Canon Projector WUX6010 User Manual
Here you can view all the pages of manual Canon Projector WUX6010 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
111 Menu Description Advanced Guide Menu Description HDBaseT Enable or disable HDBaseT. Refer to the following sections for details on HDBaseT connections. For video/audio details, see “Connection Procedure” (P50, P51). For network details, see “Connection Methods” (P120). OptionFunction Off Disable HDBaseT. On Enable HDBaseT. Image signal qualityThe HDBaseT input signal value received is indicated by a white line. HighIndicated by the green portion. This is the recommended level. MiddleIndicated by...
Page 112
![Page 112
Menu Description
112
Power management mode
> [System settings] > [Power management mode]
You can specify to turn the lamp or projector off automatically after a certain period
if the projector and remote control are not used, or if there is no input signal.
HDMI image input
Set the type of equipment which is connected to the HDMI port. Note that to some extent, the
[HDMI image input] setting determines which image modes are available. (P70)
OptionFunction
AutoSelect when AV equipment will be...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-111.png "Page 112
Menu Description
112
Power management mode
> [System settings] > [Power management mode]
You can specify to turn the lamp or projector off automatically after a certain period
if the projector and remote control are not used, or if there is no input signal.
HDMI image input
Set the type of equipment which is connected to the HDMI port. Note that to some extent, the
[HDMI image input] setting determines which image modes are available. (P70)
OptionFunction
AutoSelect when AV equipment will be...")
Menu Description 112 Power management mode > [System settings] > [Power management mode] You can specify to turn the lamp or projector off automatically after a certain period if the projector and remote control are not used, or if there is no input signal. HDMI image input Set the type of equipment which is connected to the HDMI port. Note that to some extent, the [HDMI image input] setting determines which image modes are available. (P70) OptionFunction AutoSelect when AV equipment will be...
Page 113
![Page 113
113
Menu Description
Advanced Guide
Menu Description
Power management duration
> [System settings] > [Power management duration]
Specify how long before the lamp is turned off or the projector enters standby,
depending on the [Power management mode] setting.
Direct power on
> [System settings] > [Direct power on]
You can turn on the projector by connecting the power cable without pressing the
POWER button.
Beep
> [System settings] > [Beep]
You can select whether a beep sounds or not when you operate...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-112.png "Page 113
113
Menu Description
Advanced Guide
Menu Description
Power management duration
> [System settings] > [Power management duration]
Specify how long before the lamp is turned off or the projector enters standby,
depending on the [Power management mode] setting.
Direct power on
> [System settings] > [Direct power on]
You can turn on the projector by connecting the power cable without pressing the
POWER button.
Beep
> [System settings] > [Beep]
You can select whether a beep sounds or not when you operate...")
113 Menu Description Advanced Guide Menu Description Power management duration > [System settings] > [Power management duration] Specify how long before the lamp is turned off or the projector enters standby, depending on the [Power management mode] setting. Direct power on > [System settings] > [Direct power on] You can turn on the projector by connecting the power cable without pressing the POWER button. Beep > [System settings] > [Beep] You can select whether a beep sounds or not when you operate...
Page 114
![Page 114
Menu Description
114
Motion blur reduction
> [System settings] > [Motion blur reduction]
Motion blur is blurring that occurs during video playback. Motion blur reduction can
make this blurring less noticeable.
Language
> [System settings] > [Language]
Select the menu display language.
OptionFunction
Off Motion blur reduction is not performed.
On Motion blur reduction is performed.
• If reducing motion blur produces distracting image noise, select [Off].
• Effects of motion blur reduction cannot be...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-113.png "Page 114
Menu Description
114
Motion blur reduction
> [System settings] > [Motion blur reduction]
Motion blur is blurring that occurs during video playback. Motion blur reduction can
make this blurring less noticeable.
Language
> [System settings] > [Language]
Select the menu display language.
OptionFunction
Off Motion blur reduction is not performed.
On Motion blur reduction is performed.
• If reducing motion blur produces distracting image noise, select [Off].
• Effects of motion blur reduction cannot be...")
Menu Description 114 Motion blur reduction > [System settings] > [Motion blur reduction] Motion blur is blurring that occurs during video playback. Motion blur reduction can make this blurring less noticeable. Language > [System settings] > [Language] Select the menu display language. OptionFunction Off Motion blur reduction is not performed. On Motion blur reduction is performed. • If reducing motion blur produces distracting image noise, select [Off]. • Effects of motion blur reduction cannot be...
Page 115
![Page 115
115
Menu Description
Advanced Guide
Menu Description
Other settings
> [System settings] > [Other settings]
Lock operation with a password, set a password, reset counters for lamp or air filter
replacement, and access other settings and information.
Password settings
Disables the projector unless the correct password is entered.
OptionFunction
Off The projector can be used even if no password is entered.
On The projector cannot be used unless you enter your password.
To Cancel the Password
Cancellation...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-114.png "Page 115
115
Menu Description
Advanced Guide
Menu Description
Other settings
> [System settings] > [Other settings]
Lock operation with a password, set a password, reset counters for lamp or air filter
replacement, and access other settings and information.
Password settings
Disables the projector unless the correct password is entered.
OptionFunction
Off The projector can be used even if no password is entered.
On The projector cannot be used unless you enter your password.
To Cancel the Password
Cancellation...")
115 Menu Description Advanced Guide Menu Description Other settings > [System settings] > [Other settings] Lock operation with a password, set a password, reset counters for lamp or air filter replacement, and access other settings and information. Password settings Disables the projector unless the correct password is entered. OptionFunction Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter your password. To Cancel the Password Cancellation...
Page 116
![Page 116
Menu Description
116
Register password
You can register a password for starting projection.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] / [ ] / [ ] buttons.
The 4-digit password is entered from the left to right digits. When the final digit is entered, the
password is automatically registered.
Press the MENU button to abort the registration.
[Fn] button settings
You can select a function to be assigned to the Fn button on a remote control.
OptionFunction
Disable Disables assigning a...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-115.png "Page 116
Menu Description
116
Register password
You can register a password for starting projection.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] / [ ] / [ ] buttons.
The 4-digit password is entered from the left to right digits. When the final digit is entered, the
password is automatically registered.
Press the MENU button to abort the registration.
[Fn] button settings
You can select a function to be assigned to the Fn button on a remote control.
OptionFunction
Disable Disables assigning a...")
Menu Description 116 Register password You can register a password for starting projection. Enter a 4 digit password. Enter the password using the [ ] / [ ] / [ ] / [ ] buttons. The 4-digit password is entered from the left to right digits. When the final digit is entered, the password is automatically registered. Press the MENU button to abort the registration. [Fn] button settings You can select a function to be assigned to the Fn button on a remote control. OptionFunction Disable Disables assigning a...
Page 117
117 Menu Description Advanced Guide Menu Description Air filter counter This resets the counter which reminds you of the time for cleaning and replacing the air filter. Firmware Update the projector firmware as follows. Download firmware updates from the Canon website and store them at the root directory on a USB flash drive. Check the version indicated before updating the firmware. For details on replacing or cleaning the filter, see P163 - P164. • Firmware versions shown here are for illustration only...
Page 118
![Page 118
Menu Description
118
Factory defaults
You can reset the menu item settings and restore the system settings to the factory defaults.
OptionFunction
OK Settings are reset to default.
Cancel Settings are not reset to default.
(1) • For HDMI (when [HDMI In] is [Computer]), Digital PC, Analog PC-1/2, HDBaseT (when
[HDBaseT In] is [Computer]) USB, or LAN, the factory default is [Off].
• For HDMI (when [HDMI In] is set to [Auto]), Component and HDBaseT (when [HDBaseT
In] is [Auto]), the default setting is...](http://img.usermanuals.tech/thumb/14/100415/w300_projector_manual_9172_d-117.png "Page 118
Menu Description
118
Factory defaults
You can reset the menu item settings and restore the system settings to the factory defaults.
OptionFunction
OK Settings are reset to default.
Cancel Settings are not reset to default.
(1) • For HDMI (when [HDMI In] is [Computer]), Digital PC, Analog PC-1/2, HDBaseT (when
[HDBaseT In] is [Computer]) USB, or LAN, the factory default is [Off].
• For HDMI (when [HDMI In] is set to [Auto]), Component and HDBaseT (when [HDBaseT
In] is [Auto]), the default setting is...")
Menu Description 118 Factory defaults You can reset the menu item settings and restore the system settings to the factory defaults. OptionFunction OK Settings are reset to default. Cancel Settings are not reset to default. (1) • For HDMI (when [HDMI In] is [Computer]), Digital PC, Analog PC-1/2, HDBaseT (when [HDBaseT In] is [Computer]) USB, or LAN, the factory default is [Off]. • For HDMI (when [HDMI In] is set to [Auto]), Component and HDBaseT (when [HDBaseT In] is [Auto]), the default setting is...
Page 119
119 Menu Description Advanced Guide Menu Description Main factory defaults System settings SubmenuDefault Value User screen settings Logo captureNot Registered Logo position Center No signal screen Blue Screen when blank Black Projector on Canon logo Interface settings Key repeat On Key lock Off Remote control channelIndependent Audio in terminal select HDMI HDMI Digital PC Audio in 1 Analog PC-1 Audio in 1 Analog PC-2 Audio in 2 Component Audio in 2 HDBaseT HDBaseT LAN LAN USB Audio in 1 HDBaseT Off...
Page 120
Menu Description 120 Network settings Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary. The following is an explanation of preparation on the computer side. Connection Methods To connect the projector to a computer network, use a LAN cable. The LAN cable can be connected to either...