Canon Projector WUX450 User Manual

							221
Table of Contents
Safety Instructions
Before Use
Operation
Projecting an Image
Useful Functions Available 
During a Presentation
Setting Functions from 
Menus
Installation and Maintenance
Installation
Connecting to a Network
Maintenance
Networked Multi-Projection
Networked Multi-Projection 
Overview
Operation in Each Mode
Functions in All Modes
AppendixOther Information
Index
Operation in Each 
Mode 
						

							222
Using the Projector in Direct Mode
In this mode, one computer is connected to one projector over the network.
Procedure
1In the mode selection menu, select [Direct Mode].
2The Direct Mode window is displayed. Click  .
To connect to projectors in another subnet, enter the projector’s IP address in the [PJ IP 
address] field and click  . 
						

							223
Using the Projector in Direct Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. Click the projector to connect 
to.
4The Direct Mode window is displayed again. Click [Start projecting].
The computer screen is now projected.
For details on the projector selection menu, refer to “Using the Projector Selection Menu” 
(P258).
• If the [NMPJ Password] setting has been configured on the projector’s settings screen 
(P186), the password is now requested. Enter the password.
• To stop projection, click [Stop projecting].
• A BUSY icon ( ) indicates that the projector is not available, whether it is off, in use 
by other computers, or unavailable for other reasons. The BUSY icon ( ) is not 
updated automatically. To view updated projector status, select or search for projectors 
again. 
						

							Using the Projector in Direct Mode
224
Direct Mode Window
(1) Help
View application help.
(2) Back to mode selection
Return to the mode selection menu.
(3) Compact display
View the window at a compact size. (P274)
(4) Minimize
Minimize the window to the taskbar. To view the window again, click the 
taskbar icon.
(5) Exit
Return to the mode selection menu.
(6) Projector list
View a list of projectors.
(1) (2) (3) (4) (5)
(6)
(7)
(8)
(9)
(10)
(12) (11)
(13) (14) (15) 
						

							225
Using the Projector in Direct Mode
Networked Multi-Projection
Operation in Each Mode
(7) IP address
To connect to projectors in another subnet, enter the projector’s IP address 
here and click (8).
(8) Find projectors
Find the projector with the IP address entered in (7). Results of projector 
searching are shown in (9).
(9) Projector information
Indicates the name, installation location, and IP address of the projector 
selected in the list or found after searching by IP address.
(10) Password
Passwords for projectors on which [NMPJ Password] on the projector’s 
settings screen has been configured (P186) must be entered here before 
projection.
(11) Start
Start projection by the selected projector. During projection, this button is 
labeled [Stop projecting] and can be clicked to stop projection.
(12) Switch primary/secondary monitor
A number is shown here only when secondary monitor connectivity is activated 
on the computer. Clicking the number will switch between the primary and 
secondary monitor.
(13) Blank the projector
Pause projection. Click again to resume projection.
(14) Settings
Display the settings window. (P272)
(15) Projection status
Indicates the projection status. 
						

							226
Using the Projector in Meeting Mode
In meeting mode, multiple computers are connected to multiple projectors. This 
mode is intended for group meetings where multiple computers are used. Up to ten 
computers and six projectors can be connected.
Creating a Session
1In the mode selection menu, select [Meeting Mode].
2The session selection menu is displayed. Click [New]. 
						

							227
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. In the list of projectors at left, 
click the projector to connect to.
You can select up to 6 projectors. Selected projectors are listed at right.
4Click [Next].
• If the [NMPJ Password] setting has been configured on the projector’s settings screen 
(P186), the password is now requested. Enter the password.
• To clear a selected projector, click   in the upper right of that projector listing.
• For details on the projector selection menu, refer to “Using the Projector Selection 
Menu” (P258). 
						

							Using the Projector in Meeting Mode
228
5A window for creating the session is displayed. Specify a session name, 
password, nickname, and desktop (primary or secondary monitor for 
projection), and then click [OK].
6The Meeting Mode window is displayed. Select a projector to control from 
the pull-down list.
• If you choose to set a session password, other users must enter that password to join 
the session. To set a password, click [Set] and enter the password.
• Desktop selection is only available with computers that have dual monitor support. 
						

							229
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
7In the list at right, select a computer to use with your designated 
projector. Drag the computer to a desired position in the layout area.
You can arrange up to four computers as desired in the layout area.
8Drag the computers for use in projection in the layout area to rearrange 
them, as needed.
During projection, screens of each computer will be arranged according to their 
position in the layout area. 
						

							Using the Projector in Meeting Mode
230
9Click [Start projecting].
Images are now projected from the computers in the layout area.
10To end the session, click   or   in the upper right. 
• To stop projection, click [Stop projecting].
• To rearrange the layout during projection, click [Start projecting] again. Note that if you 
simply rearrange the layout, the new layout will not be applied to projection.