Canon printer imageCLASS D1170 User Manual

							Copying 
3-24
2-Sided Copying
2-Sided Copying
This mode enables you to make 2-sided copies from 1-sided or 2-sided originals, or make 1-
sided copies from 2-sided originals. This enables you to cut print costs in half when copying 
in large quantities. This feature can be used together with both “Collating Copies”
 (see p. 3-
19) and “2 on 1 Combination”
 (see p. 3-21). The default setting is .
Paper used to make 2-sided copies must conform to the following specifications: Paper size: LTR, A4 and LGL (envelopes cannot be used for 2-sided copying)
Paper weight: 16 to 32 lb (60 to 120 g/m
2)
Make sure to close the sub-output tray before making 2-sided copies.
Do not open the sub-output tray while making 2-sided copies.
When making 2-sided copies, make sure to confirm that the paper size switch lever on the rear side of the machine is set 
to the appropriate position. Paper jams may occur if the lever is not set appropriately. For details on how to set the paper 
size switch lever, see “Setting the Paper Size Switch Lever,
” on p. 2-16.
–
•
•
–
–
– 
						

							Copying 
3-25
2-Sided Copying
1 to 2-Sided Copying
You can make 2-sided copies from 1-sided 
documents.
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [2-Sided] repeatedly to select 2-SIDED>, then press [OK].
1   >   2 - S I D E D
If there are odd number of documents when the 
1-Sided to 2-Sided mode is used, the back side of 
the last copy is left blank.
4 
Press  or  to select  
or , then press [OK].
        B O O K   T Y P E T Y P E   O F   O U T P U T
: The front and back sides of the 
copy will have the same top-bottom 
orientation.
: The front and back sides 
of the copy will have the opposite top-
bottom orientation.
For the landscape oriented documents:  
When  is selected, the front and 
back sides of the copy will have the opposite top-
bottom orientation. When  is 
selected, the front and back sides of the copy will 
have the same top-bottom orientation.
5 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %   *             L T R0 1
6 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK].
To cancel all settings, press  [Stop/Reset].
When you switch the mode by pressing the 
mode keys such as 
 [SEND/FAX]/ [FAX], all settings will be also canceled. If 
you want to keep the settings, store the settings 
as follows:  
 [Menu] →  →  →  (See “COPY SETTINGS,” 
on p
. 13-5.)
You can skip step 4. In this case, the machine 
scans 1-sided documents to make 2-sided, 
 copies.
–
–
–
–
– 
						

							Copying 
3-26
2-Sided Copying
2 to 2-Sided Copying
You can make 2-sided copies from 2-sided 
documents.
1 
Place documents in the ADF.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [2-Sided] repeatedly to select 
 2-SIDED>, then press [OK].
2   >   2 - S I D E D
4 
Press  or  to select  
or  for the document 
layout, then press [OK].
        B O O K   T Y P E T Y P E   O F   O R I G I N A L
: The front and back sides of the 
document will have the same top-bottom 
orientation.
: The front and back sides 
of the document will have the opposite top-
bottom orientation.
–
–
5 
 
Press  or  to select  
or  for the output 
layout, then press [OK].
        B O O K   T Y P E T Y P E   O F   O U T P U T
: The front and back sides of the 
copy will have the same top-bottom 
orientation.
: The front and back sides 
of the copy will have the opposite top-
bottom orientation.
6 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %   *             L T R0 1
7 
Press  [Start].
To cancel all settings, press  [Stop/Reset].
When you switch the mode by pressing the 
mode keys such as 
 [SEND/FAX]/ [FAX], all settings will be also canceled. If 
you want to keep the settings, store the settings 
as follows: 
 [Menu] →  →  →  (See “COPY SETTINGS,” 
on p
. 13-5.)
You can skip steps 4 and 5. In this case, the 
machine scans 2-sided documents in the 
 orientation and outputs the 
same way.
If you press 
 [Start] in step 4 after selecting 
, the machine scans 2-sided 
documents in the  
orientation and outputs the same way.
–
–
–
–
–
– 
						

							Copying 
3-27
2-Sided Copying
2 to 1-Sided Copying
You can make 1-sided copies from 2-sided 
documents.
1 
Place documents in the ADF.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [2-Sided] repeatedly to select 
1-SIDED>, then press [OK].
2   >   1 - S I D E D
4 
Press  or  to select  
or , then press [OK].
        B O O K   T Y P E T Y P E   O F   O R I G I N A L
: The front and back sides of the 
document will have the same top-bottom 
orientation.
: The front and back sides 
of the document will have the opposite top-
bottom orientation.
–
–
5 
Use  
–  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %   *             L T R0 1
6 
Press  [Start].
You can skip step 4. In this case, the machine 
scans 2-sided documents in the  
orientation to make 1-sided copies.
To cancel all settings, press  [Stop/Reset].
When you switch the mode by pressing the 
mode keys such as 
 [SEND/FAX]/ [FAX], all settings will be also canceled. If 
you want to keep the settings, store the settings 
as follows: 
 [Menu] →  →  →  (See “COPY SETTINGS,” 
on p
. 13-5.)
–
– 
						

							Copying 
3-28
Adjusting Sharpness
Adjusting Sharpness
You can set the sharpness of the copied image. The default setting is .
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [Menu].
3 
Press  or  to select , then press [OK].
  3 . C O P Y   S E T T I N G S M E N U
4 
Press  or  to select , 
then press [OK].
  2 . S H A R P N E S S C O P Y   S E T T I N G S 3
5 
Press  or  to select to adjust the 
sharpness (1 to 9), then press [OK].
                            5 S H A R P N E S S
The highest sharpness level is 9 and the lowest 
is 1. To copy text or lines clearly, select a high 
sharpness level. To copy documents containing 
printed images or other halftones, select a low 
sharpness level.
6 
Press  [Stop/Reset] to return to the 
standby mode.
7 
Press  [COPY ].
8 
Use   –  (numeric keys) to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %                 L T R0 1
9 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 
[Start] once for each page. 
						

							Copying 
3-29
Selecting Paper Size Group
Selecting Paper Size Group
This section describes how to select the paper size group. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  3 . C O P Y   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . P A P E R   S I Z E   G R O U P C O P Y   S E T T I N G S
4 
Press  or  to select a paper size 
group, then press [OK].
                            I N C H E S P A P E R   S I Z E   G R O U P
You can select from the following paper size 
groups: , , 
5 
Press  [Stop/Reset] to return to the 
standby mode. 
						

							Copying 
3-30
Changing Standard Mode
Changing Standard Mode
The Standard mode is the combination of copy modes that the machine automatically 
applies when the power is turned ON, or when 
 [Stop/Reset] is pressed. You can change 
the Standard mode to suit your needs. The default settings are as follows:
: 
:  (5)
:  (100%)
: 
: 
: 
: 
–
–
–
–
–
–
–
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  3 . C O P Y   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  1 . S T A N D A R D   S E T T I N G S C O P Y   S E T T I N G S
4 
Press  or  to select the desired 
setting item, then press [OK].
  1 . I M A G E   Q U A L I T Y S T A N D A R D   S E T T I N G S
You can specify the following settings:  
, , , , , , 

If you press  [Stop/Reset] before pressing [OK], 
the setting will not be registered.
5 
Press  [Stop/Reset] to return to the 
standby mode. 
						

							Copying 
3-31
Initializing the Standard Mode
Initializing the Standard Mode
This section describes how to initialize the current copy setting mode including standard 
mode.
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  3 . C O P Y   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  4 . I N I T .   C O P Y   S E T . C O P Y   S E T T I N G S
4 
Press  to select .
<   Y E S                       N O   > O K   T O   I N I T I A L I Z E ?
5 
Press  [Stop/Reset] to return to the 
standby mode. 
						

							Copying 
3-32
Printing a Sample Page
Printing a Sample Page
This machine provides you to print a sample page. You can use this function to test how the 
printouts will look with current settings.
The paper size must be LTR.
The paper type must be Plain Paper (16 to 21 lb (60 to 80 g/m2)).
Make sure that the paper setting is appropriate and the paper is loaded correctly. No error message is displayed, even if 
the sample page is not printed correctly.
You cannot cancel printing a sample page once printing has started.
You cannot use this function while making copies, scanning documents, or printing reports/lists.
–
–
–
–
–
1 
Press  [COPY ].
2 
Press and hold [OK].
The sample page will be printed on both sides 
of the paper. 
						

							Printing 
4
Printing 
This chapter describes the basic print features.
Overview of the Print Functions ................................. 4-2
Introduction to Using Print Functions  ....................... 4-4
Printing Documents from a Computer....................... 4-5
Scaling Documents  ...................................................... 4-7
Printing Multiple Pages on One Sheet  ....................... 4-9
2-Sided Printing  .........................................................4-11
Checking and Canceling Print Jobs  ..........................4-12