Canon Projector WUX450 User Manual
Here you can view all the pages of manual Canon Projector WUX450 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
Connection Procedure
141
Installation and Maintenance
Installation
■Connecting to Analog Video Output Terminal (Analog
Connection)
Connecting with a component cable (Input signal type: [Component] P53)
Component video signals from AV equipment can be supplied to the projector by
connecting the component cable to the projector’s COMPONENT terminal.
Use a commercially available component cable (not included) that fits the terminal
type of the AV equipment to create a relay connection.
• Use an audio...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-140.png "Page 141
Connection Procedure
141
Installation and Maintenance
Installation
■Connecting to Analog Video Output Terminal (Analog
Connection)
Connecting with a component cable (Input signal type: [Component] P53)
Component video signals from AV equipment can be supplied to the projector by
connecting the component cable to the projector’s COMPONENT terminal.
Use a commercially available component cable (not included) that fits the terminal
type of the AV equipment to create a relay connection.
• Use an audio...")
Connection Procedure 141 Installation and Maintenance Installation ■Connecting to Analog Video Output Terminal (Analog Connection) Connecting with a component cable (Input signal type: [Component] P53) Component video signals from AV equipment can be supplied to the projector by connecting the component cable to the projector’s COMPONENT terminal. Use a commercially available component cable (not included) that fits the terminal type of the AV equipment to create a relay connection. • Use an audio...
Page 142
Connection Procedure 142 ■Outputting Audio to Speakers It is possible to output audio from the projected images to AV equipment or amplified speakers. Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will reduce the audio volume. To AUDIO OUT terminal Audio cable (not included)RCA terminal Mini jack AUDIO IN terminal (AUDIO IN) Projector Speaker
Page 143
Connection Procedure 143 Installation and Maintenance Installation Plugging the Projector In Connect the power cord to the projector and plug it in. Connect the ground terminal on the power plug to ground. Not doing so could result in an electric shock. Additionally, it may cause computers to be affected by electromagnetic interference and impair TV and radio reception. • Fully insert the power cord plug into the socket. • After turning off the projector, wait at least 5 minutes before turning it on...
Page 144
![Page 144
144
Starting Projection
Starting and Stopping Projection
■Starting Projection
Press the POWER button on the remote control or on the projector.
The [POWER ON] indicator initially flashes green, after which it remains lit.
■Stopping Projection
Press the POWER button on the remote control or on the projector twice.
■When the Language Selection Screen Appears
A screen appears when the projector is turned on for the first time. You can select a
language to be used by the projector for displaying menus and...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-143.png "Page 144
144
Starting Projection
Starting and Stopping Projection
■Starting Projection
Press the POWER button on the remote control or on the projector.
The [POWER ON] indicator initially flashes green, after which it remains lit.
■Stopping Projection
Press the POWER button on the remote control or on the projector twice.
■When the Language Selection Screen Appears
A screen appears when the projector is turned on for the first time. You can select a
language to be used by the projector for displaying menus and...")
144 Starting Projection Starting and Stopping Projection ■Starting Projection Press the POWER button on the remote control or on the projector. The [POWER ON] indicator initially flashes green, after which it remains lit. ■Stopping Projection Press the POWER button on the remote control or on the projector twice. ■When the Language Selection Screen Appears A screen appears when the projector is turned on for the first time. You can select a language to be used by the projector for displaying menus and...
Page 145
Starting Projection 145 Installation and Maintenance Installation ■When “No signal” Appears With a notebook computer, the user must turn on the external monitor output. (P145) Press the INPUT button to select the input signal. (P54) ■When Notebook Computer Screen Does Not Appear Set your notebook computer to output signals to an external monitor. For more details, refer to “Changing Notebook Computer Screen Output” below. ■Adjusting Image •Set the display resolution of the computer to the highest...
Page 146
![Page 146
146
Installation-Related Menu Settings
Locking Installation
Settings
> [Install settings] > [Positional lock]
Operation of installation related
functions can be prohibited.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Off].
• Locking applies to the following settings:
screen aspect, keystone adjustment, digital
image shift, horizontal/vertical image flip,
and professional settings.
Flipping Image
Display
> [Install settings] >...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-145.png "Page 146
146
Installation-Related Menu Settings
Locking Installation
Settings
> [Install settings] > [Positional lock]
Operation of installation related
functions can be prohibited.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Off].
• Locking applies to the following settings:
screen aspect, keystone adjustment, digital
image shift, horizontal/vertical image flip,
and professional settings.
Flipping Image
Display
> [Install settings] >...")
146 Installation-Related Menu Settings Locking Installation Settings > [Install settings] > [Positional lock] Operation of installation related functions can be prohibited. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [Off]. • Locking applies to the following settings: screen aspect, keystone adjustment, digital image shift, horizontal/vertical image flip, and professional settings. Flipping Image Display > [Install settings] >...
Page 147
Installation-Related Menu Settings 147 Installation and Maintenance Installation • To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • If you flip the image, the keystone distortion adjustment will be reset. Normal (None) Ceiling Mounting Rear projection Rear, Ceiling Mounting
Page 148
![Page 148
Installation-Related Menu Settings
148
Specifying the Screen
Aspect
> [Install settings] > [Screen aspect]
Select according to the aspect ratio
of the projection screen. (P60)Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [16:10] is the factory default.
• Changing the screen aspect will reset any
keystone or digital image shift setting.
• [Auto] may be automatically selected for the
aspect depending on the screen aspect
setting.
HDMIComponentLAN
Digital...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-147.png "Page 148
Installation-Related Menu Settings
148
Specifying the Screen
Aspect
> [Install settings] > [Screen aspect]
Select according to the aspect ratio
of the projection screen. (P60)Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [16:10] is the factory default.
• Changing the screen aspect will reset any
keystone or digital image shift setting.
• [Auto] may be automatically selected for the
aspect depending on the screen aspect
setting.
HDMIComponentLAN
Digital...")
Installation-Related Menu Settings 148 Specifying the Screen Aspect > [Install settings] > [Screen aspect] Select according to the aspect ratio of the projection screen. (P60)Press the OK button to accept your setting and then press the MENU button or EXIT button. • [16:10] is the factory default. • Changing the screen aspect will reset any keystone or digital image shift setting. • [Auto] may be automatically selected for the aspect depending on the screen aspect setting. HDMIComponentLAN Digital...
Page 149
![Page 149
Installation-Related Menu Settings
149
Installation and Maintenance
Installation
Adjusting the Size of
Projected Images
(WUX400ST/WX450ST)
> [Install settings] > [Zoom]
Projected images that do not fit on
the screen can be projected at a
digitally reduced size.
Press the [ ] button on the remote
control to project images at a reduced
size, and press the [ ] button to
enlarge images to full size. Images can
be projected at 75-100% of the original
size.
• The factory default is 100%....](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-148.png "Page 149
Installation-Related Menu Settings
149
Installation and Maintenance
Installation
Adjusting the Size of
Projected Images
(WUX400ST/WX450ST)
> [Install settings] > [Zoom]
Projected images that do not fit on
the screen can be projected at a
digitally reduced size.
Press the [ ] button on the remote
control to project images at a reduced
size, and press the [ ] button to
enlarge images to full size. Images can
be projected at 75-100% of the original
size.
• The factory default is 100%....")
Installation-Related Menu Settings 149 Installation and Maintenance Installation Adjusting the Size of Projected Images (WUX400ST/WX450ST) > [Install settings] > [Zoom] Projected images that do not fit on the screen can be projected at a digitally reduced size. Press the [ ] button on the remote control to project images at a reduced size, and press the [ ] button to enlarge images to full size. Images can be projected at 75-100% of the original size. • The factory default is 100%....
Page 150
![Page 150
Installation-Related Menu Settings
150
Specifying Keystone
Correction
> [Install settings] > [Keystone]
Two types of keystone correction are
available: horizontal-vertical
keystone and corner adjustment.
Keystone correction can also be
reset. Keystone correction can be
applied by pressing the KEYSTONE
button. (P68)
Pressing the KEYSTONE button when
the screen aspect is [16:9 D. image
shift] or [4:3 D. image shift] will not
apply keystone correction.
Specifying Digital
Image Shift
> [Install...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-149.png "Page 150
Installation-Related Menu Settings
150
Specifying Keystone
Correction
> [Install settings] > [Keystone]
Two types of keystone correction are
available: horizontal-vertical
keystone and corner adjustment.
Keystone correction can also be
reset. Keystone correction can be
applied by pressing the KEYSTONE
button. (P68)
Pressing the KEYSTONE button when
the screen aspect is [16:9 D. image
shift] or [4:3 D. image shift] will not
apply keystone correction.
Specifying Digital
Image Shift
> [Install...")
Installation-Related Menu Settings 150 Specifying Keystone Correction > [Install settings] > [Keystone] Two types of keystone correction are available: horizontal-vertical keystone and corner adjustment. Keystone correction can also be reset. Keystone correction can be applied by pressing the KEYSTONE button. (P68) Pressing the KEYSTONE button when the screen aspect is [16:9 D. image shift] or [4:3 D. image shift] will not apply keystone correction. Specifying Digital Image Shift > [Install...