Canon Projector WUX450 User Manual

241
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
11The following confirmation message is displayed. Click [Close].
Return to the mode selection menu. 

Using the Projector in Classroom Mode
242
Joining an Existing Session
1In the mode selection menu, select [Classroom Mode].
2The session selection menu is displayed. Click [Enter] next to the session 
to join.
To join a session in another subnet, click   and enter the projector’s IP address to find 
the projector. The application will search for sessions in the other subnet. For details, 
refer to “Using the Session Selection Menu” (P256). 

243
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
3A session login window is displayed. Specify the session password, your 
nickname, and desktop (primary or secondary monitor for display), and 
then click [OK].
4The Classroom Mode window (for joining a session) is displayed. Users 
joining sessions cannot change the projection layout or start or stop 
projection.
Desktop selection is only available with computers that have dual monitor support. 

Using the Projector in Classroom Mode
244
5To end the session, click   or   in the upper right.
6The following confirmation message is displayed. Click [Exit].
Return to the mode selection menu. 

245
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
Classroom Mode Window (Starting a Session)
(1) Help
View application help.
(2) Back to mode selection
Return to the mode selection menu.
(3) Compact display
View the window at a compact size. (P274)
(4) Minimize
Minimize the window to the taskbar. To view the window again, click the 
taskbar icon.
(5) Exit
Return to the mode selection menu.
(6) Projector list
View a list of projectors.
(1)
(6)
(7)
(11)
(13)...

Using the Projector in Classroom Mode
246
(7) Projector pull-down list
Lists connected projectors. Your actions on this window apply to the projector 
selected here.
(8) Computers
Lists connected computers. To prepare computers for projection, drag them to 
the layout area. Your own computer is listed first.
In  , the computer’s display position is indicated by a white square.
(9) Blank the computer
Pause projection from the computer. Click again to resume projection.
(10) Settings
Display the setting...

247
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
Classroom Mode Window (Joining a Session)
(1) Help
View application help.
(2) Back to mode selection
Return to the mode selection menu.
(3) Compact display
View the window at a compact size. (P274)
(4) Minimize
Minimize the window to the taskbar. To view the window again, click the 
taskbar icon.
(5) Exit
Return to the mode selection menu.
(6) Projector pull-down list
Lists connected projectors. Your actions on...

Using the Projector in Classroom Mode
248
(7) Layout area
Lists computers selected for projection.
(8) Projection status
Indicates the projection status.
(9) Computer
A number is shown here only when secondary monitor connectivity is activated 
on the computer you are using. Clicking the number will switch between the 
primary and secondary monitor.
(10) Blank the computer
Pause projection from the computer. Click again to resume projection.
(11) Settings
Display the setting window. (P272) 

249
Networked Multi-Projection
Operation in Each Mode
Using the Projector in Broadcast Mode
In Broadcast Mode, a single computer is connected to up to 12 projectors.
Procedure
1In the mode selection menu, select [Broadcast Mode].
2The projector selection menu is displayed. In the list of projectors at left, 
click the projector to connect to.
You can select up to 12 projectors. Selected projectors are listed at right.
Before projecting from projectors in other subnets in Broadcast Mode, you must...

Using the Projector in Broadcast Mode
250
3Click [Next].
4The Broadcast Mode window is displayed. Click [Start projecting].
The computer screen is now projected.
• If the [NMPJ Password] setting has been configured on the projector’s settings screen 
(P186), the password is now requested. Enter the password.
• To clear a selected projector, click   in the upper right of that projector listing.
• For details on the projector selection menu, refer to “Using the Projector Selection 
Menu” (P258).
To stop...