (Some AV equipment and HDBaseT transmitters may not support this.) • If...
Page 86
![Page 86
Menu Description
86
Progressive
> [Input settings] > [Progressive]
Performs progressive processing optimized for still images in cinematic content or
moving images in videos.
Slideshow interval
> [Input settings] > [Slideshow interval]
You can project images on a USB flash drive automatically, one after another.
Use the [ ] / [ ] buttons to set the interval after which images are switched in a
range of 1 seconds to 60 minutes, in the format min.:sec.
Animation effect
> [Input settings] > [Animation...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-85.png "Page 86
Menu Description
86
Progressive
> [Input settings] > [Progressive]
Performs progressive processing optimized for still images in cinematic content or
moving images in videos.
Slideshow interval
> [Input settings] > [Slideshow interval]
You can project images on a USB flash drive automatically, one after another.
Use the [ ] / [ ] buttons to set the interval after which images are switched in a
range of 1 seconds to 60 minutes, in the format min.:sec.
Animation effect
> [Input settings] > [Animation...")
Menu Description 86 Progressive > [Input settings] > [Progressive] Performs progressive processing optimized for still images in cinematic content or moving images in videos. Slideshow interval > [Input settings] > [Slideshow interval] You can project images on a USB flash drive automatically, one after another. Use the [ ] / [ ] buttons to set the interval after which images are switched in a range of 1 seconds to 60 minutes, in the format min.:sec. Animation effect > [Input settings] > [Animation...
Page 87
87 Menu Description Advanced Guide Menu Description Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. (When the input signal is Analog PC-1) Menus that are not available are grayed out or hidden. * Any adjustments you make are stored for each combination of input signal and image mode. MenuFunctionDetails Image mode * Select overall image quality to suit the projected image.P88 Create profile Save desired image quality settings as profiles.P88...
Page 88
![Page 88
Menu Description
88
Image mode
> [Image adjustment] > [Image mode]
Select the overall image quality for projected images. Can also be selected by
pressing the IMAGE button on the remote control. (P70)
Menus that are not available are grayed out or hidden.
Create profile
> [Image adjustment] > [Create profile]
Save desired image quality settings in up to five user profiles.
Option
Function
Room
BrightnessTypes of ImagesGood For
Standard BrightComputer screens, or
media played with video...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-87.png "Page 88
Menu Description
88
Image mode
> [Image adjustment] > [Image mode]
Select the overall image quality for projected images. Can also be selected by
pressing the IMAGE button on the remote control. (P70)
Menus that are not available are grayed out or hidden.
Create profile
> [Image adjustment] > [Create profile]
Save desired image quality settings in up to five user profiles.
Option
Function
Room
BrightnessTypes of ImagesGood For
Standard BrightComputer screens, or
media played with video...")
Menu Description 88 Image mode > [Image adjustment] > [Image mode] Select the overall image quality for projected images. Can also be selected by pressing the IMAGE button on the remote control. (P70) Menus that are not available are grayed out or hidden. Create profile > [Image adjustment] > [Create profile] Save desired image quality settings in up to five user profiles. Option Function Room BrightnessTypes of ImagesGood For Standard BrightComputer screens, or media played with video...
Page 89
![Page 89
89
Menu Description
Advanced Guide
Menu Description
Brightness
> [Image adjustment] > [Brightness]
Adjust image brightness.
Contrast
> [Image adjustment] > [Contrast]
Sharpen or soften image contrast.
Sharpness
> [Image adjustment] > [Sharpness]
Adjust image sharpness.
Gamma
> [Image adjustment] > [Gamma]
Correct image areas that are too dark or too bright to see clearly. Can also be
selected by pressing the GAMMA button on the remote control.
Color adjustment
> [Image adjustment] > [Color...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-88.png "Page 89
89
Menu Description
Advanced Guide
Menu Description
Brightness
> [Image adjustment] > [Brightness]
Adjust image brightness.
Contrast
> [Image adjustment] > [Contrast]
Sharpen or soften image contrast.
Sharpness
> [Image adjustment] > [Sharpness]
Adjust image sharpness.
Gamma
> [Image adjustment] > [Gamma]
Correct image areas that are too dark or too bright to see clearly. Can also be
selected by pressing the GAMMA button on the remote control.
Color adjustment
> [Image adjustment] > [Color...")
89 Menu Description Advanced Guide Menu Description Brightness > [Image adjustment] > [Brightness] Adjust image brightness. Contrast > [Image adjustment] > [Contrast] Sharpen or soften image contrast. Sharpness > [Image adjustment] > [Sharpness] Adjust image sharpness. Gamma > [Image adjustment] > [Gamma] Correct image areas that are too dark or too bright to see clearly. Can also be selected by pressing the GAMMA button on the remote control. Color adjustment > [Image adjustment] > [Color...
Page 90
![Page 90
Menu Description
90
Advanced adjustment
> [Image adjustment] > [Advanced adjustment]
Fine-tune noise reduction and color tone.
Ambient light
Minimize the effect of ambient light on the screen.
OptionFunction
Off Projects an image with no correction.
AdjustTy p eTungstenFor ambient light from conventional light bulbs
or fluorescent light of this color.
FluorescentFor ambient light from a “day white” fluorescent
source.
LevelLFor an ordinary brightness of ambient light.
HFor bright ambient light.
Random...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-89.png "Page 90
Menu Description
90
Advanced adjustment
> [Image adjustment] > [Advanced adjustment]
Fine-tune noise reduction and color tone.
Ambient light
Minimize the effect of ambient light on the screen.
OptionFunction
Off Projects an image with no correction.
AdjustTy p eTungstenFor ambient light from conventional light bulbs
or fluorescent light of this color.
FluorescentFor ambient light from a “day white” fluorescent
source.
LevelLFor an ordinary brightness of ambient light.
HFor bright ambient light.
Random...")
Menu Description 90 Advanced adjustment > [Image adjustment] > [Advanced adjustment] Fine-tune noise reduction and color tone. Ambient light Minimize the effect of ambient light on the screen. OptionFunction Off Projects an image with no correction. AdjustTy p eTungstenFor ambient light from conventional light bulbs or fluorescent light of this color. FluorescentFor ambient light from a “day white” fluorescent source. LevelLFor an ordinary brightness of ambient light. HFor bright ambient light. Random...