Canon Projector WUX450 User Manual
Here you can view all the pages of manual Canon Projector WUX450 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
111
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying Direct
Power-On
> [System settings] > [Direct power
on]
You can turn on the projector by
connecting the power cable without
pressing the POWER button.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying Silence or
Operating Tones
> [System settings] > [Beep]
You can select whether a beep
sounds or not when you operate...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-110.png "Page 111
111
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying Direct
Power-On
> [System settings] > [Direct power
on]
You can turn on the projector by
connecting the power cable without
pressing the POWER button.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying Silence or
Operating Tones
> [System settings] > [Beep]
You can select whether a beep
sounds or not when you operate...")
111 Customizing System Operation (System Settings) Operation Setting Functions from Menus Specifying Direct Power-On > [System settings] > [Direct power on] You can turn on the projector by connecting the power cable without pressing the POWER button. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default. Specifying Silence or Operating Tones > [System settings] > [Beep] You can select whether a beep sounds or not when you operate...
Page 112
![Page 112
112
Customizing System Operation (System Settings)
Specifying Key Repeat
Operation
> [System settings] > [Key repeat]
By pressing and holding the button
on the projector or the remote
control you can operate Key repeat
in the same way as when the button
is pressed repeatedly.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Locking Projector or
Remote Buttons
> [System settings] > [Key lock]
You can lock the projector to...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-111.png "Page 112
112
Customizing System Operation (System Settings)
Specifying Key Repeat
Operation
> [System settings] > [Key repeat]
By pressing and holding the button
on the projector or the remote
control you can operate Key repeat
in the same way as when the button
is pressed repeatedly.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Locking Projector or
Remote Buttons
> [System settings] > [Key lock]
You can lock the projector to...")
112 Customizing System Operation (System Settings) Specifying Key Repeat Operation > [System settings] > [Key repeat] By pressing and holding the button on the projector or the remote control you can operate Key repeat in the same way as when the button is pressed repeatedly. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [On]. Locking Projector or Remote Buttons > [System settings] > [Key lock] You can lock the projector to...
Page 113
![Page 113
113
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Assigning a Channel
for Remote Control
> [System settings] > [Remote
control channel]
When using multiple projectors at
the same time (maximum 4), you can
assign a different channel to each
remote control so that each operates
independently.
Selecting the Projector Channel
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Independent] for both...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-112.png "Page 113
113
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Assigning a Channel
for Remote Control
> [System settings] > [Remote
control channel]
When using multiple projectors at
the same time (maximum 4), you can
assign a different channel to each
remote control so that each operates
independently.
Selecting the Projector Channel
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Independent] for both...")
113 Customizing System Operation (System Settings) Operation Setting Functions from Menus Assigning a Channel for Remote Control > [System settings] > [Remote control channel] When using multiple projectors at the same time (maximum 4), you can assign a different channel to each remote control so that each operates independently. Selecting the Projector Channel Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [Independent] for both...
Page 114
![Page 114
114
Customizing System Operation (System Settings)
Selecting a Channel on the
Remote control
You can change the channel on the
remote control as follows.
Reducing Motion
Blur
> [System settings] > [Motion blur
reduction]
Motion blur is blurring that occurs
during video playback. Motion blur
reduction can make this blurring
less noticeable. This function is
available in [Presentation] or
[Dynamic] image modes (P97).
Press the OK button to accept your
setting and then press the MENU
button or...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-113.png "Page 114
114
Customizing System Operation (System Settings)
Selecting a Channel on the
Remote control
You can change the channel on the
remote control as follows.
Reducing Motion
Blur
> [System settings] > [Motion blur
reduction]
Motion blur is blurring that occurs
during video playback. Motion blur
reduction can make this blurring
less noticeable. This function is
available in [Presentation] or
[Dynamic] image modes (P97).
Press the OK button to accept your
setting and then press the MENU
button or...")
114 Customizing System Operation (System Settings) Selecting a Channel on the Remote control You can change the channel on the remote control as follows. Reducing Motion Blur > [System settings] > [Motion blur reduction] Motion blur is blurring that occurs during video playback. Motion blur reduction can make this blurring less noticeable. This function is available in [Presentation] or [Dynamic] image modes (P97). Press the OK button to accept your setting and then press the MENU button or...
Page 115
![Page 115
115
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying HDMI Input
> [System settings] > [HDMI In]
Set the type of equipment which is
connected to the HDMI port.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Auto] is the factory default.
Selecting a Display
Language
> [System settings] > [Language]
You can select the language in which
the menus are displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to
select...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-114.png "Page 115
115
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying HDMI Input
> [System settings] > [HDMI In]
Set the type of equipment which is
connected to the HDMI port.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Auto] is the factory default.
Selecting a Display
Language
> [System settings] > [Language]
You can select the language in which
the menus are displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to
select...")
115 Customizing System Operation (System Settings) Operation Setting Functions from Menus Specifying HDMI Input > [System settings] > [HDMI In] Set the type of equipment which is connected to the HDMI port. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Auto] is the factory default. Selecting a Display Language > [System settings] > [Language] You can select the language in which the menus are displayed. Use the [ ] / [ ] / [ ] / [ ] buttons to select...
Page 116
![Page 116
116
Customizing System Operation (System Settings)
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.Requiring a Password
for Operation
> [System settings] > [Other settings] >
[Password settings]
Disables the projector unless the
correct password is entered.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• You cannot set [On] unless you have
completed...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-115.png "Page 116
116
Customizing System Operation (System Settings)
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.Requiring a Password
for Operation
> [System settings] > [Other settings] >
[Password settings]
Disables the projector unless the
correct password is entered.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• You cannot set [On] unless you have
completed...")
116 Customizing System Operation (System Settings) When the setting is completed, press the OK button to accept your setting and then press the MENU button or EXIT button.Requiring a Password for Operation > [System settings] > [Other settings] > [Password settings] Disables the projector unless the correct password is entered. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default. • You cannot set [On] unless you have completed...
Page 117
![Page 117
117
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Setting a Password
> [System settings] > [Other settings] >
[Register password]
You can register a password for
starting projection.
Press the OK button after selecting
[Register password], and the following
screen for registering a password
appears.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
The 4-digit password is entered from
the left to right digits. When the...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-116.png "Page 117
117
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Setting a Password
> [System settings] > [Other settings] >
[Register password]
You can register a password for
starting projection.
Press the OK button after selecting
[Register password], and the following
screen for registering a password
appears.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
The 4-digit password is entered from
the left to right digits. When the...")
117 Customizing System Operation (System Settings) Operation Setting Functions from Menus Setting a Password > [System settings] > [Other settings] > [Register password] You can register a password for starting projection. Press the OK button after selecting [Register password], and the following screen for registering a password appears. Enter a 4 digit password. Enter the password using the [ ] / [ ] / [ ] / [ ] buttons. The 4-digit password is entered from the left to right digits. When the...
Page 118
![Page 118
118
Customizing System Operation (System Settings)
Restoring Original
Gamma Settings
> [System settings] > [Other settings] >
[Gamma restore]
This function is used when changing
and turning of the tone
characteristics and achromatic color
is noticed over a long period of time.
Gamma restore can only be used
when the lamp has been on for
approximately 30 minutes or longer.
• If Gamma restore is performed, the
projected image will be adjusted for a
period of approximately 150 seconds.
• To stop...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-117.png "Page 118
118
Customizing System Operation (System Settings)
Restoring Original
Gamma Settings
> [System settings] > [Other settings] >
[Gamma restore]
This function is used when changing
and turning of the tone
characteristics and achromatic color
is noticed over a long period of time.
Gamma restore can only be used
when the lamp has been on for
approximately 30 minutes or longer.
• If Gamma restore is performed, the
projected image will be adjusted for a
period of approximately 150 seconds.
• To stop...")
118 Customizing System Operation (System Settings) Restoring Original Gamma Settings > [System settings] > [Other settings] > [Gamma restore] This function is used when changing and turning of the tone characteristics and achromatic color is noticed over a long period of time. Gamma restore can only be used when the lamp has been on for approximately 30 minutes or longer. • If Gamma restore is performed, the projected image will be adjusted for a period of approximately 150 seconds. • To stop...
Page 119
![Page 119
119
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Resetting the Lamp
Counter
> [System settings] > [Other settings] >
[Lamp counter]
You can reset the lamp counter that
indicates the time for lamp
replacement.
Select [Lamp counter] and press the
OK button to display the lamp counter.
Select [Reset] and press the OK button.
Select [Yes] on the screen for
confirmation and press the OK button
to reset the lamp counter.
Press the MENU button or EXIT button....](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-118.png "Page 119
119
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Resetting the Lamp
Counter
> [System settings] > [Other settings] >
[Lamp counter]
You can reset the lamp counter that
indicates the time for lamp
replacement.
Select [Lamp counter] and press the
OK button to display the lamp counter.
Select [Reset] and press the OK button.
Select [Yes] on the screen for
confirmation and press the OK button
to reset the lamp counter.
Press the MENU button or EXIT button....")
119 Customizing System Operation (System Settings) Operation Setting Functions from Menus Resetting the Lamp Counter > [System settings] > [Other settings] > [Lamp counter] You can reset the lamp counter that indicates the time for lamp replacement. Select [Lamp counter] and press the OK button to display the lamp counter. Select [Reset] and press the OK button. Select [Yes] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button or EXIT button....
Page 120
![Page 120
120
Customizing System Operation (System Settings)
Resetting the Air Filter
Counter
> [System settings] > [Other settings] >
[Air filter counter]
This resets the counter which
reminds you of the time for cleaning
and replacing the air filter.
To view the air filter counter, press the
OK button when [Air filter counter] is
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select
[Yes] on the confirmation screen and
press the OK button.
Press the MENU button or EXIT...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-119.png "Page 120
120
Customizing System Operation (System Settings)
Resetting the Air Filter
Counter
> [System settings] > [Other settings] >
[Air filter counter]
This resets the counter which
reminds you of the time for cleaning
and replacing the air filter.
To view the air filter counter, press the
OK button when [Air filter counter] is
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select
[Yes] on the confirmation screen and
press the OK button.
Press the MENU button or EXIT...")
120 Customizing System Operation (System Settings) Resetting the Air Filter Counter > [System settings] > [Other settings] > [Air filter counter] This resets the counter which reminds you of the time for cleaning and replacing the air filter. To view the air filter counter, press the OK button when [Air filter counter] is selected. Select [Reset] and press the OK button. To reset the air filter counter, select [Yes] on the confirmation screen and press the OK button. Press the MENU button or EXIT...