Canon Laser Shot Lbp3500 User Guide

5-10
Routine Maintenance
5
Replacing the Toner Cartridge•
When pulling out the sealing tape, be careful not to touch the toner cartridge 
memory (A) or not to hold the drum protective shutter (B) with your hands.
8Hold the toner cartridge properly with the arrowed side facing 
up as shown in the figure.
IMPORTANT
Do not hold the toner cartridge in a manner that is not directed in this procedure.
(A)
(B)
 

5-11
Routine Maintenance
5
Replacing the Toner Cartridge
9Hold the toner cartridge with both hands and install it into the 
printer.
Align (A) of the toner cartridge with the toner cartridge guides (B), then insert the 
cartridge until it stops.
10Close the front cover.
Close the front cover completely.
IMPORTANT
•Make sure that the front cover does not open (make sure that there is no space 
between the front cover and the printer and that the front cover is stable). If the 
front cover is not closed...

5-12
Routine Maintenance
5
Replacing the Toner Cartridge
 
Precautions for Handling Toner Cartridge
The toner cartridge consists of light-sensitive components and intricate mechanical 
components. Handling the toner cartridge without due care may lead to damage to 
the toner cartridge or deterioration in print quality. Be careful of the following points 
when removing or installing the toner cartridge.
WARNING
Do not throw a used toner cartridge into open flames, as this may cause the 
toner remaining...

5-13
Routine Maintenance
5
Replacing the Toner Cartridge •
Be careful not to hold or touch areas that are not specified in this procedure, such as the 
electrical contacts (C). This may result in damage to the cartridge.
•When handling the toner cartridge, hold it properly as shown in the figure and handle it 
with the arrowed side facing up. Do not place it vertically or upside-down.
•Do not attempt to disassemble or modify the toner cartridge.
•Condensation may form in and on the toner cartridge if it is...

5-14
Routine Maintenance
5
Replacing the Toner Cartridge
 
Storing Toner Cartridges
Be careful of the following points when storing a new toner cartridge or handling a 
toner cartridge that has been taken out of the printer for maintenance or moving the 
printer.
IMPORTANT
•Do not take a new toner cartridge out of the protective bag until it is ready to be used.
•When you take the toner cartridge out of the printer for servicing the printer or other 
purposes, place the toner cartridge into the original...

5-15Cleaning the Fixing Roller
Routine Maintenance
5
Cleaning the Fixing Roller
When the front or back of the printed paper has smudge marks, clean the fixing 
roller using the following procedure. Print quality deterioration can be prevented by 
cleaning the fixing roller.
1Load A4-size paper in the multi-purpose tray or paper 
cassette.
2Display the Printer Status Window.
For details on methods for displaying the Printer Status Window, see Displaying 
the Printer Status Window, on p. 4-87.
3From the...

5-16
Routine Maintenance
5
Cleaning the Fixing Roller
4Click [OK].
The cleaning page is printed.
5Load the cleaning page in the multi-purpose tray with the 
printed side facing down.
The paper is fed into the printer slowly, and the printer starts cleaning the fixing 
roller.
 

5-17
Routine Maintenance
5
Cleaning the Fixing Roller
NOTE
•Cleaning takes approximately 75 seconds.
•The cleaning process cannot be canceled. Please wait until it is completed.
•If front or back of the printed paper has smudge marks even after cleaning the 
fixing roller using the cleaning page, load A4 size blank paper rather than the 
printed cleaning page, and then perform the cleaning again.
 

5-18Adjusting the Printing Position
Routine Maintenance
5
Adjusting the Printing Position
If the printing position is skewed when printing from a certain paper source, you can 
adjust the position from the Printer Status Window.
IMPORTANT
If any part of the print image lies outside the printable area after adjusting the printing 
position, the part will be missing in the print result.
NOTE
Be aware that, when adjusting the printing position for 2-sided printing, the orientation of 
the images on the...

5-19
Routine Maintenance
5
Adjusting the Printing Position
2From the [Options] menu, select [Utility] ➞ [Printing Position 
Adjustment Print].
The [Printing Position Adjustment Print] dialog box is displayed.
3Select the paper source of which you want to check the 
printing position in the [Printing Position Adjustment Print] 
dialog box.
Select the [Check Duplex Unit Also] check box when adjusting the printing 
position for 2-sided printing.