Canon Laser Shot Lbp3500 User Guide

6-4
Optional Accessories
6
Optional Accessories
Duplex Unit
The duplex unit DU-67 enables you to perform automatic 2-sided printing. The 
duplex unit is to be installed on the rear of the printer unit. The duplex unit can 
perform automatic 2-sided printing on plain paper (60 - 90 g/m
2) of the standard 
paper sizes (A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, Letter, Executive, 8K, and 
16K) and following custom paper sizes.
•When loading paper in portrait orientation: Width 210.0 to 297.0 mm; Length...

 6-5 
Optional Accessories
 6 
Optional Accessories Network Board 
The network board fits inside the printer and is compatible with the TCP/IP protocol 
for connecting the printer to LAN. The network board enables the operation of the 
printer using a built-in web browser Remote UI allowing you to specify settings 
and manage the printer from a computer on the network. Also, you can use 
NetSpot Device Installer and NetSpot Console that configure and manage a 
printer connected to a network on a computer....

6-6Paper Feeder
Optional Accessories
6
Paper Feeder
The paper feeder is to be installed at the bottom of the printer unit.
Make sure that all the following items are contained in the package before installing 
the paper feeder. If any item is missing or damaged, please contact your local 
authorized Canon dealer.
WARNING
Be sure to turn the printer OFF, unplug the power plug, and then disconnect all 
the interface cables and power cord from the printer before installing the paper 
feeder. Otherwise, the...

6-7
Optional Accessories
6
Paper Feeder
IMPORTANT
Do not touch the connector (A) or feed roller (B) in the paper feeder. This may result in 
damage to the printer or misfeeds.
NOTE
For details on the procedure for loading paper in the paper feeder, see Chapter 2 
Loading and Outputting Paper.
(B)
(A)
 

6-8
Optional Accessories
6
Paper Feeder
Installation Space
The dimensions of each part, foot positions, and the space required for using the 
printer with the paper feeder installed are indicated in the following figures:
121.6 172.2
93.8184
88.640.6
438.7 32.6
518
406.1
473.1401.1415.7
673.1
200
325
100 100
1228.7
465
718
408.1 86.4 23.5
408.1 86.4 23.5
332211
57.9
332211
57.9(mm)
Front Surface
Tray Extension
Auxiliary Tray
Multi-purpose
 Tray
Sub-output TrayAuxiliary TrayTray Extension
Auxiliary Tray
•...

6-9
Optional Accessories
6
Paper Feeder
 
Moving the Printer
When installing the paper feeder in the printer after installing the printer, move the 
printer to an appropriate location temporarily using the following procedure.
WARNING
Be sure to turn the printer and computer OFF, unplug the power plug, and then 
disconnect all the interface cables from the printer before moving the printer. 
Otherwise, the power cord or interface cables may be damaged, resulting in a 
fire or electrical shock.
CAUTION
Do...

6-10
Optional Accessories
6
Paper Feeder
3Pull out the paper cassette gently until it stops aa a a, then raise 
the front side of the paper cassette and remove it from the 
printer 
bb b b.
IMPORTANT
The paper cassette cannot be pulled out horizontally. If you try to pull it out 
forcefully, this may result in damage to the paper cassette.
a
b
 

6-11
Optional Accessories
6
Paper Feeder
4Move the printer unit from the installation site.
Carry the printer with 2 or more people by holding the center of the lift handles on 
the lower portion of the printer and lifting it up at the same time.
CAUTION
•This printer weighs approximately 19.4 kg without the paper cassette 
installed. The printer must be carried by 2 or more people, and care must 
be taken to avoid hurting your back or other portions of your body when 
carrying the printer.
 

6-12
Optional Accessories
6
Paper Feeder•
Be sure not to hold the printer by the front or rear side or any portions 
other than the lift handles. If you do so, you may drop the printer, resulting 
in personal injury.
 

6-13
Optional Accessories
6
Paper Feeder •
The back portion (A) of the printer is relatively heavy. Be careful not to get 
off-balanced when lifting the printer. If you do so, you may drop the printer, 
resulting in personal injury.
IMPORTANT
Make sure that the front cover and sub-output tray are closed before carrying the 
printer.
Removing the Packing Materials and Installing the Paper 
Feeder
The paper feeder is to be installed at the bottom of the printer unit.
CAUTION
•Put the printer or paper...