Canon Projector WUX6010 User Manual

51
Connection Procedure
Basic Guide
Connection Procedure
Connecting AV Equipment
Amplified 
speakers
Mini jackRCA 
terminal
Mini jackRCA 
terminalAV equipment
D terminalRCA component 
terminal
Audio 
cable
(not 
included)Audio 
cable 
(not 
included)D terminal 
plug - RCA 
plug 
component 
conversion 
cable (not 
included)RCA plug - 
RCA plug 
component 
cable (not 
included)
Component cable 
(not included)
HDBaseT terminal
HDMI terminal
AUDIO IN 2 
terminalANALOG PC-2 / 
COMPONENT terminal
AUDIO OUT...

Connection Procedure
52
Plugging the Projector In
Connect the power cord to the projector and plug it in.
Notes on HDBaseT
• Use a shielded cable rated at CAT5e or better.
• Maximum transmission distance is 100 m.
• However, maximum transmission distance may be shorter in some environments.
• Do not use the LAN cable when it is coiled or bundled.
• Inserting or removing the LAN cable during projection may cause noise.
• Connectivity with all HDBaseT transmitters on the market is not guaranteed.
• Some...

53
Basic Guide
Projection Procedure
Projection Procedure
Step 1 Turn the Projector On
1Check the connection between the projector and the computer or AV 
equipment. (P49 - P51)
For instructions on connecting the power cord, refer to “Plugging the Projector 
In” (P52).
2Press the POWER button.
The [POWER ON] indicator initially flashes green, after which it remains lit.
The countdown window is displayed for approximately 20 seconds, and then 
the projection is started. Press the OK button to hide the...

54
Projection Procedure
■When the Language Selection Screen Appears
A screen appears when the projector is turned on for the first time. You can select a 
language to be used by the projector for displaying menus and messages in the 
window. Select the desired language with the pointer buttons and press the OK 
button.
You can change the language from the menu at a later time. (P114)
If the language selection screen is out of focus, adjust the focus. (P59
)
■When the Password Input Screen Appears
If you...

Projection Procedure
55
Basic Guide
Projection Procedure
Changing Notebook Computer Screen Output
For projection from a notebook computer, the computer settings must be adjusted 
to switch display output.
This operation is not required for a desktop computer.
■Turning on External Monitor Output
You can turn on the external monitor output via keyboard operation.
To turn on the external monitor output with most computers, press the function key 
([F1] to [F12]) which is marked with the external monitor...

56
Projection Procedure
Step 2 Select an Input Signal
Select the input signal in the [Input] menu when you want to project a digital PC or 
AV equipment signal, or to switch between inputs when multiple computers or 
multiple sets of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
1Press the INPUT button to display the window shown below.
The currently active input signal is marked with a green circle and enclosed by 
a orange border.
Names...

Projection Procedure
57
Basic Guide
Projection Procedure
Step 3 Adjust the Image
Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the 
computer to the resolution closest to the output signal resolution of the projector. 
(P180)
Maximum resolution
1920 X 1200 dots
■Windows 8 / 8.1
1Move the cursor toward the upper or lower right corner to access the 
menu.
2Click [Settings], and then click [Control Panel].
3From [Control Panel...

58
Projection Procedure
■Windows Vista
1Open the [Control Panel] from the start 
menu, then select [Appearance and 
Personalization] - [Adjust screen 
resolution] in the [Control Panel Home].
2Select the resolution closest to the 
maximum output signal resolution of the 
projector from the [Resolution] list.
3Click the [OK] button.
■Mac OS X
1Open the Apple Menu and select 
[System Preferences].
2In the [System Preferences] window, 
click the [Displays] icon to display the 
Display window.
3Select the...

Projection Procedure
59
Basic Guide
Projection Procedure
Focusing, Resizing, or Moving the Image
■Adjusting Image Focus
To adjust the focus, press the FOCUS button on the remote control or the LENS 
button on the projector.
For the projection distances of the lens unit, refer to “Relationship Between Image 
Size and Projecting Distance” on page 43.
1Press either the FOCUS button on the remote control or the LENS button 
on the projector to display the focus adjustment window.
2Press the pointer buttons...

60
Projection Procedure
■Adjusting Image Size
The size of the projected image can be adjusted by pressing the ZOOM button on 
the remote control or the LENS button on the projector. Change the projector 
installation position if your desired image is too large or too small to adjust it with 
the zoom function. (P40)
1Press either the ZOOM button on the remote control or the LENS button 
on the projector twice to display the zoom adjustment window.
2Press the pointer buttons to adjust the image size....