Canon Projector WUX450 User Manual

							111
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying Direct 
Power-On
> [System settings] > [Direct power 
on]
You can turn on the projector by 
connecting the power cable without 
pressing the POWER button.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• [Off] is the factory default.
Specifying Silence or 
Operating Tones
> [System settings] > [Beep]
You can select whether a beep 
sounds or not when you operate the 
projector.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• The factory default is [On].
• The beep will not sound if you mute the 
projector sound with the MUTE button on 
the remote control.
HDMIComponentLAN
Digital PCAnalog PCUSB
OffYou need to press the POWER button 
to turn on the projector.
OnYou can turn on the projector by 
connecting the power cable only.
• Before enabling direct power on, be 
sure to set [Auto power-off] to an 
option other than [Disabled]. 
Selecting [Disabled] will prevent you 
from using auto power-off.
• After turning off the projector, wait at 
least 5 minutes before turning it on 
again. It may shorten the lamp life if 
you turn on the projector 
immediately after turning it off.
HDMIComponentLAN
Digital PCAnalog PCUSB
OffDisables the beep.
OnEnables the beep. 
						

							112
Customizing System Operation (System Settings)
Specifying Key Repeat 
Operation
> [System settings] > [Key repeat]
By pressing and holding the button 
on the projector or the remote 
control you can operate Key repeat 
in the same way as when the button 
is pressed repeatedly.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• The factory default is [On].
Locking Projector or 
Remote Buttons
> [System settings] > [Key lock]
You can lock the projector to prevent 
its operation from either the main 
unit or remote control.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• [Off] is the factory default.
HDMIComponentLAN
Digital PCAnalog PCUSB
Off
Key repeat is not enabled.
OnKey repeat is enabled.
HDMIComponentLAN
Digital PCAnalog PCUSB
OffDisables the key lock.
Main unitOperation is not possible 
using the main unit.
Use the remote control.
Remote
(wireless)Disables infrared remote 
control operations (P36).
Use buttons on the main unit.
Alternatively, use the optional 
remote control (RS-RC05), 
connected to the projector via a 
cable.
The key lock function becomes 
effective from the moment the OK 
button is pressed after selecting [Main 
unit] or [Remote (wireless)]. Control via 
the item selected will then be disabled. 
						

							113
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Assigning a Channel 
for Remote Control
> [System settings] > [Remote 
control channel]
When using multiple projectors at 
the same time (maximum 4), you can 
assign a different channel to each 
remote control so that each operates 
independently.
Selecting the Projector Channel
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• The factory default is [Independent] for both 
projector and remote control.
• After changing the channel on the menu, be 
sure to change the channel of the remote 
control too.
• If a cable is connected, it is not necessary 
to perform remote control channel setting.
To Unlock Key Lock Function
Turn off the projector and unplug the 
power plug. Hold down the OK button on 
the main unit and plug in the power cord, 
as you continue to hold down the OK 
button. In a moment, a beep will sound, 
and the controls will be unlocked.
HDMIComponentLAN
Digital PCAnalog PCUSB
Ch1
Ch2
Ch3
Ch4Select the remote control 
channel to use with this 
projector.
IndependentRemote controls set to any 
channel can be used. 
						

							114
Customizing System Operation (System Settings)
Selecting a Channel on the 
Remote control
You can change the channel on the 
remote control as follows.
Reducing Motion 
Blur
> [System settings] > [Motion blur 
reduction]
Motion blur is blurring that occurs 
during video playback. Motion blur 
reduction can make this blurring 
less noticeable. This function is 
available in [Presentation] or 
[Dynamic] image modes (P97).
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• [Off] is the factory default.
• If motion blur reduction generates 
distracting image noise, select [Off].
• Effects of motion blur reduction cannot be 
checked during menu display.
• Especially effective for motion of computer 
graphics and similar high-resolution 
images. Ch1Press and hold the OK 
button and [ ] button at the 
same time for 3 seconds.
Ch2Press and hold the OK 
button and [ ] button at the 
same time for 3 seconds.
Ch3Press and hold the OK 
button and [ ] button at the 
same time for 3 seconds.
Ch4Press and hold the OK 
button and [ ] button at the 
same time for 3 seconds.
IndependentPress and hold the OK 
button and   button at the 
same time for 3 seconds.
HDMIComponentLAN
Digital PCAnalog PCUSB
OffMotion blur reduction is not 
performed.
On
Motion blur reduction is performed. 
						

							115
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying HDMI Input
> [System settings] > [HDMI In]
Set the type of equipment which is 
connected to the HDMI port.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• [Auto] is the factory default.
Selecting a Display 
Language
> [System settings] > [Language]
You can select the language in which 
the menus are displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to 
select the menu language, then press 
the OK button.
HDMIComponentLAN
Digital PCAnalog PCUSB
AutoSelect when AV equipment will 
be connected. Image 
processing, menu displays, 
and other elements are 
adjusted for video equipment.
ComputerSelect when a computer will be 
connected. Image processing, 
menu displays, and other 
elements are adjusted for a 
computer.HDMIComponentLAN
Digital PCAnalog PCUSB
English
German
French
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Tu r k i s h
Polish
Hungarian
Czech
Danish
Arabic
Chinese 
(Simplified)
Chinese 
(Traditional)
Korean
Japanese 
						

							116
Customizing System Operation (System Settings)
When the setting is completed, press 
the OK button to accept your setting 
and then press the MENU button or 
EXIT button.Requiring a Password 
for Operation
> [System settings] > [Other settings] > 
[Password settings]
Disables the projector unless the 
correct password is entered.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• [Off] is the factory default.
• You cannot set [On] unless you have 
completed [Register password].
Once you set a password, the 
password entry screen appears at 
power-on.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] / 
[ ] / [ ] buttons.
If the password is valid, the projection 
starts. If you enter a wrong password 
three times, the power will be turned off.
• The power is also turned off if no password 
is input for 3 minutes.
HDMIComponentLAN
Digital PCAnalog PCUSB
OffThe projector can be used even if no 
password is entered.
OnThe projector cannot be used unless 
you enter your password. 
						

							117
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Setting a Password
> [System settings] > [Other settings] >
[Register password]
You can register a password for 
starting projection.
Press the OK button after selecting 
[Register password], and the following 
screen for registering a password 
appears.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] / 
[ ] / [ ] buttons.
The 4-digit password is entered from 
the left to right digits. When the final 
digit is entered, the password is 
automatically registered.
Press the MENU button to abort the 
registration.
To Cancel the Password
Turn off the projector and unplug the 
power plug.
Hold down the MENU button on the side 
control and connect the power plug. 
Make sure to keep holding down the 
MENU button until a beep sounds. When 
the beep sounds, the password is 
canceled. (The entered password is also 
reset.)
To forcibly cancel the password from the 
remote control, in standby state press the 
MENU button 3 times, then press the 
POWER button.
HDMIComponentLAN
Digital PCAnalog PCUSB 
						

							118
Customizing System Operation (System Settings)
Restoring Original 
Gamma Settings
> [System settings] > [Other settings] >
[Gamma restore]
This function is used when changing 
and turning of the tone 
characteristics and achromatic color 
is noticed over a long period of time.
Gamma restore can only be used 
when the lamp has been on for 
approximately 30 minutes or longer.
• If Gamma restore is performed, the 
projected image will be adjusted for a 
period of approximately 150 seconds.
• To stop Gamma restore, press the POWER 
button or the EXIT button.
HDMIComponentLAN
Digital PCAnalog PCUSB
OffReturns to the factory default without 
performing Gamma restore.
AdjustPerforms Gamma restore and applies 
the result.
OKGamma restore is performed.
CancelGamma restore is not 
performed.
If Gamma restore is performed, the 
tone characteristics and achromatic 
color will be restored as close as 
possible to the condition when the 
projector was purchased, however it is 
not possible to restore it completely to 
the original condition. So the changing 
and turning color cannot be eliminated 
completely. 
						

							119
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Resetting the Lamp 
Counter
> [System settings] > [Other settings] >
[Lamp counter]
You can reset the lamp counter that 
indicates the time for lamp 
replacement.
Select [Lamp counter] and press the 
OK button to display the lamp counter.
Select [Reset] and press the OK button.
Select [Yes] on the screen for 
confirmation and press the OK button 
to reset the lamp counter.
Press the MENU button or EXIT button.
■About the Display of the 
Lamp Counter
The lamp counter display is as follows.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours
Displayed as a green and yellow bar.
When the lamp hours are 2,700 hours 
to less than 3,000 hours, the message 
“Obtain a new lamp.” appears when 
power is turned on.
Over 3,000 hours
Displayed as a green, yellow and red 
bar.
The message “Replace with the new 
lamp.” appears when power is turned 
on.
HDMIComponentLAN
Digital PCAnalog PCUSB
Do not reset the lamp counter 
except when you have replaced 
the lamp. Otherwise, the lamp 
counter cannot indicate the 
correct timing for replacing the 
lamp.
For details of lamp replacement, 
refer to page 201. 
						

							120
Customizing System Operation (System Settings)
Resetting the Air Filter 
Counter
> [System settings] > [Other settings] > 
[Air filter counter]
This resets the counter which 
reminds you of the time for cleaning 
and replacing the air filter.
To view the air filter counter, press the 
OK button when [Air filter counter] is 
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select 
[Yes] on the confirmation screen and 
press the OK button.
Press the MENU button or EXIT button.
• The lamp counter provides an 
estimate of the time remaining until 
the lamp must be replaced. This 
value is based on the hours in use 
and the present load on the lamp.
• The number of hours indicated is 
equivalent to use under these 
conditions: [Vertical projection] 
(P152) set to [Off], and [Lamp mode] 
(P107) set to [Full power].
HDMIComponentLAN
Digital PCAnalog PCUSB
For details about how to replace or 
clean the filter, refer to page 199.