Canon Projector WUX450 User Manual

41
Part Names
Before Use
INPUT button (P54)
Switches the input signal.
Pointer buttons (P85)
Selects the upper, lower, left or right item in the menu. Also used 
to assign a channel to the remote control. (P113) MENU button (P84)
Displays a menu on the screen. Also used to assign a channel to 
the remote control. (P113)
VOL button (P77)
Adjusts the sound volume.
[+] button: Increases the volume.
[–] button: Decreases the volume. AUTO PC button (P57)
Adjusts tracking etc. automatically in accordance with...

Part Names
42
Side Control
LED indicators
The projector status is shown by the LED indicators (off / lit / flashing).
For indicator status, refer to “LED Indicator Displays” (P43).
(1) POWER button (P52, P74)
Turns the projector on or off.
(2) INPUT button (P54)
Switches the input signal.
(3) AUTO PC button (P57)
Adjusts tracking etc. automatically 
in accordance with the signal from 
a computer when the analog PC 
input is selected.
(4) KEYSTONE button (P68)
Corrects keystone distortion.(5) Pointer /...

43
Part Names
Before Use
•POWER ON (green) : Lights up or flashes under normal conditions when the 
power is on.
•WARNING (red) : Lights up or flashes when an error occurs.
•LAMP (orange) : Flashes when the time for replacing the lamp is near. 
When a lamp cover error occurs, the [WARNING] 
indicator will also flash. When a lamp error occurs, it will 
illuminate at the same time as the [WARNING] indicator.
•TEMP (red) : When the temperature inside the projector is high, it will 
flash. If the temperature...

Part Names
44
Input Terminal
(1) AUDIO OUT terminal (AUDIO OUT) (P139, P142)
Outputs the audio to external AV equipment. This outputs the audio signal that 
corresponds to the projected image signal.
(2) AUDIO IN terminal (AUDIO IN) (P137, P138, P141)
Receives the audio signal input for 2 kinds of image input other than HDMI.
The internal speaker outputs the audio for the selected image signal.
(3) Terminal for wired remote control (REMOTE) (P36)
This terminal is used to connect the remote control using...

45
Part Names
Before Use
Lens Shift Control
(1) Vertical lens shift dial
Slides the lens up or down for vertical image adjustment.
(2) Horizontal lens shift dial
Slides the lens left or right for horizontal image adjustment. For details on lens 
shift, refer to “Lens Shift Function” (P134).
Projection Lens
(1) Optical zoom adjustment (WUX450/WX520)
Move the lever to resize the image. (P57)
(2) Focus adjustment
Turn the focus ring to adjust image focus. (P59)
(1)
(2)
(1)
(2)
WUX450/WX520 WUX400ST/WX450ST...

46
Open Source Software
The product contains Open Source Software modules. For details, see 
“ThirdPartySoftware.pdf” (Third-Party Software License) in the 
OpenSourceSoftware folder in the LICENSE folder on the Setup CD-ROM. Each 
module’s license conditions are also available in the same folder.
■Software under the GPL and LGPL
The product includes modules licensed under the GPL and LGPL.
Source code can be examined in the GPL and LGPL folders on the supplied Setup 
CD-ROM.
■Software under the GNU...

47
Open Source Software
Before Use
NO SUPPORT
Canon Inc., and all its subsidiaries or its dealers do not make any support service 
regarding the source code. Canon Inc., and all its subsidiaries or its dealers shall 
not respond to any questions or enquiries, from you or any other customers, 
regarding the source code. 

48 

49
MULTIMEDIA PROJECTOR
Operation 

50