Canon Projector WUX450 User Manual

21
Safety Instructions
Safety Instructions
Federal Communication Commission Notice
Multimedia Projector, Model: WUX450/WX520/WUX400ST/WX450ST
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that 
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a 
Class B...

Safety Instructions
22
This section describes the safety symbols used in this manual. Important projector 
safety information is identified by the following symbols. Always observe the safety 
information by these symbols.
Safety Symbols in this Manual
Denotes the risk of death or serious injury from improper 
handling if the information is not observed. To ensure safe use, 
always observe this information.
Denotes the risk of injury from improper handling if the 
information is not observed. To ensure...

23
Safety Instructions
Safety Instructions
Precautions for Use
As this section contains important safety-related information, be sure to read the 
following carefully beforehand in order to use your projector correctly and safely.
During installation, keep the projector plug easily accessible so that the projector can be 
unplugged immediately if necessary, or keep a circuit breaker within reach.
If the following situations occur, turn the power off, remove the power plug from the 
power outlet and...

Safety Instructions
24
Pay attention to the following points regarding the power source, power plug and 
handling of the connector. Failure to do so may cause a fire, electric shock or personal 
injury.
•Do not use any power source with a voltage other than the voltage indicated 
(AC 100–240 V).
•Do not pull the power cord and be sure to hold the power plug or connector 
when removing. Incorrect handling may damage the power cord.
•Do not insert any metal objects into the contact parts of the power plug...

25
Safety Instructions
Safety Instructions
Pay attention to the following points regarding installation and handling of the projector. 
Failure to do so may cause a fire, electric shock or personal injury.
•Do not remove the cabinet from the projector or disassemble it. The interior 
of the projector contains high-voltage components as well as parts that are 
hot. If inspection, maintenance or repair is required, contact the Canon 
Customer Support Center.
•Do not disassemble or modify the projector...

Safety Instructions
26
Note the following precautions during lamp replacement or when a lamp has ruptured. 
Failure to do so could result in an electric shock or personal injury.
•Before replacing the lamp, always unplug the projector and wait at least an 
hour.
•Ruptured lamps may scatter shards of glass inside the projector. Contact the 
Canon Customer Support Center for cleaning and inspection of the projector 
interior and lamp replacement.
Precautions when replacing lamps that stop working
•If...

27
Safety Instructions
Safety Instructions
Pay attention to the following points regarding installation and handling of the projector.
•If the projector will not be used for a long period of time, be sure to remove 
the power plug from the power outlet to ensure safety. Failure to do so 
presents a risk of fire if dust accumulates on the plug or outlet.
•Parts of the cabinet around and above the exhaust vents may become hot 
during projection. Touching these areas during operation could cause burns 
to...

28
For Safe Use
Pay attention to the following points when carrying or transporting the projector.
•This projector is a precision instrument. Do not knock it over or subject it to 
impacts. Doing so may cause a malfunction.
•Do not reuse any packaging or shock-absorbent materials that were 
supplied with the projector at the time of purchase for transporting or 
shipping the projector. Protection of the projector cannot be guaranteed if 
used packaging or shock-absorbent materials are reused. Fragments...

29
For Safe Use
For Safe Use
Pay attention to the following points when installing or using the projector.
•Do not touch the lens with bare hands. Doing so may result in deterioration 
of image quality.
•If the projector is abruptly taken from a cool to a warm location, 
condensation may form on the lens or mirrors, which may cause a blurred 
image. Wait until the condensation has evaporated for the image projected 
to return to normal.
•Do not install the projector in a location where the temperature is...

30