Canon Projector WUX450 User Manual
Here you can view all the pages of manual Canon Projector WUX450 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
101
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Adjusting Colors
> [Image adjustment] > [Color
adjustment]
You can adjust the color depth and
hue of images for each primary
color, red, green and blue. The color
temperature can also be adjusted.When you have completed the
adjustment, press the MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.HDMIComponentLAN...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-100.png "Page 101
101
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Adjusting Colors
> [Image adjustment] > [Color
adjustment]
You can adjust the color depth and
hue of images for each primary
color, red, green and blue. The color
temperature can also be adjusted.When you have completed the
adjustment, press the MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.HDMIComponentLAN...")
101 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Adjusting Colors > [Image adjustment] > [Color adjustment] You can adjust the color depth and hue of images for each primary color, red, green and blue. The color temperature can also be adjusted.When you have completed the adjustment, press the MENU or EXIT button. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection.HDMIComponentLAN...
Page 102
![Page 102
102
Adjusting Image Quality (Image Adjustment)
Adjusting to the
Ambient Light
(Ambient Light)
> [Image adjustment] > [Advanced
adjustment] >
[Ambient light]
You can correct and more effectively
project an image according to the
ambient light on the screen.
The [Ambient light] setting is
available in Photo/sRGB image
mode (P97).Examples of Ambient Light Level
Settings
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default....](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-101.png "Page 102
102
Adjusting Image Quality (Image Adjustment)
Adjusting to the
Ambient Light
(Ambient Light)
> [Image adjustment] > [Advanced
adjustment] >
[Ambient light]
You can correct and more effectively
project an image according to the
ambient light on the screen.
The [Ambient light] setting is
available in Photo/sRGB image
mode (P97).Examples of Ambient Light Level
Settings
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default....")
102 Adjusting Image Quality (Image Adjustment) Adjusting to the Ambient Light (Ambient Light) > [Image adjustment] > [Advanced adjustment] > [Ambient light] You can correct and more effectively project an image according to the ambient light on the screen. The [Ambient light] setting is available in Photo/sRGB image mode (P97).Examples of Ambient Light Level Settings Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default....
Page 103
![Page 103
103
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Reducing Image
Noise
(Noise reduction)
> [Image adjustment] > [Advanced
adjustment] >
[Noise reduction]
You can reduce image noise.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default for HDMI (when [HDMI
In] (P115) is set to [Auto]) is [Off] and when
Component is used, it is set to [Weak].
• Image resolution may seem lower when
noise reduction is...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-102.png "Page 103
103
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Reducing Image
Noise
(Noise reduction)
> [Image adjustment] > [Advanced
adjustment] >
[Noise reduction]
You can reduce image noise.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default for HDMI (when [HDMI
In] (P115) is set to [Auto]) is [Off] and when
Component is used, it is set to [Weak].
• Image resolution may seem lower when
noise reduction is...")
103 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Reducing Image Noise (Noise reduction) > [Image adjustment] > [Advanced adjustment] > [Noise reduction] You can reduce image noise. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default for HDMI (when [HDMI In] (P115) is set to [Auto]) is [Off] and when Component is used, it is set to [Weak]. • Image resolution may seem lower when noise reduction is...
Page 104
![Page 104
104
Adjusting Image Quality (Image Adjustment)
Correcting Memory
Color
> [Image adjustment] > [Advanced
adjustment] >
[Mem. color correct]
Enhances skin tones, blue skies, and
greens, so that these colors are
more consistent with people’s
remembered impressions.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default settings are as follows.
-For HDMI (when [HDMI In] (P115) is set
to [Computer]), Digital PC, Analog PC,
USB, or LAN, the...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-103.png "Page 104
104
Adjusting Image Quality (Image Adjustment)
Correcting Memory
Color
> [Image adjustment] > [Advanced
adjustment] >
[Mem. color correct]
Enhances skin tones, blue skies, and
greens, so that these colors are
more consistent with people’s
remembered impressions.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default settings are as follows.
-For HDMI (when [HDMI In] (P115) is set
to [Computer]), Digital PC, Analog PC,
USB, or LAN, the...")
104 Adjusting Image Quality (Image Adjustment) Correcting Memory Color > [Image adjustment] > [Advanced adjustment] > [Mem. color correct] Enhances skin tones, blue skies, and greens, so that these colors are more consistent with people’s remembered impressions. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default settings are as follows. -For HDMI (when [HDMI In] (P115) is set to [Computer]), Digital PC, Analog PC, USB, or LAN, the...
Page 105
![Page 105
105
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
• [Off] is the factory default.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
• Adjustment is not shown on the projected
menu screen itself.Fine-Tuning Gamma
> [Image adjustment] > [Advanced
adjustment] >
[Fine-Tune Gamma]
The four gamma curves (white, red,
green, blue) can be adjusted.
Red,
green, and blue can be adjusted...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-104.png "Page 105
105
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
• [Off] is the factory default.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
• Adjustment is not shown on the projected
menu screen itself.Fine-Tuning Gamma
> [Image adjustment] > [Advanced
adjustment] >
[Fine-Tune Gamma]
The four gamma curves (white, red,
green, blue) can be adjusted.
Red,
green, and blue can be adjusted...")
105 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus • [Off] is the factory default. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. • Adjustment is not shown on the projected menu screen itself.Fine-Tuning Gamma > [Image adjustment] > [Advanced adjustment] > [Fine-Tune Gamma] The four gamma curves (white, red, green, blue) can be adjusted. Red, green, and blue can be adjusted...
Page 106
106 Adjusting Image Quality (Image Adjustment) • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. • For details of gamma correction, refer to page 100. • RGB offset (relative to 0) can be adjusted by using the R/G/B Offset function (“Adjusting Colors” (P101)). • Adjustment is not applied to the projected menu itself. Perform adjustment using input signals or a built-in test pattern.Controlling Contrast (Iris) > [Image...
Page 107
![Page 107
107
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Specifying the Lamp
Mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-106.png "Page 107
107
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Specifying the Lamp
Mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values...")
107 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Specifying the Lamp Mode > [Image adjustment] > [Lamp mode] Reducing the lamp brightness reduces power consumption and cooling fan noise. You can access the [Lamp mode] menu by pressing the ECO button on the remote control. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [Full power]. • The adjustment you have made is stored as adjusted values...
Page 108
![Page 108
108
Customizing System Operation (System Settings)
Registering User Logos
> [System settings] > [User screen
settings] >
[Logo capture]
Registers the current image as a
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Positioning User
Logos
> [System settings] > [User screen
settings] >
[Logo position]
Specify the position...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-107.png "Page 108
108
Customizing System Operation (System Settings)
Registering User Logos
> [System settings] > [User screen
settings] >
[Logo capture]
Registers the current image as a
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Positioning User
Logos
> [System settings] > [User screen
settings] >
[Logo position]
Specify the position...")
108 Customizing System Operation (System Settings) Registering User Logos > [System settings] > [User screen settings] > [Logo capture] Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the startup image. Press the OK button to accept your setting and then press the MENU button or EXIT button. Positioning User Logos > [System settings] > [User screen settings] > [Logo position] Specify the position...
Page 109
![Page 109
109
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
No Signal Screen
> [System settings] > [User screen
settings] >
[No signal screen]
As the image projected when there is
no input signal, you can choose a
black, blue, or registered user
screen.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Blue] is the factory default.
Screen When Blank
> [System settings] > [User screen
settings] >
[Screen when blank]
You can...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-108.png "Page 109
109
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
No Signal Screen
> [System settings] > [User screen
settings] >
[No signal screen]
As the image projected when there is
no input signal, you can choose a
black, blue, or registered user
screen.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Blue] is the factory default.
Screen When Blank
> [System settings] > [User screen
settings] >
[Screen when blank]
You can...")
109 Customizing System Operation (System Settings) Operation Setting Functions from Menus No Signal Screen > [System settings] > [User screen settings] > [No signal screen] As the image projected when there is no input signal, you can choose a black, blue, or registered user screen. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Blue] is the factory default. Screen When Blank > [System settings] > [User screen settings] > [Screen when blank] You can...
Page 110
![Page 110
110
Customizing System Operation (System Settings)
Selecting a Logo at
Startup
> [System settings] > [User screen
settings] >
[Projector on]
You can display a specified logo on
the screen from the moment the
projector is turned on to the moment
it is ready for projection.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Canon logo] is the factory default.
• Only images with an aspect of 16:10 can be
registered as user logos.
Specifying Auto
Power-Off...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-109.png "Page 110
110
Customizing System Operation (System Settings)
Selecting a Logo at
Startup
> [System settings] > [User screen
settings] >
[Projector on]
You can display a specified logo on
the screen from the moment the
projector is turned on to the moment
it is ready for projection.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Canon logo] is the factory default.
• Only images with an aspect of 16:10 can be
registered as user logos.
Specifying Auto
Power-Off...")
110 Customizing System Operation (System Settings) Selecting a Logo at Startup > [System settings] > [User screen settings] > [Projector on] You can display a specified logo on the screen from the moment the projector is turned on to the moment it is ready for projection. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Canon logo] is the factory default. • Only images with an aspect of 16:10 can be registered as user logos. Specifying Auto Power-Off...