Canon Projector WUX6010 User Manual
Here you can view all the pages of manual Canon Projector WUX6010 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
91 Menu Description Advanced Guide Menu Description MPEG noise reduction Reduce MPEG image noise*. * Block noise resembles pixelation and may affect either on JPEG images or in MPEG video. OptionFunction Off Disables MPEG noise reduction. Weak Middle StrongSpecify one of three levels of intensity of the MPEG noise reduction. Mosquito noise reduction Reduce mosquito noise*. * A type of noise affecting image edges or areas where colors change significantly, either on JPEG images or in MPEG video....
Page 92
![Page 92
Menu Description
92
6-axis color adjust
Fine-tune RGB (red, green, blue) and CMY (cyan, magenta, yellow) hues in images.
OptionFunction
Off Disables 6-axis color adjustment.
Adjust
Use the [ ] / [ ] buttons to select [ Hue], [ Saturation], or
[ Brightness], and use the [ ] / [ ] buttons for adjustment.
•When you are finished adjusting the color, press the OK button.
Reset Returns all adjustment values to zero.
Fine-Tune Gamma
Adjust white, red, green, and blue gamma curves. Red, green, and blue can be...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-91.png "Page 92
Menu Description
92
6-axis color adjust
Fine-tune RGB (red, green, blue) and CMY (cyan, magenta, yellow) hues in images.
OptionFunction
Off Disables 6-axis color adjustment.
Adjust
Use the [ ] / [ ] buttons to select [ Hue], [ Saturation], or
[ Brightness], and use the [ ] / [ ] buttons for adjustment.
•When you are finished adjusting the color, press the OK button.
Reset Returns all adjustment values to zero.
Fine-Tune Gamma
Adjust white, red, green, and blue gamma curves. Red, green, and blue can be...")
Menu Description 92 6-axis color adjust Fine-tune RGB (red, green, blue) and CMY (cyan, magenta, yellow) hues in images. OptionFunction Off Disables 6-axis color adjustment. Adjust Use the [ ] / [ ] buttons to select [ Hue], [ Saturation], or [ Brightness], and use the [ ] / [ ] buttons for adjustment. •When you are finished adjusting the color, press the OK button. Reset Returns all adjustment values to zero. Fine-Tune Gamma Adjust white, red, green, and blue gamma curves. Red, green, and blue can be...
Page 93
![Page 93
93
Menu Description
Advanced Guide
Menu Description
Lamp mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness reduces power consumption and cooling fan noise.
Lamp control
Dims the lamp automatically when the input signal is completely black.
OptionFunction
Off No lamp control.
OnLamp control. Dims the lamp in response to fully black input signals. Normal
brightness is restored once the input signal changes from fully black.
•The projector automatically enters standby mode if the lamp...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-92.png "Page 93
93
Menu Description
Advanced Guide
Menu Description
Lamp mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness reduces power consumption and cooling fan noise.
Lamp control
Dims the lamp automatically when the input signal is completely black.
OptionFunction
Off No lamp control.
OnLamp control. Dims the lamp in response to fully black input signals. Normal
brightness is restored once the input signal changes from fully black.
•The projector automatically enters standby mode if the lamp...")
93 Menu Description Advanced Guide Menu Description Lamp mode > [Image adjustment] > [Lamp mode] Reducing the lamp brightness reduces power consumption and cooling fan noise. Lamp control Dims the lamp automatically when the input signal is completely black. OptionFunction Off No lamp control. OnLamp control. Dims the lamp in response to fully black input signals. Normal brightness is restored once the input signal changes from fully black. •The projector automatically enters standby mode if the lamp...
Page 94
![Page 94
Menu Description
94
Reset
> [Image adjustment] > [Reset]
Restore the current image quality settings to the factory defaults.
Image priority
> [Image adjustment] > [Image priority]
Select which side image adjustment settings to apply in split-screen mode.
OptionFunction
OK Resets the image adjustment settings.
Cancel Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will
restore the settings originally saved for that...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-93.png "Page 94
Menu Description
94
Reset
> [Image adjustment] > [Reset]
Restore the current image quality settings to the factory defaults.
Image priority
> [Image adjustment] > [Image priority]
Select which side image adjustment settings to apply in split-screen mode.
OptionFunction
OK Resets the image adjustment settings.
Cancel Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will
restore the settings originally saved for that...")
Menu Description 94 Reset > [Image adjustment] > [Reset] Restore the current image quality settings to the factory defaults. Image priority > [Image adjustment] > [Image priority] Select which side image adjustment settings to apply in split-screen mode. OptionFunction OK Resets the image adjustment settings. Cancel Cancels resetting of the image adjustment settings. • Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will restore the settings originally saved for that...
Page 95
95 Menu Description Advanced Guide Menu Description Install settings Adjust projection to suit the screen or the type of images, or how the projector is installed. (When the input signal is Analog PC-1) MenuFunctionDetails Positional lockOperation of installation related functions can be prohibited.P96 Image flip H/VSpecify settings for projection from behind the screen, from the ceiling, or both.P96 Screen aspectSelect an aspect ratio that matches that of the projection screen. (P63)P96...
Page 96
![Page 96
Menu Description
96
Positional lock
> [Install settings] > [Positional lock]
Operation of installation-related functions can be prohibited.
•Image flip H/V • Screen aspect • Keystone
•Save position (in [Lens - Position]) • Lens shift reset
•Digital image shift • Professional settings
Press the OK button to confirm the setting, and then press the MENU button.
Image flip H/V
> [Install settings] > [Image flip H/V]
Specify the orientation of how the projector is installed.
Screen aspect
>...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-95.png "Page 96
Menu Description
96
Positional lock
> [Install settings] > [Positional lock]
Operation of installation-related functions can be prohibited.
•Image flip H/V • Screen aspect • Keystone
•Save position (in [Lens - Position]) • Lens shift reset
•Digital image shift • Professional settings
Press the OK button to confirm the setting, and then press the MENU button.
Image flip H/V
> [Install settings] > [Image flip H/V]
Specify the orientation of how the projector is installed.
Screen aspect
>...")
Menu Description 96 Positional lock > [Install settings] > [Positional lock] Operation of installation-related functions can be prohibited. •Image flip H/V • Screen aspect • Keystone •Save position (in [Lens - Position]) • Lens shift reset •Digital image shift • Professional settings Press the OK button to confirm the setting, and then press the MENU button. Image flip H/V > [Install settings] > [Image flip H/V] Specify the orientation of how the projector is installed. Screen aspect >...
Page 97
![Page 97
97
Menu Description
Advanced Guide
Menu Description
Zoom
> [Install settings] > [Zoom]
When the Short Fixed Lens is attached and if the projected image does not fit on
the screen, you can display the image by electronically reducing its size. This type
of zooming reduces overall image dimensions, relative to the center of the image.
Press the [ ] button on the remote control to project images at a reduced size, and
press the [ ] button to enlarge images to full size. Images can be projected at 75-...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-96.png "Page 97
97
Menu Description
Advanced Guide
Menu Description
Zoom
> [Install settings] > [Zoom]
When the Short Fixed Lens is attached and if the projected image does not fit on
the screen, you can display the image by electronically reducing its size. This type
of zooming reduces overall image dimensions, relative to the center of the image.
Press the [ ] button on the remote control to project images at a reduced size, and
press the [ ] button to enlarge images to full size. Images can be projected at 75-...")
97 Menu Description Advanced Guide Menu Description Zoom > [Install settings] > [Zoom] When the Short Fixed Lens is attached and if the projected image does not fit on the screen, you can display the image by electronically reducing its size. This type of zooming reduces overall image dimensions, relative to the center of the image. Press the [ ] button on the remote control to project images at a reduced size, and press the [ ] button to enlarge images to full size. Images can be projected at 75-...
Page 98
![Page 98
Menu Description
98
Digital image shift
> [Install settings] > [Digital image shift]
Moves the position of the projected image.
For 16:9 D. Image Shift, move images vertically using the [ ] / [ ] buttons, and for
4:3 D. Image Shift, move images horizontally using the [ ] / [ ] buttons.
Professional settings
> [Install settings] > [Professional settings]
Specify advanced installation settings.
This cannot be selected when the screen aspect is 16:9, 16:10 or 4:3.
Micro-digital image shift
Use this...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-97.png "Page 98
Menu Description
98
Digital image shift
> [Install settings] > [Digital image shift]
Moves the position of the projected image.
For 16:9 D. Image Shift, move images vertically using the [ ] / [ ] buttons, and for
4:3 D. Image Shift, move images horizontally using the [ ] / [ ] buttons.
Professional settings
> [Install settings] > [Professional settings]
Specify advanced installation settings.
This cannot be selected when the screen aspect is 16:9, 16:10 or 4:3.
Micro-digital image shift
Use this...")
Menu Description 98 Digital image shift > [Install settings] > [Digital image shift] Moves the position of the projected image. For 16:9 D. Image Shift, move images vertically using the [ ] / [ ] buttons, and for 4:3 D. Image Shift, move images horizontally using the [ ] / [ ] buttons. Professional settings > [Install settings] > [Professional settings] Specify advanced installation settings. This cannot be selected when the screen aspect is 16:9, 16:10 or 4:3. Micro-digital image shift Use this...
Page 99
99 Menu Description Advanced Guide Menu Description Fan mode Switch the fan mode to suit installation at low or high altitudes (above 2,300 m (7,545.8)). OptionFunction Normal Setting for altitudes lower than 2,300 m (7,545.8). High altitude Setting for altitudes of 2,300 m (7,545.8) or higher. Vertical projection You can ensure adequate cooling by switching the fan mode to suit upward- or downward- facing installations. For precautions on vertical projection, see “Install Facing in the Correct...
Page 100
![Page 100
Menu Description
100
Edge blending
Brightness and colors of overlapping edges of images from multiple projectors, which form a
blending area, can be adjusted for a more seamless appearance. For detailed instructions, see
“Projecting from Multiple Projectors at Once (Edge Blending)” (P154).
[Off] Disable blending.
[Adjust] Display the menu for blending area adjustment.
Start marker End marker
Blending area
When adjusting the image
projected from the right side
Adjustment may not eliminate different...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-99.png "Page 100
Menu Description
100
Edge blending
Brightness and colors of overlapping edges of images from multiple projectors, which form a
blending area, can be adjusted for a more seamless appearance. For detailed instructions, see
“Projecting from Multiple Projectors at Once (Edge Blending)” (P154).
[Off] Disable blending.
[Adjust] Display the menu for blending area adjustment.
Start marker End marker
Blending area
When adjusting the image
projected from the right side
Adjustment may not eliminate different...")
Menu Description 100 Edge blending Brightness and colors of overlapping edges of images from multiple projectors, which form a blending area, can be adjusted for a more seamless appearance. For detailed instructions, see “Projecting from Multiple Projectors at Once (Edge Blending)” (P154). [Off] Disable blending. [Adjust] Display the menu for blending area adjustment. Start marker End marker Blending area When adjusting the image projected from the right side Adjustment may not eliminate different...