Canon Projector WUX450 User Manual

							231
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
11The following confirmation message is displayed. To end the entire 
session, click [Close]. To leave the session, click [Exit].
Return to the mode selection menu.
[Exit] is not shown unless other computers are connected. 
						

							Using the Projector in Meeting Mode
232
Joining a Session
1In the mode selection menu, select [Meeting Mode].
2The session selection menu is displayed. Click [Enter] next to the session 
to join.
To join a session in another subnet, click   and enter the projector’s IP address to 
locate the projector. The application will search for sessions in the other subnet. For 
details, refer to “Using the Session Selection Menu” (P256). 
						

							233
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
3A session login window is displayed. Specify the session password, your 
nickname, and desktop (primary or secondary monitor for display), and 
then click [OK].
4The Meeting Mode window is displayed. Next, follow the instructions 
starting with step 6 in “Creating a Session” (P226).
Desktop selection is only available with computers that have dual monitor support. 
						

							Using the Projector in Meeting Mode
234
Meeting Mode Window
(1) Help
View application help.
(2) Back to mode selection
Return to the mode selection menu.
(3) Compact display
View the window at a compact size. (P274)
(4) Minimize
Minimize the window to the taskbar. To view the window again, click the 
taskbar icon.
(5) Exit
Return to the mode selection menu.
(6) Projector list
View a list of projectors.
(1) (2) (3) (4) (5)
(6)
(7)
(9)
(10)
(14)(15) (8)
(16)
(13) (11)
(12) 
						

							235
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
(7) Projector pull-down list
Lists connected projectors. Your actions on this screen apply to the projector 
selected here.
(8) Computers
Lists connected computers. To prepare computers for projection, drag them to 
the layout area. Your own computer is listed first.
In  , the computer’s display position is indicated by a white square.
(9) Blank the computer
Pause projection from the computer. Click again to resume projection.
(10) Settings
Display the setting window. (P272)
(11) Layout area
Drag computers to this area to assign their projection position.
(12) Computers in layout area
Computers here can be dragged to rearrange them. A number is shown here 
only when secondary monitor connectivity is activated on the computer.
Clicking the number will switch between the primary and secondary monitor.
(13) Blank the projector
Pause projection from the projector. Click again to resume projection.
(14) View information
Project information needed by other users to join the session. The IP address 
projected is used by one of the projectors in the session.
(15) Start/stop projection
Start projection by the selected projector. During projection, this button is 
labeled [Stop projecting] and can be clicked to stop projection.
(16) Acquire screen layout
Indicates the layout of the selected projectors. 
						

							236
Using the Projector in Classroom Mode
In classroom mode, multiple computers are connected to multiple projectors. A 
single presenter can control any computer or projector used for projection, whether 
their own or those of others in attendance. Up to ten computers and six projectors 
can be connected.
Leading a New Session
1In the mode selection menu, select [Classroom Mode].
2The session selection menu is displayed. Click [New]. 
						

							237
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. In the list of projectors at left, 
click the projector to connect to.
You can select up to 6 projectors. Selected projectors are listed at right.
4Click [Next].
• If the [NMPJ Password] setting has been configured on the projector’s settings screen 
(P186), the password is now requested. Enter the password.
• To clear a selected projector, click   in the upper right of the projector listing.
• For details on the projector selection menu, refer to “Using the Projector Selection 
Menu” (P258). 
						

							Using the Projector in Classroom Mode
238
5A window for creating the session is displayed. Specify a session name, 
password, nickname, and desktop (primary or secondary monitor for 
projection), and then click [OK].
6The Classroom Mode window is displayed. Select a projector to control 
from the pull-down list.
• If you choose to set a session password, other users must enter that password to join 
the session. To set a password, click [Set] and enter the password.
• Desktop selection is only available with computers that have dual monitor support. 
						

							239
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
7In the list at right, select a computer to use with your designated 
projector. Drag the computer to a desired position in the layout area.
You can arrange up to four computers as desired in the layout area.
8Drag the computers for use in projection in the layout area to rearrange 
them, as needed.
During projection, screens of each computer will be arranged according to their 
position in the layout area. 
						

							Using the Projector in Classroom Mode
240
9Click [Start projecting].
Images are now projected from the computers in the layout area.
10To end the session, click   or   in the upper right.
• To stop projection, click [Stop projecting].
• To rearrange the layout during projection, click [Start projecting] again. Note that if you 
simply rearrange the layout, the new layout will not be applied to projection.