Canon Laser Shot Lbp3500 User Guide

5-20
Routine Maintenance
5
Adjusting the Printing Position
4Click [OK].
The Printing Position Adjustment Print is printed as shown in the following. The 
printed arrow is the top edge of the Printing Position Adjustment Print.
Next, check the printout results and specify the position to be adjusted in Adjusting the 
Printing Position (See p. 5-20).
 
Adjusting the Printing Position
Next, check the printout results of the Printing Position Adjustment Print and specify 
the direction and position to be...

5-21
Routine Maintenance
5
Adjusting the Printing Position
This section describes the setting procedure for the following Printing Position 
Adjustment Print printed with [Paper Source] in the [Printing Position Adjustment 
Print] dialog box set to [Cassette 1], as an example.
In this case, adjust the printing position by -2.59 mm to the left.
1Display the Printer Status Window.
For details on methods for displaying the Printer Status Window, see Displaying 
the Printer Status Window, on p. 4-87.
2From...

5-22
Routine Maintenance
5
Adjusting the Printing Position
3Select the printing position from the list in the [Printing 
Position Adjustment] dialog box.
Next, check the printout results of the Printing Position Adjustment Print and 
select the numerical value to adjust the position. Negative values move the 
position to the left and positive values to the right by the selected value.
IMPORTANT
The default values are specified as follows.
-Multi-purpose tray: 0.52 mm
-Cassette 1 and 2: 0.69 mm
-Duplex...

5-23
Routine Maintenance
5
Adjusting the Printing Position
5From the [Options] menu, select [Utility] ➞ [Printing Position 
Adjustment Print].
The [Printing Position Adjustment Print] dialog box is displayed.
6Select the paper source of which you changed the printing 
position in the [Printing Position Adjustment Print] dialog box.
 

5-24
Routine Maintenance
5
Adjusting the Printing Position
7Click [OK].
The Printing Position Adjustment Print in which the setting is changed is printed. 
Check the printout results to confirm the printing position.
To make further adjustment, repeat step 1 to 7.
 

5-25Cleaning the Outside of the Printer
Routine Maintenance
5
Cleaning the Outside of the Printer
Periodically clean the outer surfaces and ventilation slots of the printer to maintain 
the optimal printing quality. When cleaning the printer, be careful of the following 
points in order to prevent an electrical shock or printer malfunctions.
WARNING
•When cleaning the printer, turn OFF the main power switch, and then unplug the 
power plug. Failure to observe these steps may result in a fire or electrical...

5-26
Routine Maintenance
5
Cleaning the Outside of the Printer
1Turn the printer and computer OFF aa a a, remove the USB cable 
bb b b, and then disconnect the power plug from the AC power 
outlet 
cc c c.
2Firmly wring a soft cloth dampened with water or a mild 
detergent diluted with water, and wipe off the dirt.
If you use a mild detergent for cleaning, be sure to wipe away the detergent with 
a soft cloth dampened with water.
c
ab
a
 

5-27
Routine Maintenance
5
Cleaning the Outside of the Printer
3After wiping off the dirt, wipe the printer with a dry cloth.
4When the printer is completely dry, plug the power plug into 
the AC power outlet, and then connect the USB cable.
 

5-28Moving the Printer
Routine Maintenance
5
Moving the Printer
When changing the location of the printer or moving the printer for maintenance, be 
sure to perform the following procedure.
IMPORTANT
Make sure that the front cover and sub-output tray are closed before carrying the printer.
NOTE
For details on the installation site, see Getting Started Guide.
1Turn the printer and computer OFF aa a a, remove the USB cable 
bb b b, and then disconnect the power plug from the AC power 
outlet 
cc c c....

5-29
Routine Maintenance
5
Moving the Printer
2Remove all the interface cables and the power cord from the 
printer.
NOTE
If the optional duplex unit is installed, remove it from the printer. For details on the 
procedure for removing the duplex unit, see Removing the Duplex Unit, on p. 
6-28.
3Pull out the paper cassette gently until it stops aa a a, then raise 
the front side of the paper cassette and remove it from the 
printer 
bb b b.
IMPORTANT
The paper cassette cannot be pulled out horizontally....