Canon Projector WUX450 User Manual

							261
Using the Projector Selection Menu
Networked Multi-Projection
Functions in All Modes
3Once the projector is found, click [OK].
The selected projector is now added to the projector list.
■Selecting Password-Protected Projectors
Selecting a password-protected projector will display a password input field. Enter 
the password. 
						

							Using the Projector Selection Menu
262
■Using the Favorites Function
You can register commonly used projectors as favorites.
Favorite projectors are listed first when you click the   button (sort by favorites). 
Up to five projectors can be registered as favorites.
To register a projector as a favorite, click the Favorites icon in the projector 
selection menu.
The projector is now registered as a favorite, and a star is displayed in the 
Favorites column. 
						

							263
Using the Projector Selection Menu
Networked Multi-Projection
Functions in All Modes
■Resorting the Projector List
You can change the sort order of projector information by clicking the sort buttons.
List by projector name.
List by installation location.
List projectors that are currently on first.
List favorite projectors first.
■Turning Projectors On
Projectors currently off are indicated by   in the projector selection menu. 
(These projectors cannot be selected for projection.) You can turn them on by 
clicking   to display the projector web screen and switching the power on.
For instructions after this step, refer to “Control via the Web Screen” (P195).
Once you turn a projector on, you can select it for other operations. 
						

							264
Using Layout Functions
■Switching Projectors Used for the Layout
On the layout window, you can set up the projection layout.
To choose a different projector for the layout, select it from the projector pull-down 
list.
■Controlling all Projectors at Once
To set up the projection layout for all projectors at once, select [ALL] in the projector 
pull-down menu. 
						

							265
Using Layout Functions
Networked Multi-Projection
Functions in All Modes
■Projecting from Multiple Projectors (Multi-Projection)
In Meeting and Classroom Modes, separate images from multiple projectors can be 
projected together. This is called “multi-projection.” On the layout window for 
Meeting or Classroom Modes, you can set up the projection layout for each 
projector used.
1On the layout window for Meeting or Classroom Modes, specify the 
projection layout for each projector.
In the layout area, drag the computer to use in projection, and then click [Start 
projecting] to start projection.
 
2In the pull-down list, select another projector to use. 
3Repeat steps 1 and 2 to set up the computers to use in projection from all 
projectors. 
						

							Using Layout Functions
266
■Switching the Primary/Secondary Monitor
Using the application, you can switch between projection from the primary or 
secondary monitor.
If your computer has dual monitor support, the computer icons are labeled with 
numbers. The primary monitor is labeled “1,” and the secondary one, “2.”
To switch the monitor used for projection, click the icon of computers shown with a 
number.
■Temporarily Enlarge Images
During display from multiple computers, you can enlarge projection from one of the 
computers. To enlarge the display, place the cursor over the computer in the layout 
area, click   in the upper left, and then click [Start projecting]. The image from 
the selected computer is now projected in full-screen mode.
To cancel the enlarged display, place the cursor over the computer in the layout 
area again. Click   in the upper left, and then click [Start projecting]. 
						

							267
Using Layout Functions
Networked Multi-Projection
Functions in All Modes
■Projecting Session Information
You can project session information needed by other users to join a session, such 
as the session name and projector IP address. To project session information, click 
. To cancel display, click   again.
■Fully Blanking Projection
Blanking refers to temporarily stopping projection from computers, so that no image 
is projected. To blank projection, click  . To cancel blanking and return to normal 
projection, click   again.
Direct Mode window 
						

							Using Layout Functions
268
Meeting Mode window
Classroom Mode window (starting a session) 
						

							269
Using Layout Functions
Networked Multi-Projection
Functions in All Modes
■Blanking Projection from Your Computer
In Meeting and Classroom Modes, you can blank projection your computer alone. 
To blank projection from your computer, click   in the computer list. To cancel 
blanking and return to normal projection, click   again.
Broadcast Mode window
Meeting Mode window 
						

							Using Layout Functions
270
■Checking for Computers That Join or Leave Sessions
In Meeting and Classroom Modes, computer users can join or leave sessions as 
needed. Computers joining a session are added to the computers listed on the 
layout window.
Classroom Mode window (joining a session)