Canon Projector WUX450 User Manual
Here you can view all the pages of manual Canon Projector WUX450 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 221
221 Table of Contents Safety Instructions Before Use Operation Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation and Maintenance Installation Connecting to a Network Maintenance Networked Multi-Projection Networked Multi-Projection Overview Operation in Each Mode Functions in All Modes AppendixOther Information Index Operation in Each Mode
Page 222
![Page 222
222
Using the Projector in Direct Mode
In this mode, one computer is connected to one projector over the network.
Procedure
1In the mode selection menu, select [Direct Mode].
2The Direct Mode window is displayed. Click .
To connect to projectors in another subnet, enter the projector’s IP address in the [PJ IP
address] field and click .](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-221.png "Page 222
222
Using the Projector in Direct Mode
In this mode, one computer is connected to one projector over the network.
Procedure
1In the mode selection menu, select [Direct Mode].
2The Direct Mode window is displayed. Click .
To connect to projectors in another subnet, enter the projector’s IP address in the [PJ IP
address] field and click .")
222 Using the Projector in Direct Mode In this mode, one computer is connected to one projector over the network. Procedure 1In the mode selection menu, select [Direct Mode]. 2The Direct Mode window is displayed. Click . To connect to projectors in another subnet, enter the projector’s IP address in the [PJ IP address] field and click .
Page 223
![Page 223
223
Using the Projector in Direct Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. Click the projector to connect
to.
4The Direct Mode window is displayed again. Click [Start projecting].
The computer screen is now projected.
For details on the projector selection menu, refer to “Using the Projector Selection Menu”
(P258).
• If the [NMPJ Password] setting has been configured on the projector’s settings screen
(P186), the password is now requested....](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-222.png "Page 223
223
Using the Projector in Direct Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. Click the projector to connect
to.
4The Direct Mode window is displayed again. Click [Start projecting].
The computer screen is now projected.
For details on the projector selection menu, refer to “Using the Projector Selection Menu”
(P258).
• If the [NMPJ Password] setting has been configured on the projector’s settings screen
(P186), the password is now requested....")
223 Using the Projector in Direct Mode Networked Multi-Projection Operation in Each Mode 3The projector selection menu is displayed. Click the projector to connect to. 4The Direct Mode window is displayed again. Click [Start projecting]. The computer screen is now projected. For details on the projector selection menu, refer to “Using the Projector Selection Menu” (P258). • If the [NMPJ Password] setting has been configured on the projector’s settings screen (P186), the password is now requested....
Page 224
Using the Projector in Direct Mode 224 Direct Mode Window (1) Help View application help. (2) Back to mode selection Return to the mode selection menu. (3) Compact display View the window at a compact size. (P274) (4) Minimize Minimize the window to the taskbar. To view the window again, click the taskbar icon. (5) Exit Return to the mode selection menu. (6) Projector list View a list of projectors. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (12) (11) (13) (14) (15)
Page 225
225 Using the Projector in Direct Mode Networked Multi-Projection Operation in Each Mode (7) IP address To connect to projectors in another subnet, enter the projector’s IP address here and click (8). (8) Find projectors Find the projector with the IP address entered in (7). Results of projector searching are shown in (9). (9) Projector information Indicates the name, installation location, and IP address of the projector selected in the list or found after searching by IP address. (10) Password...
Page 226
![Page 226
226
Using the Projector in Meeting Mode
In meeting mode, multiple computers are connected to multiple projectors. This
mode is intended for group meetings where multiple computers are used. Up to ten
computers and six projectors can be connected.
Creating a Session
1In the mode selection menu, select [Meeting Mode].
2The session selection menu is displayed. Click [New].](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-225.png "Page 226
226
Using the Projector in Meeting Mode
In meeting mode, multiple computers are connected to multiple projectors. This
mode is intended for group meetings where multiple computers are used. Up to ten
computers and six projectors can be connected.
Creating a Session
1In the mode selection menu, select [Meeting Mode].
2The session selection menu is displayed. Click [New].")
226 Using the Projector in Meeting Mode In meeting mode, multiple computers are connected to multiple projectors. This mode is intended for group meetings where multiple computers are used. Up to ten computers and six projectors can be connected. Creating a Session 1In the mode selection menu, select [Meeting Mode]. 2The session selection menu is displayed. Click [New].
Page 227
![Page 227
227
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. In the list of projectors at left,
click the projector to connect to.
You can select up to 6 projectors. Selected projectors are listed at right.
4Click [Next].
• If the [NMPJ Password] setting has been configured on the projector’s settings screen
(P186), the password is now requested. Enter the password.
• To clear a selected projector, click in the upper right of...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-226.png "Page 227
227
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. In the list of projectors at left,
click the projector to connect to.
You can select up to 6 projectors. Selected projectors are listed at right.
4Click [Next].
• If the [NMPJ Password] setting has been configured on the projector’s settings screen
(P186), the password is now requested. Enter the password.
• To clear a selected projector, click in the upper right of...")
227 Using the Projector in Meeting Mode Networked Multi-Projection Operation in Each Mode 3The projector selection menu is displayed. In the list of projectors at left, click the projector to connect to. You can select up to 6 projectors. Selected projectors are listed at right. 4Click [Next]. • If the [NMPJ Password] setting has been configured on the projector’s settings screen (P186), the password is now requested. Enter the password. • To clear a selected projector, click in the upper right of...
Page 228
![Page 228
Using the Projector in Meeting Mode
228
5A window for creating the session is displayed. Specify a session name,
password, nickname, and desktop (primary or secondary monitor for
projection), and then click [OK].
6The Meeting Mode window is displayed. Select a projector to control from
the pull-down list.
• If you choose to set a session password, other users must enter that password to join
the session. To set a password, click [Set] and enter the password.
• Desktop selection is only available with...](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-227.png "Page 228
Using the Projector in Meeting Mode
228
5A window for creating the session is displayed. Specify a session name,
password, nickname, and desktop (primary or secondary monitor for
projection), and then click [OK].
6The Meeting Mode window is displayed. Select a projector to control from
the pull-down list.
• If you choose to set a session password, other users must enter that password to join
the session. To set a password, click [Set] and enter the password.
• Desktop selection is only available with...")
Using the Projector in Meeting Mode 228 5A window for creating the session is displayed. Specify a session name, password, nickname, and desktop (primary or secondary monitor for projection), and then click [OK]. 6The Meeting Mode window is displayed. Select a projector to control from the pull-down list. • If you choose to set a session password, other users must enter that password to join the session. To set a password, click [Set] and enter the password. • Desktop selection is only available with...
Page 229
229 Using the Projector in Meeting Mode Networked Multi-Projection Operation in Each Mode 7In the list at right, select a computer to use with your designated projector. Drag the computer to a desired position in the layout area. You can arrange up to four computers as desired in the layout area. 8Drag the computers for use in projection in the layout area to rearrange them, as needed. During projection, screens of each computer will be arranged according to their position in the layout area.
Page 230
![Page 230
Using the Projector in Meeting Mode
230
9Click [Start projecting].
Images are now projected from the computers in the layout area.
10To end the session, click or in the upper right.
• To stop projection, click [Stop projecting].
• To rearrange the layout during projection, click [Start projecting] again. Note that if you
simply rearrange the layout, the new layout will not be applied to projection.](http://img.usermanuals.tech/thumb/14/99365/w300_projector_manual_7685_d-229.png "Page 230
Using the Projector in Meeting Mode
230
9Click [Start projecting].
Images are now projected from the computers in the layout area.
10To end the session, click or in the upper right.
• To stop projection, click [Stop projecting].
• To rearrange the layout during projection, click [Start projecting] again. Note that if you
simply rearrange the layout, the new layout will not be applied to projection.")
Using the Projector in Meeting Mode 230 9Click [Start projecting]. Images are now projected from the computers in the layout area. 10To end the session, click or in the upper right. • To stop projection, click [Stop projecting]. • To rearrange the layout during projection, click [Start projecting] again. Note that if you simply rearrange the layout, the new layout will not be applied to projection.