Canon Laser Shot Lbp3500 User Guide

6-14
Optional Accessories
6
Paper Feeder
1Remove the tape that is securing the paper cassette.
2Pull out the paper cassette from the paper feeder.
Pull out the paper cassette until it stops a.
a
 

6-15
Optional Accessories
6
Paper Feeder
Hold the grips (A) with both hands, raise the front side of the paper cassette 
slightly b, and then pull it out completely c as shown in the figure.
IMPORTANT
•Hold the paper cassette with both hands securely because the cassette is heavy.
•Place the removed paper cassette on a flat and stable surface.
•The paper cassette cannot be pulled out horizontally. If you try to pull it out 
forcefully, this may result in damage to the paper cassette.
3While holding the...

6-16
Optional Accessories
6
Paper Feeder
4Remove the tape and packing material.
Remove the tape shown in the figure a.
Remove the packing material with tape b.
a
b
 

6-17
Optional Accessories
6
Paper Feeder
5Place the paper feeder at the installation site.
When carrying the paper feeder, hold the center of the lift handles on both sides 
with both hands.
IMPORTANT
•Do not touch the connector (A) or feed roller (B) in the paper feeder. This may 
result in damage to the printer or misfeeds.
•Do not install the paper feeder on a platform that may warp from the weight of the 
printer and optional accessories, or where the printer is liable to sink (such as a 
carpet or...

6-18
Optional Accessories
6
Paper Feeder
6When installing the printer unit on the paper feeder, gently set 
it down so that each surface of the printer unit is flush with 
the front or side surfaces of the paper feeder.
Also, match the positioning pins (A) and connector (B) when setting the printer 
unit.
IMPORTANT
If the printer unit cannot be placed on the paper feeder properly, lift the printer 
once, hold it horizontally, and place it again. If you try to set the printer forcefully 
without lifting...

6-19
Optional Accessories
6
Paper Feeder
7Attach the cassette protective cover.
IMPORTANT
Do not put your hand or things on the cassette protective cover, or shove the cover 
hard. This may damage the cassette protective cover.
8Set the paper cassette in the printer unit and paper feeder.
NOTE
If the optional duplex unit was previously installed, reinstall it on the printer. For 
details on the procedure for installing the duplex unit, see Installing the Duplex 
Unit, on p. 6-25.
b
a
 

6-20
Optional Accessories
6
Paper Feeder
9Connect the interface cables except for the USB cable, and 
connect the power cord.
10Plug the power plug into the AC power outlet.
11Connect the USB cable.
IMPORTANT
Be sure to turn the printer ON once when loading paper in the paper cassette for 
the first time after installing the paper feeder.
NOTE
After installing the paper feeder, you have to specify the settings for the optional 
accessories in the [Configuration]/[Device Settings] sheet in the printer...

6-21
Optional Accessories
6
Paper Feeder •
Do not carry the printer with the paper feeder installed. If you do so, the paper 
feeder may drop resulting in personal injury.
IMPORTANT
When moving or servicing the printer, remove the paper feeder and paper cassette.
1Turn the printer and computer OFF, remove the USB cable, 
and then disconnect the power plug from the AC power outlet.
2Remove all the interface cables and the power cord from the 
printer.
NOTE
If the optional duplex unit is installed, remove...

6-22
Optional Accessories
6
Paper Feeder
7Move back the printer unit to the installation site.
8Set the paper cassette in the printer.
NOTE
If the optional duplex unit was previously installed, reinstall it on the printer. For 
details on the procedure for installing the duplex unit, see Installing the Duplex 
Unit, on p. 6-25.
9Connect the interface cables except for the USB cable, and 
connect the power cord.
10Plug the power plug into the AC power outlet.
11Connect the USB cable.
 

6-23Duplex Unit
6
Optional Accessories
Duplex Unit
The duplex unit is to be installed on the rear of the printer unit.
WARNING
Be sure to turn the printer OFF, unplug the power plug, and then disconnect all 
the interface cables and power cord from the printer before installing the duplex 
unit. Otherwise, the power cord or interface cables may be damaged, resulting 
in a fire or electrical shock.
Duplex Unit DU-67