Canon Projector WUX450 User Manual
Here you can view all the pages of manual Canon Projector WUX450 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 181
![Page 181
181
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
4Create a new network environment and set the IP address and subnet
mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
Example
IP address: 192.168.254.1
Subnet mask: 255.255.255.0
5Click [Apply] to close the network preference window.
■Resetting the IP Address Setting of the Computer
Follow the same procedure as for changing the IP address and...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-180.png "Page 181
181
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
4Create a new network environment and set the IP address and subnet
mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
Example
IP address: 192.168.254.1
Subnet mask: 255.255.255.0
5Click [Apply] to close the network preference window.
■Resetting the IP Address Setting of the Computer
Follow the same procedure as for changing the IP address and...")
181 Completing Computer Settings Installation and Maintenance Connecting to a Network 4Create a new network environment and set the IP address and subnet mask. The factory default IP address for the projector is “192.168.254.254”. Set an IP address which is different from this. Example IP address: 192.168.254.1 Subnet mask: 255.255.255.0 5Click [Apply] to close the network preference window. ■Resetting the IP Address Setting of the Computer Follow the same procedure as for changing the IP address and...
Page 182
![Page 182
Completing Computer Settings
182
The following information is displayed.
3Click [Settings] on the web screen.
The password input window appears.
4Enter the user name and password on the password input window, then
click [OK].
The factory default user name is “root” and the password is “system”.
Network Multiple Projection
DownloadFor downloading the Networked Multi-Projection
(NMPJ) program. (P211)
Projector control Displays the projector control screen.
Settings Shows the settings screen.
Projector...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-181.png "Page 182
Completing Computer Settings
182
The following information is displayed.
3Click [Settings] on the web screen.
The password input window appears.
4Enter the user name and password on the password input window, then
click [OK].
The factory default user name is “root” and the password is “system”.
Network Multiple Projection
DownloadFor downloading the Networked Multi-Projection
(NMPJ) program. (P211)
Projector control Displays the projector control screen.
Settings Shows the settings screen.
Projector...")
Completing Computer Settings 182 The following information is displayed. 3Click [Settings] on the web screen. The password input window appears. 4Enter the user name and password on the password input window, then click [OK]. The factory default user name is “root” and the password is “system”. Network Multiple Projection DownloadFor downloading the Networked Multi-Projection (NMPJ) program. (P211) Projector control Displays the projector control screen. Settings Shows the settings screen. Projector...
Page 183
![Page 183
183
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
The projector settings screen is displayed in the web browser.
■Network Setting
1To access the settings screen, click [Settings] on the web screen in step 3
of “Displaying the Network Configuration Screen” (P181).
2Select the function to set from the menu (1), then enter the setting in the
displayed field (2) and click [OK] (3).
To operate the projector from the computer, click [Projector control] (P195).
(2) (1)
(3)](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-182.png "Page 183
183
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
The projector settings screen is displayed in the web browser.
■Network Setting
1To access the settings screen, click [Settings] on the web screen in step 3
of “Displaying the Network Configuration Screen” (P181).
2Select the function to set from the menu (1), then enter the setting in the
displayed field (2) and click [OK] (3).
To operate the projector from the computer, click [Projector control] (P195).
(2) (1)
(3)")
183 Completing Computer Settings Installation and Maintenance Connecting to a Network The projector settings screen is displayed in the web browser. ■Network Setting 1To access the settings screen, click [Settings] on the web screen in step 3 of “Displaying the Network Configuration Screen” (P181). 2Select the function to set from the menu (1), then enter the setting in the displayed field (2) and click [OK] (3). To operate the projector from the computer, click [Projector control] (P195). (2) (1) (3)
Page 184
![Page 184
Completing Computer Settings
184
3A confirmation window appears. Check the contents and if they are
correct, click [Apply].
The settings are applied to the projector.
When you select [Network] in the menu, this message is displayed: “Save
completed. Please change setting and reconnect.”
If you select functions other than [Network], “Save completed” is displayed.
Click [Back to top] to return to the top page of the web screen.
Setting Basic Information [Network]
From [Network] in the settings screen,...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-183.png "Page 184
Completing Computer Settings
184
3A confirmation window appears. Check the contents and if they are
correct, click [Apply].
The settings are applied to the projector.
When you select [Network] in the menu, this message is displayed: “Save
completed. Please change setting and reconnect.”
If you select functions other than [Network], “Save completed” is displayed.
Click [Back to top] to return to the top page of the web screen.
Setting Basic Information [Network]
From [Network] in the settings screen,...")
Completing Computer Settings 184 3A confirmation window appears. Check the contents and if they are correct, click [Apply]. The settings are applied to the projector. When you select [Network] in the menu, this message is displayed: “Save completed. Please change setting and reconnect.” If you select functions other than [Network], “Save completed” is displayed. Click [Back to top] to return to the top page of the web screen. Setting Basic Information [Network] From [Network] in the settings screen,...
Page 185
185 Completing Computer Settings Installation and Maintenance Connecting to a Network ItemExplanationFactory default setting Password User name When logging into the web screen, enter the user name in 1-byte alphanumeric characters and symbols (4 - 15 characters).root New password When logging into the web screen, enter the password in 1-byte alphanumeric characters and symbols (4 - 15 characters).system Confirm new password For confirmation, enter the same password that you entered in [New...
Page 186
![Page 186
Completing Computer Settings
186
Specifying Networked Multi-Projection Settings: [NMPJ Password]
From [NMPJ Password] in the settings screen, you can specify the items needed
for NMPJ authentication. For the setting procedure, refer to “Displaying the
Network Configuration Screen” (P181).
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Displaying the Network
Configuration Screen”...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-185.png "Page 186
Completing Computer Settings
186
Specifying Networked Multi-Projection Settings: [NMPJ Password]
From [NMPJ Password] in the settings screen, you can specify the items needed
for NMPJ authentication. For the setting procedure, refer to “Displaying the
Network Configuration Screen” (P181).
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Displaying the Network
Configuration Screen”...")
Completing Computer Settings 186 Specifying Networked Multi-Projection Settings: [NMPJ Password] From [NMPJ Password] in the settings screen, you can specify the items needed for NMPJ authentication. For the setting procedure, refer to “Displaying the Network Configuration Screen” (P181). Setting Up Email [Mail] From [Mail] in the settings screen, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to “Displaying the Network Configuration Screen”...
Page 187
187 Completing Computer Settings Installation and Maintenance Connecting to a Network ItemExplanationFactory default setting To : Enter the recipient address for error mails in 1-byte alphanumeric characters and symbols (1 - 63 characters).MailUserAccount Cc: Enter the CC address for error mails in 1-byte alphanumeric characters and symbols (1 - 63 characters). From: Enter the sender address for error mails in 1-byte alphanumeric characters and symbols (1 - 63 characters)[email protected]...
Page 188
![Page 188
Completing Computer Settings
188
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to “Displaying the Network Configuration Screen” (P181).
ItemExplanationFactory default setting
Mail authentication Select the mail authentication
method. If OFF is selected,
the other mail authentication
settings cannot be changed.OFF
User name
Enter the user...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-187.png "Page 188
Completing Computer Settings
188
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to “Displaying the Network Configuration Screen” (P181).
ItemExplanationFactory default setting
Mail authentication Select the mail authentication
method. If OFF is selected,
the other mail authentication
settings cannot be changed.OFF
User name
Enter the user...")
Completing Computer Settings 188 Mail Authentication Settings [Mail auth] From [Mail auth] in the settings screen, you can configure the settings for authentication of mail that is sent when an error occurs. For the setting procedure, refer to “Displaying the Network Configuration Screen” (P181). ItemExplanationFactory default setting Mail authentication Select the mail authentication method. If OFF is selected, the other mail authentication settings cannot be changed.OFF User name Enter the user...
Page 189
![Page 189
189
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
Sending a Test Mail [Send test mail]
From [Send test mail] in the settings screen, you can send a test mail to the mail
address that was set in [Mail]. The settings cannot be changed from this screen.
SNMP Settings [SNMP]
From [SNMP] in the settings screen, you can configure the settings related to
control of projectors which use SNMP (Simple Network Management Protocol). For
the setting procedure, refer to...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-188.png "Page 189
189
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
Sending a Test Mail [Send test mail]
From [Send test mail] in the settings screen, you can send a test mail to the mail
address that was set in [Mail]. The settings cannot be changed from this screen.
SNMP Settings [SNMP]
From [SNMP] in the settings screen, you can configure the settings related to
control of projectors which use SNMP (Simple Network Management Protocol). For
the setting procedure, refer to...")
189 Completing Computer Settings Installation and Maintenance Connecting to a Network Sending a Test Mail [Send test mail] From [Send test mail] in the settings screen, you can send a test mail to the mail address that was set in [Mail]. The settings cannot be changed from this screen. SNMP Settings [SNMP] From [SNMP] in the settings screen, you can configure the settings related to control of projectors which use SNMP (Simple Network Management Protocol). For the setting procedure, refer to...
Page 190
![Page 190
Completing Computer Settings
190
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can set the names and location
names which are used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, refer to “Displaying the Network
Configuration Screen” (P181).
ItemExplanationFactory default setting
SNMP Select the SNMP function version. If
OFF is selected, the SNMP function
will be turned off and the other...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-189.png "Page 190
Completing Computer Settings
190
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can set the names and location
names which are used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, refer to “Displaying the Network
Configuration Screen” (P181).
ItemExplanationFactory default setting
SNMP Select the SNMP function version. If
OFF is selected, the SNMP function
will be turned off and the other...")
Completing Computer Settings 190 Setting Projector Information [Projector info.] From [Projector info.] in the settings screen, you can set the names and location names which are used to identify projectors when multiple projectors are installed on the network. For the setting procedure, refer to “Displaying the Network Configuration Screen” (P181). ItemExplanationFactory default setting SNMP Select the SNMP function version. If OFF is selected, the SNMP function will be turned off and the other...