Canon Projector WUX450 User Manual
Here you can view all the pages of manual Canon Projector WUX450 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
51 Table of Contents Safety Instructions Before Use Operation Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation and Maintenance Installation Connecting to a Network Maintenance Networked Multi-Projection Networked Multi-Projection Overview Operation in Each Mode Functions in All Modes AppendixOther Information Index Projecting an Image
Page 52
![Page 52
52
Step 1 Turn the Projector On
1Check the connection between the projector and the computer or AV
equipment. (P137 - P140)
For instructions on connecting the power cord, refer to “Plugging the Projector
In” (P143).
2Press the POWER button.
The [POWER ON] indicator initially flashes green, after which it remains lit.
The countdown window is displayed for approximately 20 seconds, and then
the projection is started. Press the OK or EXIT button to make the countdown
window disappear.
3Turn on the...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-51.png "Page 52
52
Step 1 Turn the Projector On
1Check the connection between the projector and the computer or AV
equipment. (P137 - P140)
For instructions on connecting the power cord, refer to “Plugging the Projector
In” (P143).
2Press the POWER button.
The [POWER ON] indicator initially flashes green, after which it remains lit.
The countdown window is displayed for approximately 20 seconds, and then
the projection is started. Press the OK or EXIT button to make the countdown
window disappear.
3Turn on the...")
52 Step 1 Turn the Projector On 1Check the connection between the projector and the computer or AV equipment. (P137 - P140) For instructions on connecting the power cord, refer to “Plugging the Projector In” (P143). 2Press the POWER button. The [POWER ON] indicator initially flashes green, after which it remains lit. The countdown window is displayed for approximately 20 seconds, and then the projection is started. Press the OK or EXIT button to make the countdown window disappear. 3Turn on the...
Page 53
![Page 53
53
Operation
Projecting an Image
Step 2 Select an Input Signal
Select the input signal in the [Input] menu when you want to project a digital PC or
AV equipment signal, or to switch between inputs when multiple computers or
multiple sets of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
Types of Input Signals
The table below shows the relationship among input signals supported by the
projector, input terminals and connection cables.
Input...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-52.png "Page 53
53
Operation
Projecting an Image
Step 2 Select an Input Signal
Select the input signal in the [Input] menu when you want to project a digital PC or
AV equipment signal, or to switch between inputs when multiple computers or
multiple sets of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
Types of Input Signals
The table below shows the relationship among input signals supported by the
projector, input terminals and connection cables.
Input...")
53 Operation Projecting an Image Step 2 Select an Input Signal Select the input signal in the [Input] menu when you want to project a digital PC or AV equipment signal, or to switch between inputs when multiple computers or multiple sets of AV equipment are connected. Skip this step if you have not changed the input signal since the last projection. Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables. Input...
Page 54
![Page 54
Step 2 Select an Input Signal
54
Selecting an Input Signal
1Press the INPUT button to display the window shown below.
The currently active input signal is marked with a green circle and enclosed by
a orange border.
An input signal that is ready for projection is displayed in white. When no signal
is received, it is displayed in gray. However, [Digital PC] or [Analog PC-1] may
be displayed in gray even if these signals are ready for projection.
2You can switch the available input signal types by...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-53.png "Page 54
Step 2 Select an Input Signal
54
Selecting an Input Signal
1Press the INPUT button to display the window shown below.
The currently active input signal is marked with a green circle and enclosed by
a orange border.
An input signal that is ready for projection is displayed in white. When no signal
is received, it is displayed in gray. However, [Digital PC] or [Analog PC-1] may
be displayed in gray even if these signals are ready for projection.
2You can switch the available input signal types by...")
Step 2 Select an Input Signal 54 Selecting an Input Signal 1Press the INPUT button to display the window shown below. The currently active input signal is marked with a green circle and enclosed by a orange border. An input signal that is ready for projection is displayed in white. When no signal is received, it is displayed in gray. However, [Digital PC] or [Analog PC-1] may be displayed in gray even if these signals are ready for projection. 2You can switch the available input signal types by...
Page 55
![Page 55
55
Operation
Projecting an Image
Step 3 Adjust the Image
Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the
computer to the resolution closest to the output signal resolution of the projector.
(P292)
Maximum resolution
WUX450/WUX400ST: 1920 X 1200 dots
WX520/WX450ST: 1440 X 900 dots
■Windows 8
1Move the cursor toward the upper or lower right corner to access the
menu.
2Click [Settings], and then click [Control Panel]....](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-54.png "Page 55
55
Operation
Projecting an Image
Step 3 Adjust the Image
Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the
computer to the resolution closest to the output signal resolution of the projector.
(P292)
Maximum resolution
WUX450/WUX400ST: 1920 X 1200 dots
WX520/WX450ST: 1440 X 900 dots
■Windows 8
1Move the cursor toward the upper or lower right corner to access the
menu.
2Click [Settings], and then click [Control Panel]....")
55 Operation Projecting an Image Step 3 Adjust the Image Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the display resolution of the computer to the resolution closest to the output signal resolution of the projector. (P292) Maximum resolution WUX450/WUX400ST: 1920 X 1200 dots WX520/WX450ST: 1440 X 900 dots ■Windows 8 1Move the cursor toward the upper or lower right corner to access the menu. 2Click [Settings], and then click [Control Panel]....
Page 56
![Page 56
Step 3 Adjust the Image
56
■Mac OS X
1Open the Apple Menu and select
[System Preferences].
2In the [System Preferences] window,
click the [Displays] icon to display the
Display window.
3Select the [Display] tab and select the
resolution closest to the maximum
output signal resolution of the projector
from the [Resolutions] list.
4Close the [System Preferences] window.
■Windows Vista
1Open the [Control Panel] from
the start menu, then select
[Appearance and
Personalization] - [Adjust screen...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-55.png "Page 56
Step 3 Adjust the Image
56
■Mac OS X
1Open the Apple Menu and select
[System Preferences].
2In the [System Preferences] window,
click the [Displays] icon to display the
Display window.
3Select the [Display] tab and select the
resolution closest to the maximum
output signal resolution of the projector
from the [Resolutions] list.
4Close the [System Preferences] window.
■Windows Vista
1Open the [Control Panel] from
the start menu, then select
[Appearance and
Personalization] - [Adjust screen...")
Step 3 Adjust the Image 56 ■Mac OS X 1Open the Apple Menu and select [System Preferences]. 2In the [System Preferences] window, click the [Displays] icon to display the Display window. 3Select the [Display] tab and select the resolution closest to the maximum output signal resolution of the projector from the [Resolutions] list. 4Close the [System Preferences] window. ■Windows Vista 1Open the [Control Panel] from the start menu, then select [Appearance and Personalization] - [Adjust screen...
Page 57
![Page 57
57
Step 3 Adjust the Image
Operation
Projecting an Image
Auto PC Adjustment
If the image display is shifted or there is flickering of the screen when [Analog PC-1]
or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to
the optimal condition.
The adjustment results will be stored. If the projector is used again with the same
computer, when the input signal is selected the image will be projected
automatically under the same conditions that were previously adjusted....](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-56.png "Page 57
57
Step 3 Adjust the Image
Operation
Projecting an Image
Auto PC Adjustment
If the image display is shifted or there is flickering of the screen when [Analog PC-1]
or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to
the optimal condition.
The adjustment results will be stored. If the projector is used again with the same
computer, when the input signal is selected the image will be projected
automatically under the same conditions that were previously adjusted....")
57 Step 3 Adjust the Image Operation Projecting an Image Auto PC Adjustment If the image display is shifted or there is flickering of the screen when [Analog PC-1] or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to the optimal condition. The adjustment results will be stored. If the projector is used again with the same computer, when the input signal is selected the image will be projected automatically under the same conditions that were previously adjusted....
Page 58
Step 3 Adjust the Image 58 Adjusting the Image Position Turn the lens shift dials to adjust the projected image vertically or horizontally. Called “lens shift,” this adjusts the projected image into position by moving the lens up, down, left, or right. ■WUX450/WX520 ■WUX400ST/WX450ST • Instead of adjusting where the image is projected, you can also move the image itself. For details, refer to “Specifying Digital Image Shift” (P150). • You can fine-tune the image position by turning the upper part of...
Page 59
59 Step 3 Adjust the Image Operation Projecting an Image Adjusting the Focus To adjust the focus, turn the focus ring. On the WUX400ST/WX450ST, images will waver as you turn the focus ring. Hold the focus ring on top and bottom and turn it slowly as you adjust the focus. Focus ring Focus adjustment WUX450/WX520 WUX400ST/WX450ST Focus adjustment Focus ring
Page 60
60 Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. You may need to change the setting depending on the resolution of the computer or other AV equipment connected. If the image is not projected with the desired aspect ratio, refer to...