Canon Projector WUX450 User Manual

							291
Appendix
Other Information
Displayed Test Patterns
The test pattern can be displayed by pressing the TEST PATTERN button. Use this 
when there is no image signal, etc.
While the test pattern is displayed, you can use the [ ] / [ ] buttons to change to a 
different test pattern. Also, if there is an option pattern available, you can use the 
[ ] / [ ] buttons to switch pattern. A dialog box is shown during test pattern display 
that identifies the current test pattern and provides operating instructions.
The following test patterns can be displayed.
Use [ ] / [ ] to 
switch patternsUse [ ] / [ ] to switch 
option patterns
Raster 100%
(White / red / green / blue)
Raster 50%
(White / red / green / blue) Color bar (1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Stairstep H
Stairstep V
Cross Hatch Border FocusMulti Checker Stairstep color
Character 
						

							292
Supported Signal Types
This projector supports the following signal types.
If your computer or AV equipment is compatible with any one of these signal types, 
the projector’s Auto PC function selects the input signal type to project an image 
appropriately.
Analog PC
Digital PC
Resolution (dots)  Signal typeHorizontal frequency 
(kHz)Vertical frequency (Hz)
640 x 480 VGA 31.469 59.940
720 x 480 – 31.469 59.940
720 x 576 – 31.250 50.000
800 x 600 SVGA 37.879 60.317
848 x 480 – 31.020 60.000
1024 x 768 XGA 48.363 60.004
1280 x 720 – 45.000*
160.000*1
1280 x 768
WXGA47.776 59.870
47.396 59.995
1280 x 80049.702 59.810
49.306 59.910
1280 x 960 – 60.000 60.000
1280 x 1024 SXGA 63.981 60.020
1366 x 768 – 47.712 59.790
1400 x 1050 SXGA+64.744 59.948
65.317 59.978
1440 x 900 WXGA+55.935 59.887
55.469 59.901
1600 x 900 – 60.000 60.000
1600 x 1200 UXGA 75.000 60.000
1680 x 1050 WSXGA+64.674 59.883
65.290 59.954
1920 x 1080 –56.250 50.000
67.500 60.000
1920 x 1200 WUXGA 74.038*
259.950*2
Resolution (dots) Signal typeHorizontal frequency 
(kHz)Vertical frequency (Hz)
640 x 480 D-VGA 31.469 59.940
720 x 480 – 31.469 59.940
720 x 576 – 31.250 50.000
800 x 600 D-SVGA 37.879 60.317
1024 x 768 D-XGA 48.363 60.004
1280 x 720 –37.500 50.000
45.000 60.000
1280 x 800 D-WXGA49.702 59.810
49.306 59.910
1280 x 1024 D-SXGA 63.981 60.020
1366 x 768 – 47.712 59.790
1400 x 1050 D-SXGA+64.744 59.948
65.317 59.978
1440 x 900 D-WXGA+55.935 59.887
55.469 59.901
1600 x 900 – 60.000 60.000
1600 x 1200 D-UXGA 75.000 60.000
1680 x 1050 D-WSXGA+64.674 59.883
65.290 59.954
1920 x 1080 –27.000 24.000
56.250 50.000
67.500 60.000 
						

							293
Supported Signal Types
Appendix
Other Information
HDMI
Connecting to a computer
Connecting with AV equipment
Component
*1: WX520/WX450ST, *2: WUX450/WUX400ST
* The specifications in the table above are subject to change without notice.
* This projector does not support any computer output signal with a dot clock of higher than 162 MHz.
* Use a computer cable in which all pins are connected. If the cable is a type in which all pins are not 
connected, the image may not be correctly displayed.1080PsF
(1920 x 1080i)–27.000 24.000
28.125 25.000
33.750 30.000
1920 x 1200 D-WUXGA 74.038*
259.950*2
Resolution (dots) Signal typeHorizontal frequency 
(kHz)Vertical frequency (Hz)
640 x 480 VGA 31.469 59.940
800 x 600 SVGA 37.879 60.317
1024 x 768 XGA 48.363 60.004
1280 x 800 WXGA49.702 59.810
49.306 59.910
1280 x 1024 SXGA  63.981 60.020
1366 x 768 – 47.712 59.790
1400 x 1050 SXGA+64.744 59.948
65.317 59.978
1440 x 900 WXGA+55.935 59.887
55.469 59.901
1600 x 900 – 60.000 60.000
1600 x 1200 UXGA 75.000 60.000
1680 x 1050 WSXGA+64.674 59.883
65.290 59.954
1920 x 1200 WUXGA 74.038*
259.950*2
Signal type Horizontal frequency (kHz) Vertical frequency (Hz)
480p 31.469 59.940
576p 31.250 50.000
720p37.500 50.000
45.000 60.000
1080i28.125 50.000
33.750 60.000
1080p27.000 24.000
56.250 50.000
67.500 60.000
Signal type Horizontal frequency (kHz) Vertical frequency (Hz)
480i 15.734 59.940
480p 31.469 59.940
576i 15.625 50.000
576p 31.250 50.000
720p37.500 50.000
45.000 60.000
1080i28.125 50.000
33.750 60.000
1080p56.250 50.000
67.500 60.000
1080PsF27.000 24.000
28.125 25.000
33.750 30.000 Resolution (dots) Signal typeHorizontal frequency 
(kHz)Vertical frequency (Hz) 
						

							294
Product Specifications
■Projector
WUX450/WX520
Model name WUX450 WX520
Display system RGB liquid crystal system
Optical systemColor separation by dichroic mirror / polarizing beam splitter 
and color composition by prism
Display device
Type Reflective liquid crystal panel
Size / Aspect ratio 0.71 x 3 / 16:10 0.70 x 3 / 16:10
Drive system Active matrix system
Number dots / Total 
number dots2,304,000 (1920 x 1200) x 
3 panels / 6,912,0001,296,000 (1440 x 900) x 
3 panels / 3,888,000
Projection lens
Zoom ratio / Focal length / 
F value1.8x / 21.7 – 39.0 mm / f2.8
Zooming / Focusing 
systemManual / Manual
Lens shiftV: 0% to +60% (manual)
H: ±10% (manual)V: 0% to +62% (manual)
H: ±10% (manual)
Light source 250-NSHA 260 W
Image size (projection 
distance)40 to 300
(1.2 m to 16.2 m / 3.9
 to 53.1) 40 to 300
(1.2 m to 16.6 m / 3.9 to 54.5)
Number of colors 16,770,000 colors (full color)
Brightness*
2 (in presentation 
mode)4500 lumen 5200 lumen
Contrast ratio*
22000:1 (Fully white:fully black, presentation mode, Iris [On])
Ratio of brightness at 
periphery to center*
290%
Speaker 5W monaural x 1
Maximum input resolution 1920 x 1200 dots 1920 x 1080 dots
Video signals
Analog PC inputWUXGA*1, WSXGA+, UXGA, WXGA+, SXGA+, SXGA, 
WXGA, XGA, SVGA, VGA
Digital PC inputD-WUXGA*
1, D-WSXGA+, D-UXGA, D-WXGA+, D-SXGA+, 
D-SXGA, D-WXGA, D-XGA, D-SVGA, D-VGA
HDMI inputFrom connected computers:
WUXGA*
1, WSXGA+, UXGA, WXGA+, SXGA+, SXGA, 
WXGA, XGA, SVGA, VGA
From connected AV equipment:
1080p, 1080i, 720p, 576p, 480p
Component video input 1080PsF, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Input terminal
DVI-I terminal Analog PC, Digital PC (29-pin DVI connector)
HDMI terminal Digital PC, digital video input (deep color only)
ANALOG PC / 
COMPONENT terminalAnalog PC, Component (mini D-sub 15-pin)
LAN terminal Networked multi-projection (RJ-45)
USB Port JPEG images (USB Mass Storage Class)
CONTROL terminal RS-232C (D-sub 9-pin)
REMOTE terminal Wired remote control (3.5ø stereo mini jack)
AUDIO IN terminal Audio signal (3.5ø stereo mini jack x 2)
AUDIO OUT terminal Audio signal (3.5ø stereo mini jack) 
						

							295
Product Specifications
Appendix
Other Information
*1WUX450 only
*2Compliance with ISO21118-2012
WUX400ST/WX450ST
Input signal
Digital PC TMDS (Transition Minimized Differential Signaling)
Analog PC0.7Vp-p, positive polarity, impedance = 75Ω
Horizontal / vertical synchronization: TTL level, negative or 
positive polarity
Component videoCOMPONENT: Separate Y Cb/Pb Cr/Pr signal
Y: 1Vp-p, negative synchronization, impedance = 75Ω
Cb/Pb: 0.7Vp-p, impedance = 75Ω
Cr/Pr: 0.7Vp-p, impedance = 75Ω
Audio Impedance = 47kΩ or more
Noise 38 / 32dB (Lamp mode: Full power/Power saver)
Operating temperature 0°C (32°F) - 40°C (104°F)
Power supply AC100V - 240V  50 / 60Hz
Power consumption (Full 
power / power saver / low-
power standby with LAN on / 
standby with LAN off)365W / 295W / 0.6W / 0.2W 355W / 285W / 0.6W / 0.2W
Dimensions337 mm (W) x 134 mm (H) x 370 mm (D) / 13.3 (W) x 5.3 (H) x 
14.6 (D) in (including the projection)
Mass 5.9 kg / 13.0 lbs
AccessoriesRemote control, remote control dry-cell batteries, power cord, 
PC cable, lens cap, User’s Manual (this manual), Important 
Information and Warranty Card
Model name WUX400ST WX450ST
Display system RGB liquid crystal system
Optical systemColor separation by dichroic mirror / polarizing beam splitter 
and color composition by prism
Display device
Type Reflective liquid crystal panel
Size / Aspect ratio 0.71 x 3 / 16:10 0.70 x 3 / 16:10
Drive system Active matrix system
Number dots / Total 
number dots2,304,000 (1920 x 1200) x 
3 panels / 6,912,0001,296,000 (1440 x 900) x 
3 panels / 3,888,000
Projection lens
Focal length / F value 8.8 mm / f2.7
Focusing system Manual
Lens shiftV: 0% to +75% (manual)
H: ±10% (manual)V: 0% to +77% (manual)
H: ±10% (manual)
Light source 250-NSHA 260 W
Image size (projection 
distance)50 to 200
(0.60 m to 2.42 m / 2.0
 to 7.4)50 to 200
(0.61 m to 2.48 m / 2.0 to 8.1)
Number of colors 16,770,000 colors (full color)
Brightness*
2 (in presentation 
mode)4000 lumen 4500 lumen
Contrast ratio*
22000:1 (Fully white:fully black, presentation mode, Iris [On]) Model name WUX450 WX520 
						

							
Product Specifications
296
*1WUX400ST only
*2Compliance with ISO21118-2012
Ratio of brightness at 
periphery to center*280%
Speaker 5W monaural x 1
Maximum input resolution 1920 x 1200 dots 1920 x 1080 dots
Video signals
Analog PC input WUXGA*1, WSXGA+, UXGA, WXGA+, SXGA+, SXGA, 
WXGA, XGA, SVGA, VGA
Digital PC input D-WUXGA*
1, D-WSXGA+, D-UXGA, D-WXGA+, D-SXGA+, 
D-SXGA, D-WXGA, D-XGA, D-SVGA, D-VGA
HDMI input From connected computers:
WUXGA*
1, WSXGA+, UXGA, WXGA+, SXGA+, SXGA, 
WXGA, XGA, SVGA, VGA
From connected AV equipment:
1080p, 1080i, 720p, 576p, 480p
Component video input 1080PsF, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Input terminal
DVI-I terminal Analog PC, Digita l PC (29-pin DVI connector)
HDMI terminal Digital PC, digital video input (deep color only)
ANALOG PC / 
COMPONENT terminal Analog PC, Component (mini D-sub 15-pin)
LAN terminal Networked multi-projection (RJ-45)
USB Port JPEG images (USB Mass Storage Class)
CONTROL terminal RS-232C (D-sub 9-pin)
REMOTE terminal Wired remote control (3.5ø stereo mini jack)
AUDIO IN terminal Audio signal (3.5ø stereo mini jack x 2)
AUDIO OUT terminal Audio signal (3.5ø stereo mini jack)
Input signal
Digital PC TMDS (Transition Minimized Differential Signaling)
Analog PC 0.7Vp-p, positive polarity, impedance = 75
Ω
Horizontal / vertical synchronization: TTL level, negative or 
positive polarity
Component video COMPONENT: Separate Y Cb/Pb Cr/Pr signal
Y: 1Vp-p, negative synchronization, impedance = 75 Ω
Cb/Pb: 0.7Vp-p, impedance = 75 Ω
Cr/Pr: 0.7Vp-p, impedance = 75 Ω
Audio Impedance = 47k Ω or more
Noise 38 / 32dB (Lamp mode: Full power/Power saver)
Operating temperature 0°C (32°F) - 40°C (104°F)
Power supply AC100V - 240V  50 / 60Hz
Power consumption (Full 
power / power saver / low-
power standby with LAN on / 
standby with LAN off) 365W / 295W / 0.6W / 0.2W 355W / 285W / 0.6W / 0.2W
Dimensions 337 mm (W) x 134 mm (H) x 415 mm (D) / 13.3 (W) x 5.3 (H) x 
16.3 (D) in (including the projection)
Mass 6.3 kg / 13.9 lbs
Accessories Remote control, remote control dry-cell batteries, power cord, 
lens cap, PC cable, User’s Manual (this manual), Important 
Information and Warranty Card
Model name WUX400ST WX450ST 
						

							297
Product Specifications
Appendix
Other Information
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels 
may stay lit or unlit due to the characteristics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of 
optical parts.
■Remote control
Model number RS-RC06
Power supply DC 3.0V, using two AAA-size batteries
Operating range Approx. 8 m ±25° horizontal and vertical (to infrared remote receiver)
Dimensions43 mm (W) x 23 mm (H) x 135 mm (D) / 
1.7 (W) x 0.9 (H) x 5.3 (D) in
Weight 56 g / 2.0 oz 
						

							Product Specifications
298
■External View
Bolt holes (M6 x 4) 
for installation of 
ceiling attachment
91.5 mm 
(3.6)
337 mm (13.3)72 mm 
(2.8)362 mm (14.3)
118 mm 
(4.6) 144.5 mm 
(5.7) 144.5 mm 
(5.7)289 mm (11.3)
33 mm (1.3)
301 mm (11.9) 370 mm (14.6)
134 mm 
(5.3)
WUX450/WX520
Bolt holes (M6 x 4) 
for installation of 
ceiling attachment
91.5 mm 
(3.6)
337 mm (13.3)72 mm 
(2.8)362 mm (14.3)
118 mm 
(4.6) 144.5 mm 
(5.7) 144.5 mm 
(5.7)289 mm (11.3)
33 mm (1.3)
301 mm (11.9) 415 mm (16.3)
134 mm 
(5.3)
WUX400ST/WX450ST 
						

							299
Product Specifications
Appendix
Other Information
■ANALOG PC-2 / COMPONENT terminal
This terminal is used as a computer ANALOG PC input or COMPONENT input 
terminal. Use a D-sub computer cable.
The terminal specifications for the ANALOG PC input and COMPONENT input are 
the same.
Mini D-sub 15-pin
■Service Port (CONTROL)
Pin assignment
Communication format
Communication mode : RS-232-C, asynchronous, half-duplex communication
Communication speed : 19200bps
Character length : 8 bits
Stop bits : 2 bits
Parity : None
Flow control : None
Pin No. Signal Pin No. Signal
1 R 9 +5 V power
2G 10Ground 
(Vertical sync.)
3 B 11 Ground
4OPEN 12DDC data
5Ground 
(Horizontal sync.)13 Horizontal sync.
6 Ground (R) 14 Vertical sync.
7 Ground (G) 15 DDC clock
8 Ground (B)
Pin No. Signal
1OPEN
2RxD
3TxD
4OPEN
5GND
6OPEN
7 Internal pull-up
8OPEN
9OPEN 
						

							Product Specifications
300
Control commands
Commands ASCII representation Binary representation
Power supplyPower on POWER=ON 50h 4Fh 57h 45h 52h 3Dh 4Fh 4Eh 0Dh
Power off POWER=OFF50h 4Fh 57h 45h 52h 3Dh 4Fh 46h 46h 
0Dh
Power status 
acquisitionGET=POWER47h 45h 54h 3Dh 50h 4Fh 57h 45h 52h 
0Dh
Input sourceHDMI INPUT=HDMI49h 4Eh 50h 55h 54h 3Dh 48h 44h 4Dh 
49h 0Dh
Digital PC INPUT=D-RGB49h 4Eh 50h 55h 54h 3Dh 44h 2Dh 52h 
47h 42h 0Dh
Analog PC-1 INPUT=A-RGB149h 4Eh 50h 55h 54h 3Dh 41h 2Dh 52h 
47h 42h 31h 0Dh
Analog PC-2 INPUT=A-RGB249h 4Eh 50h 55h 54h 3Dh 41h 2Dh 52h 
47h 42h 32h 0Dh
Component INPUT=COMP49h 4Eh 50h 55h 54h 3Dh 43h 4Fh 4Dh 
50h 0Dh
LAN INPUT=LAN49h 4Eh 50h 55h 54h 3Dh 4Ch 41h 4Eh 
0Dh
USB INPUT=USB49h 4Eh 50h 55h 54h 3Dh 55h 53h 42h 
0Dh
Input source 
acquisitionGET=INPUT47h 45h 54h 3Dh 49h 4Eh 50h 55h 54h 
0Dh
Image modeStandard IMAGE=STANDARD49h 4Dh 41h 47h 45h 3Dh 53h 54h 41h 
4Eh 44h 41h 52h 44h 0Dh
Presentation IMAGE=PRESENTATION49h 4Dh 41h 47h 45h 3Dh 50h 52h 45h 
53h 45h 4Eh 54h 41h 54h 49h 4Fh 4Eh 
0Dh
Photo/sRGB IMAGE=PHOTO_SRGB49h 4Dh 41h 47h 45h 3Dh 50h 48h 4Fh 
54h 4Fh 5Fh 53h 52h 47h 42h 0Dh
Dynamic IMAGE=DYNAMIC49h 4Dh 41h 47h 45h 3Dh 44h 59h 4Eh 
41h 4Dh 49h 43h 0Dh
Video IMAGE=VIDEO49h 4Dh 41h 47h 45h 3Dh 56h 49h 44h 
45h 4Fh 0Dh
Image modeUser 1 IMAGE=USER_149h 4Dh 41h 47h 45h 3Dh 55h 53h 45h 
52h 5Fh 31h 0Dh
User 2 IMAGE=USER_249h 4Dh 41h 47h 45h 3Dh 55h 53h 45h 
52h 5Fh 32h 0Dh
User 3 IMAGE=USER_349h 4Dh 41h 47h 45h 3Dh 55h 53h 45h 
52h 5Fh 33h 0Dh
User 4 IMAGE=USER_449h 4Dh 41h 47h 45h 3Dh 55h 53h 45h 
52h 5Fh 34h 0Dh
User 5 IMAGE=USER_549h 4Dh 41h 47h 45h 3Dh 55h 53h 45h 
52h 5Fh 35h 0Dh
Image mode 
acquisitionGET=IMAGE47h 45h 54h 3Dh 49h 4Dh 41h 47h 45h 
0Dh
BrightnessBrightness 
value settingBRI= 42h 52h 49h 3Dh  0Dh
Brightness 
acquisitionGET=BRI 47h 45h 54h 3Dh 42h 52h 49h 0Dh
Sharpness 
adjustment 
functionSharpness 
value settingSHARP=53h 48h 41h 52h 50h 3Dh  0Dh