Canon Projector WUX6010 User Manual

21
Before Installation
Before Installation
■When Using Mounted on the Ceiling
When the projector is used mounted on the 
ceiling or installed in a high location, it is 
necessary to periodically clean the air 
intake and exhaust vents, and the area 
around the air filter. Dust that accumulates 
in intake or exhaust vents may impair 
ventilation, raising the temperature inside 
and posing a risk of damage or fire. Use a 
vacuum cleaner or similar means to 
remove dust from the intake vent and 
exhaust vent. 

Before Installation
22
■Install Facing in the Correct Direction
When installing the projector facing upward or downward, specify which way the projector 
is facing in [Install settings] > [Professional settings] > [Vertical projection]. (P99)
• The projector can be installed facing any direction*1, as shown 
below. However, projection upward or downward may shorten the 
useful life of the lamp. [Install settings] of the projector must also 
be adjusted. Specifically, for upward or downward projection,...

23
Before Installation
Before InstallationCopyright Notice
Please note that enlarging or reducing the size of an image for commercial 
purposes or public presentation may infringe on the legally protected copyright 
or the copyright holder of the original material.
Ensure Network Security
Take measures to ensure network security. Note that Canon is not liable in any 
way for direct or indirect loss from network security incidents, such as 
unauthorized access.
Examples of Security Measures
•Use in an...

24
Open Source Software
The product contains Open Source Software modules. For details, refer to the third-
party software license file “Third-Party Software” in the License folder of the user’s 
manual CD-ROM. Each module’s license conditions are also available in the same 
folder.
■Software under the GNU General Public License Version 2
Contained programs are free software; you can redistribute them and/or modify 
them under the terms of the GNU General Public License attached to each copy of 
the...

25
Before Use
Before Use
Projector Highlights
High-Resolution LCOS Projection
Projection at 1920x1200 (WUXGA), thanks to high-resolution reflective liquid 
crystal on silicon (LCOS) panels.
HDBaseT Input
The projector supports HDBaseT, a next-generation connectivity standard. 
HDBaseT offers a convenient connection for carrying high-quality video and audio 
signals equivalent to HDMI across distances up to 100 m over a single LAN cable.
This port can also be used to connect the projector to a network....

Before Use
26
Split-Screen Display
Splits the screen for projection of 
two separate input signals at once. 
(P153) 
Edge Blending
Blend the overlapping edges of images 
from multiple projectors to make the 
overall image more seamless. (P154) 
Networked Multi-Projection (NMPJ) 
Project images from multiple computers via a network connection.
For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user’s 
manual.
LAN 

27
Before Use
Before Use
Included Accessories
Before use, make sure the following items are included in the package.
• Remote control• Batteries for the remote control
(AAA size x2)
(part No.: RS-RC04)
Optional remote controls are also 
available (RS-RC05). The RS-RC05 
can also be used as a wired remote. 
(P37)
• Computer cable (1.8 m / 5.9)
(mini D-sub 15-pin / mini D-sub 15-pin)• Power cord 
(1.8 m / 5.9)For Continental 
Europe
• User’s Manual (CD-ROM) For the U.S.A. 
and Canada
• Warranty Card •...

Before Use
28
Part Names
Projector
■Rear Side
Terminals and 
connectorsInfrared remote receiver 
(P37)Lens unit (sold separately)
Air intake vent Power cord connector (P52)
Side control (P29)
Air filter frame (P164)
Anti-theft lock hole
An anti-theft wire cable (not included) can be connected.
Do not block the air intake.
Doing so may cause a 
malfunction.
Exhaust vent
Infrared remote receiver (P37)
Do not block the air exhaust. 
Doing so may cause a 
malfunction.
Lamp cover 

29
Before Use
Before Use
■Bottom Side
Side Control
Adjustable feet (P40)Bolt holes for installation of 
ceiling attachment
(1) POWER button (P53, P71)
Turns the projector on or off.
(2) MENU button (P78)
Displays a menu on the screen.
(3) LENS button
Each time the button is pressed, 
the screen changes to focus 
adjustment (P59), zoom (image 
size) adjustment (P60), or lens shift 
(image position) adjustment (P61). 
To adjust, use the [ ] / [ ] or the 
[ ] / [ ] buttons.(4) INPUT button (P56)
Switches...

Before Use
30
LED Indicators
The projector status is shown by the LED indicators (off / lit / flashing).
•POWER ON (green) : Lights up or flashes under normal conditions when the 
power is on.
•STAND BY (red) : Lights up or flashes during standby or when the projector 
is shut down.
•WARNING (red) : Lights up or flashes when an error occurs.
•LAMP (orange) : Lights up or flashes when a problem occurs with the lamp 
or lamp cover.
•TEMP (red) : Lights up or flashes when the internal temperature is 
high.