Canon printer imageCLASS D1170 User Manual

							Before Using the Machine
1-4
Machine Components
External View (Back)
①USB portConnect the USB (Universal Serial Bus) cable.
②Ethernet port Connect the network cable.
③  Ex
ternal device jack (For the D1180/D1170/
D1150)
Connect an external device.
④  T
elephone line jack (For the D1180/D1170/
D1150)
Connect the external telephone cable.
⑤Power socket Connect the power cord.
⑥Duplex unit cover Open this cover to clear paper jams.
⑦Sub-output tray Outputs paper with the printed side facing up.
⑧Rear cover Open this cover to clear paper jams. 
						

							Before Using the Machine
1-5
Machine Components
Internal View 
①Scanning areaScans documents from the ADF.
②Platen glass Place documents.
③Toner cartridge When toner runs out, pull out the empty toner 
cartridge, and replace it with a new one.
④Duplex unit Enables you to use the 2-Sided mode for copying, 
faxing, sending, or scanning.
⑤Paper size switch lever Switch the lever according to the paper size for 2-
sided copying or 2-sided printing. 
						

							Before Using the Machine
1-6
Operation Panel
Operation Panel
This section describes the names and functions of the operation panel keys, and describes 
all the parts on the operation panel.
Main Operation Panel
D1180/D1170● 
						

							Before Using the Machine
1-7
Operation Panel
D1150
 D1120
●
● 
						

							Before Using the Machine
1-8
Operation Panel
①Paper Select indicatorIndicates the selected paper source.
②[Collate/2 on 1] key Press to collate copies, or press to set 2 on 1 
copying. Also press to set ID card copying.
③[Paper Select] key Press to select a paper source (paper cassette or 
multi-purpose tray).
④[Enlarge/Reduce] key Press to enlarge or reduce copy ratio.
⑤[Menu] key Press to select or cancel the modes in setting 
menus.
⑥Display Displays messages and prompts during 
operation. Displays selection, text, and numbers 
when adjusting the settings.
⑦[COPY ] key Press to switch to the Copy mode.
⑧[SEND/FAX] key (For the D1180/D1170) Press to switch to the Send/Fax mode.
[FAX] key (For the D1150)
Press to switch to the Fax mode.
⑨[SCAN] key Press to switch to the Scan mode.
⑩[Paper Settings] key Press to specify the paper size and type for the 
paper cassette or multi-purpose tray.
⑪Numeric keys Enter alphanumeric characters and symbols.
⑫[Log In/Out] key (ID key) Press when setting or enabling Department ID/
User ID management.
⑬[Clear] key Press to clear entered alphanumeric characters.
⑭[Report] key Press to print reports and lists manually. ⑮[Energy Saver] key
Press to set or cancel the Sleep mode manually. 
The key lights green when the Sleep mode is set, 
and goes off when the mode is canceled.
⑯[Stop/Reset] key Press to stop a current job. Also press to return 
the machine to the standby mode.
⑰[Start] key Press to start copying, scanning and sending 
documents.
⑱Error indicator Blinks when an error has occurred.
⑲Processing/Data indicator Blinks when the machine is working. Lights when 
the machine has waiting jobs and stores the data 
in memory.
⑳[Tone] key Press to switch from rotary pulse to tone dialing 
(for the D1180/D1170/D1150). Also press to 
switch the input mode.
㉑[Density] key Press to adjust the density for copy or documents 
you send.
㉒[Image Quality] key Press to select image quality for copy or fax.
㉓
 key
Press to increase the value for various settings. 
Also press to see the next item in the menu. For 
the D1180/D1170/D1150, you can use this key to 
temporarily adjust the monitor tone volume.
㉔[OK] key Press to accept a set function or mode.
Also press and hold to print a sample page when 
you are in the copy mode. For details, see 
“Printing a Sample Page,
” on p. 3-32. 
						

							Before Using the Machine
1-9
Operation Panel
㉕ key
Press to decrease the value for various settings. 
Also press to see the previous item in the menu. 
For the D1180/D1170/D1150, you can use this 
key to temporarily adjust the monitor tone 
volume.
㉖[Job Cancel/Status Monitor] key Press to cancel the job stored in memory. 
Also press to check the status of jobs such as 
copy, fax, print, etc.
㉗[View Settings] key Press to confirm the settings of the copy, fax, and 
send function.
㉘[2-Sided] key Press to copy or send 2-sided documents.
㉙ 2-Sided mode indicator Indicates the selected 2-Sided mode for copying. 
						

							Before Using the Machine
1-10
Operation Panel
Send Operation Panel
D1180/D1170
D1150
●
● 
						

							Before Using the Machine
1-11
Operation Panel
①[Address Book] keyPress to search pre-registered recipients under 
one-touch keys and coded dial codes by name, 
number, or address.
②[Recall/Pause] key (For the D1180/D1170) Press to recall previously set send jobs, including 
the destinations, scan settings, and send settings. 
Press to enter a pause between or after the 
telephone/fax number when dialing or 
registering numbers.
[Redial/Pause] key (For the D1150)
Press to recall the last three destinations. Press to 
enter a pause between or after the telephone/fax 
number when dialing or registering numbers.
③[Coded Dial] key Press to specify recipients registered under coded 
dial codes.
④[Hook] key Press when you want to dial without lifting up 
the handset of the external telephone.
⑤One-Touch keys Press to specify recipients registered under one-
touch keys. 
						

							Before Using the Machine
1-12
Display (Standby Mode)
Display (Standby Mode)
This section describes the display of the operation panel of the standby mode.
Depending on your needs, you can change the standby display which appears when the main power switch is turned ON. For details, 
see “Setting the Initial Function,” in the e-Manual.
When the main power switch is turned ON, the message  is shown until the standby display appears.
If the Auto Clear function is activated, the display returns to the standby mode.
–
–
–
Copy Mode
W
thout optonal paper cassette
            T E X T / P H O T O 1 0 0 %                 L T R0 1
Wth optonal paper cassette
            T E X T / P H O T O 1 0 0 %       A U T O0 1
①Zoom ratio
②Paper size
③Quantity
④Image quality
⑤Density
Send Mode/Fax Mode
D1180/D1170
S E L E C T : O K F A X
●
●
●
D1150
F a x O n l y                   F I N E 1 2 / 3 1 / 2 0 0 8   W E D   1 5 : 5 0
①Date & Time
②Image quality
③Receive mode
Scan Mode
S C A N N I N G   M O D E
● 
						

							Before Using the Machine
1-13
Display (Standby Mode)
Log In Mode
If the Department ID Management or User ID 
Management is set, the Log In screen is displayed. 
For information on the Department ID Management 
or User ID Management, see “Security,” in the e-
Manual.For Department ID Management
    E N T E R   D E P T . I D
Use  –  [numeric keys] to enter the 
Department ID and password, then press [OK] or 
  [Log In/Out].
For User ID Management
    E N T E R   U S E R   I D           : a
Use   –  [numeric keys] to enter the User ID and 
password, then press [OK] or 
  [Log In/Out].
Make sure to press  [Log In/Out] after using the machine 
when the Department ID/User ID Management is set.
When the main power switch is turned ON, the message 
 is shown until the standby 
display appears.
Ô
Ô
–
–