Canon Projector WUX450 User Manual
Have a look at the manual Canon Projector WUX450 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 249
249
Networked Multi-Projection
Operation in Each Mode
Using the Projector in Broadcast Mode
In Broadcast Mode, a single computer is connected to up to 12 projectors.
Procedure
1In the mode selection menu, select [Broadcast Mode].
2The projector selection menu is displayed. In the list of projectors at left,
click the projector to connect to.
You can select up to 12 projectors. Selected projectors are listed at right.
Before projecting from projectors in other subnets in Broadcast Mode, you must...](http://img.usermanuals.tech/thumb/14/99365/w64_projector_manual_7685_d-248.png "Page 249
249
Networked Multi-Projection
Operation in Each Mode
Using the Projector in Broadcast Mode
In Broadcast Mode, a single computer is connected to up to 12 projectors.
Procedure
1In the mode selection menu, select [Broadcast Mode].
2The projector selection menu is displayed. In the list of projectors at left,
click the projector to connect to.
You can select up to 12 projectors. Selected projectors are listed at right.
Before projecting from projectors in other subnets in Broadcast Mode, you must...")
![Page 250
Using the Projector in Broadcast Mode
250
3Click [Next].
4The Broadcast Mode window is displayed. Click [Start projecting].
The computer screen is now projected.
• If the [NMPJ Password] setting has been configured on the projector’s settings screen
(P186), the password is now requested. Enter the password.
• To clear a selected projector, click in the upper right of that projector listing.
• For details on the projector selection menu, refer to “Using the Projector Selection
Menu” (P258).
To stop...](http://img.usermanuals.tech/thumb/14/99365/w64_projector_manual_7685_d-249.png "Page 250
Using the Projector in Broadcast Mode
250
3Click [Next].
4The Broadcast Mode window is displayed. Click [Start projecting].
The computer screen is now projected.
• If the [NMPJ Password] setting has been configured on the projector’s settings screen
(P186), the password is now requested. Enter the password.
• To clear a selected projector, click in the upper right of that projector listing.
• For details on the projector selection menu, refer to “Using the Projector Selection
Menu” (P258).
To stop...")
![Page 251
251
Using the Projector in Broadcast Mode
Networked Multi-Projection
Operation in Each Mode
5To end the session, click or in the upper right.
6The following confirmation message is displayed. Click [Close].
Return to the mode selection menu.](http://img.usermanuals.tech/thumb/14/99365/w64_projector_manual_7685_d-250.png "Page 251
251
Using the Projector in Broadcast Mode
Networked Multi-Projection
Operation in Each Mode
5To end the session, click or in the upper right.
6The following confirmation message is displayed. Click [Close].
Return to the mode selection menu.")
![Page 256
256
Using the Session Selection Menu
Session Selection Menu
(1) Help
View application help.
(2) Back to mode selection
Return to the mode selection menu.
(3) Minimize
Minimize the window to the taskbar. To view the window again, click the
taskbar icon.
(4) Exit
Return to the mode selection menu.
(5) [New]
Start a new session. (P226)
(6) Find session
Find sessions of projectors in another subnet. (P257)
(7) Session list
Lists the sessions detected. Information shown here includes the session
name,...](http://img.usermanuals.tech/thumb/14/99365/w64_projector_manual_7685_d-255.png "Page 256
256
Using the Session Selection Menu
Session Selection Menu
(1) Help
View application help.
(2) Back to mode selection
Return to the mode selection menu.
(3) Minimize
Minimize the window to the taskbar. To view the window again, click the
taskbar icon.
(4) Exit
Return to the mode selection menu.
(5) [New]
Start a new session. (P226)
(6) Find session
Find sessions of projectors in another subnet. (P257)
(7) Session list
Lists the sessions detected. Information shown here includes the session
name,...")
251 Using the Projector in Broadcast Mode Networked Multi-Projection Operation in Each Mode 5To end the session, click or in the upper right. 6The following confirmation message is displayed. Click [Close]. Return to the mode selection menu.
Using the Projector in Broadcast Mode 252 Broadcast Mode Window (1) Help View application help. (2) Back to mode selection Return to the mode selection menu. (3) Compact display View the window at a compact size. (P274) (4) Minimize Minimize the window to the taskbar. To view the window again, click the taskbar icon. (5) Exit Return to the mode selection menu. (6) Projector list View a list of projectors. (1) (2) (3) (4) (5) (8) (9) (10) (11) (6) (7)
253 Using the Projector in Broadcast Mode Networked Multi-Projection Operation in Each Mode (7) Projection status Shows the projected image status. (8) Switch primary/secondary monitor A number is shown here only when secondary monitor connectivity is activated on the computer you are using. Clicking the number will switch between the primary and secondary monitor. (9) Blank the projector Pause projection. Click again to resume projection. (10) Settings Display the setting window. (P272) (11) Start Start projection by the selected projector. During projection, this button is labeled [Stop projecting] and can be clicked to stop projection.
255 Table of Contents Safety Instructions Before Use Operation Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation and Maintenance Installation Connecting to a Network Maintenance Networked Multi-Projection Networked Multi-Projection Overview Operation in Each Mode Functions in All Modes AppendixOther Information Index Functions in All Modes
256 Using the Session Selection Menu Session Selection Menu (1) Help View application help. (2) Back to mode selection Return to the mode selection menu. (3) Minimize Minimize the window to the taskbar. To view the window again, click the taskbar icon. (4) Exit Return to the mode selection menu. (5) [New] Start a new session. (P226) (6) Find session Find sessions of projectors in another subnet. (P257) (7) Session list Lists the sessions detected. Information shown here includes the session name, creation date, creator nickname, and number of computers and projectors involved. (1)(2) (3) (4) (6) (8) (5) (7)
257 Using the Session Selection Menu Networked Multi-Projection Functions in All Modes (8) [Enter] Join the session. (P232) Finding Sessions You can find sessions from the session selection menu. 1In the session selection menu, click . 2The search window is displayed. Enter the IP address of a projector in the session to join, and then click to find the projector. Once sessions are found, they are listed.
258 Using the Projector Selection Menu Projector Selection Menu (1) Find projectors Find projectors in another subnet. (P260) (2) Sort Change the sort order of the projector list. (P263) (3) Help View application help. (4) Back to mode selection Return to the mode selection menu. (5) Minimize Minimize the window to the taskbar. To view the window again, click the taskbar icon. (6) Exit Return to the mode selection menu. (1) (2) (3) (4) (5) (6) (8) (7)
259 Using the Projector Selection Menu Networked Multi-Projection Functions in All Modes (7) Projector list Projectors are listed here. The information shown includes the projector names, installation location, and IP address. Available projectors are indicated by white text. Gray text indicates that the projector is not available, whether it is off, in use by other computers, or unavailable for other reasons. Clicking a listed projector will select it for use in the session, and it will be shown in the field at right. Selected projectors are also indicated by gray text. (8) List of projectors used in the session Projectors selected in the list at left are shown here. To use password- protected projectors, you must enter the password in the [PW] field. To remove projectors from this list, click . Available projectors Unavailable projectorsIndicates that the projector is off (Clicking the icon will display the projector’s web screen in the browser. (P181))
Using the Projector Selection Menu 260 ■Finding Projectors To find projectors in other subnets, do the following in the projector selection menu. 1In the projector selection menu, click . 2The search window is displayed. Enter the projector’s IP address, and then click .