Canon Laser Shot Lbp3500 User Guide

6-24
Optional Accessories
6
Duplex Unit
Installation Space
The dimensions of each part, foot positions, and the space required for using the 
printer with the duplex unit installed are indicated in the following figures:
544
200
121.6 172.2
93.8184
88.640.6
518
438.7 32.6
277 272 286.6
344
325100100
1193.7
430
718
Tray Extension
Auxiliary Tray
Multi-purpose Tray
Sub-output TrayAuxiliary TrayTray Extension
Auxiliary Tray
(mm)
(mm)
• Dimensions of the Printer
Front Surface
Front Surface
• Required...

6-25
Optional Accessories
6
Duplex Unit
Installing the Duplex Unit
The duplex unit is to be installed on the rear of the printer unit.
NOTE
The packing materials may be changed in form or position to be placed, or may be added 
or removed without notice.
1Turn the printer and computer OFF aa a a, remove the USB cable 
bb b b, and then disconnect the power plug from the AC power 
outlet 
cc c c.
2Remove all the interface cables and the power cord from the 
printer.
c
ab
a
 

6-26
Optional Accessories
6
Duplex Unit
3Remove the duplex unit cover.
Hook your finger in the opening (A) of the duplex unit cover and remove it.
IMPORTANT
Keep the duplex unit cover. The duplex unit cover is required when the duplex unit is removed.
4Install the duplex unit.
Push the duplex unit into the printer fi rmly and horizontally as shown in the fi gures.
(A)
 

6-27
Optional Accessories
6
Duplex Unit
CAUTION
Push the duplex unit gently to avoid catching your hands. Be careful not to 
hurt your hands.
IMPORTANT
If the duplex unit is not installed on the printer firmly (if there is any space between the rear of 
the printer and the duplex unit), this may result in misfeeds.
 

6-28
Optional Accessories
6
Duplex Unit
5Connect the interface cables except for the USB cable, and 
connect the power cord.
6Plug the power plug into the AC power outlet.
7Connect the USB cable.
NOTE
After installing the duplex unit, you have to specify the settings for the optional 
accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You 
can obtain the status of the optional accessories automatically by clicking [Get 
Device Status] in the [Configuration]/[Device Settings]...

6-29
Optional Accessories
6
Duplex Unit
1Turn the printer and computer OFF, remove the USB cable, 
and then disconnect the power plug from the AC power outlet.
2Remove all the interface cables and the power cord from the 
printer.
3Pull out the duplex unit gently until it stops aa a a, then raise the 
front side of the duplex unit and remove it from the printer 
bb b b.
b
a
 

6-30
Optional Accessories
6
Duplex Unit
4Install the duplex unit cover.
Hook your finger in the opening (A) of the duplex unit cover and install it.
5Connect the interface cables except for the USB cable, and 
connect the power cord.
6Plug the power plug into the AC power outlet.
7Connect the USB cable.
(A)
 

 6-31 
Network Board 6 
Optional Accessories
 Network Board 
Install the network board in the expansion slot located on the rear of the printer. 
*For NB-C2, a CD-ROM may be supplied with the network board. 
By installing the optional network board, you can use LBP3500 directly connected 
to a network.
Network board Screws (2 pieces) Guide booklet Ferrite core
(Only for NB-C1)
ER R L NK 1 00
Print server 
(Windows 98/Me/2000/XP/Server 2003/Vista)
Client 
(Windows 98/Me/2000/XP/Server 2003/Vista)
Client...

 6-32 
Optional Accessories
 
6 
Network Board
CAUTION
 
•
  Be sure to turn the printer OFF, unplug the power plug, and then disconnect all 
the interface cables and power cord from the printer before installing the 
network board. If a USB cable is connected, turn the computer off, and then 
remove the USB cable. If you attempt to install the network board when the 
printer is ON or any cable is connected to the printer, this may result in an 
electrical shock. 
•
 
Be careful when handling the network...

 6-33 
Optional Accessories
 6 
Network Board 
  
Parts and Their Functions  
a a a
a  
Printer Connector 
Connects to the printer. Do not touch the connector 
directly with your hands.  
b b b
b  
LAN Connector 
Connects to a 10BASE-T/100BASE-TX LAN cable.  
c c
c
c  
100 Indicator (Green) 
Comes on when the network board is connected to 
the network by 100BASE-TX.
Does not come on when connected by 10BASE-T.  
d d d
d  
LNK Indicator (Green) 
Comes on when the network board is connected to 
the network...