Home > Canon > Printer > Canon Imageprograf Ipf815 Mfp M40 User Guide

Canon Imageprograf Ipf815 Mfp M40 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Imageprograf Ipf815 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 960
    							First Level
    Second
    Level Third Lev-
    el Fourth
    Level Fifth Level Sixth Level Seventh
    Level Eighth Level Adjust
    Printer
    Manual
    Band Adj
    No
    Yes Adjust
    Length
    (*3
    →P.720
    ) A:High No
    Yes B:Stand-
    ard/Draft
    No
    Yes Head Inc.
    Adj.
    No
    Yes Interface
    Setup
    (*15
    →P.721
    ) EOP Tim-
    er
    (*15
    →P.721
    ) 10 sec.
    30 sec.
    1 min.
    2 min.
    5 min.
    10 min. *
    30 min.
    60 min. TCP/IP
    (*15
    →P.721
    ) IP Mode
    (*15
    →P.721
    ) Automatic
    Manual * Protocol
    (*4
    →P.720
    )
    (*15 →P.721
    ) DHCP
    (*15
    →P.721
    ) On
    Off * BOOTP
    (*15
    →P.721
    ) On
    Off * RARP
    (*15
    →P.721
    ) On
    Off * IP Setting
    (*12
    →P.721
    )
    (*16 →P.721
    ) IP Ad-
    dress
    0.0.0.0–255.255.255.255
    Subnet
    Mask 0.0.0.0–255.255.255.255
    Default G/
    W 0.0.0.0–255.255.255.255 NetWare
    (*15
    →P.721
    ) NetWare
    (*15
    →P.721
    ) On
    Off * Printer Parts > Control Panel >
    iPF815
    Menu Structure 9
    715
     
    						
    							First Level
    Second
    Level Third Lev-
    el Fourth
    Level Fifth Level Sixth Level Seventh
    Level Eighth Level Interface
    Setup
    (*15
    →P.721
    ) NetWare
    (*15
    →P.721
    ) Frame
    Type
    (*6
    →P.721
    )
    (*15 →P.721
    ) Auto Detect
    Ethernet 2
    Ethernet 802.2 *
    Ethernet 802.3
    Ethernet SNAP Print
    Service
    (*6
    →P.721
    )
    (*15 →P.721
    ) BinderyPServer
    RPrinter
    NDSPServer *
    NPrinter AppleTalk
    (*15
    →P.721
    ) On
    Off * Ethernet
    Driver
    (*15
    →P.721
    ) Auto De-
    tect
    (*15
    →P.721
    ) On *
    Off Comm.Mo
    de
    (*7
    →P.721
    )
    (*15 →P.721
    ) Half Duplex *
    Full Duplex Ethernet
    Type
    (*7
    →P.721
    )
    (*15 →P.721
    ) 10 Base-T *
    100 Base-TX Spanning
    Tree
    (*15
    →P.721
    ) Not Use
     *
    Use
    MAC Ad-
    dress
    (*15 →P.721
    ) 000085XXXXXXPrinter Parts > Control Panel >
    Menu Structure
    iPF8159
    716
     
    						
    							First Level
    Second
    Level Third Lev-
    el Fourth
    Level Fifth Level Sixth Level Seventh
    Level Eighth Level Interface
    Setup
    (*15
    →P.721
    ) Return
    Defaults
    (*16
    →P.721
    ) No *
    Yes Mainte-
    nance Repl.
    maint cart
    No
    Yes Replace
    P.head
    No
    Yes Repl. S.
    Cleaner
    No
    Yes Move
    Printer
    Level 1 *
    Level 2
    Level 3 System
    Setup Warning Buzzer Off
    On * Detect
    Mismatch
    Pause
    Warning
    None * Skip
    Take-Up
    Err
    (*9
    →P.721
    ) Off *
    On Keep Pa-
    per Size
    Off *
    On Paper Size
    Basis Sht Selec-
    tion 1
    ISO A3+ *
    13"x19"(Super B) Sht Selec-
    tion 2
    ISO B1
    28"x40" (ANSI F) TrimEdge
    Reload
    Automatic
    Off *
    On Noz.
    Check
    Freq.
    Off
    1 page
    10 pages
    Automatic * Carria-
    geS-
    canWdth
    Automatic *
    Fixed Printer Parts > Control Panel >
    iPF815
    Menu Structure 9
    717
     
    						
    							First Level
    Second
    Level Third Lev-
    el Fourth
    Level Fifth Level Sixth Level Seventh
    Level Eighth Level System
    Setup
    Sleep Tim-
    er
    (*17
    →P.721
    ) 5 min. *
    10 min.
    15 min.
    20 min.
    30 min.
    40 min.
    50 min.
    60 min.
    240 min. Length
    Unit
    meter *
    feet/inch Time Zone
    (*15
    →P.721
    ) 0:London (GMT)
    +1:Paris,Rome
    +2:Athens,Cairo
    +3:Moscow
    +4:Eerevan,Baku
    +5:Islamabad
    +6:Dacca
    +7:Bangkok
    +8:Hong Kong
    +9:Tokyo,Seoul
    +10:Canberra
    +11NewCaledonia
    +12:Wellington
    -12:Eniwetok
    -11:Midway is.
    -10Hawaii(AHST)
    -9:Alaska(AKST)
    -8:Oregon (PST)
    -7:Arizona(MST)
    -6:Texas (CST)
    -5:NewYork(EST)
    -4:Santiago
    -3:Buenos Aires
    -2:
    -1:Cape Verde Printer Parts > Control Panel >
    Menu Structure
    iPF8159
    718
     
    						
    							First Level
    Second
    Level Third Lev-
    el Fourth
    Level Fifth Level Sixth Level Seventh
    Level Eighth Level System
    Setup
    Date For-
    mat
    (*15
    →P.721
    ) yyyy/mm/dd *
    dd/mm/yyyy
    mm/dd/yyyy Date &
    Time
    (*15
    →P.721
    ) Date yyyy/mm/dd (*8 →P.721
    )
    Time hh:mm Language
    *
    Contrast
    Adj.
    –4,–3,–2,–1,0*,+1,+2,+3,+4 Reset
    Papr-
    Setngs
    (*15
    →P.721
    ) No
    Yes Erase
    HDD Data High
    Speed
    (*15
    →P.721
    ) No
    Yes Secure
    High Spd.
    (*15
    →P.721
    ) No
    Yes Secure
    (*15
    →P.721
    ) No
    Yes Output
    Method
    Print *
    Print (Auto Del) Printer Parts > Control Panel >
    iPF815
    Menu Structure 9
    719
     
    						
    							First Level
    Second
    Level Third Lev-
    el Fourth
    Level Fifth Level Sixth Level Seventh
    Level Eighth Level System
    Setup Output
    Method
    Save: Box XX Save and
    Print
    Off *
    On Save:
    Shared
    Box
    (*15
    →P.721
    ) Off
    On * Show Job
    Log
    (*15
    →P.721
    ) Off
    On *
    Admin.
    Menu
    (*15 →P.721
    ) Change Password (*16 →P.721
    )
    Init.Admin.Pswd (*16 →P.721
    ) Test Print Status
    Print
    No
    Yes Paper De-
    tails
    No
    Yes Print Job
    Log
    No
    Yes Menu
    Map
    No
    Yes Nozzle
    Check
    No
    Yes Color Pa-
    lette
    No
    Yes Informa-
    tion
    System Info Error Log
    1:xxxxxxxx-xxxx
    2:xxxxxxxx-xxxx *1:  Available only if a roll is loaded.
    *2:  Available only if 
    ManageRemainRoll is On.
    *3:  Available if  Feed Priority is Automatic or Print Length .
    *4:  Not displayed if  IP Mode is Manual.
    *5:  For information on the types of paper the printer supports, refer to the Paper Reference Guide.   (See "Types of
    Paper.") →P.617
     The paper type setting in the printer driver and related software (as well as on the Control
    Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change paper
    information by using the Media Configuration Tool.See the  Media Configuration Tool →P.406
     or Media
    Configuration Tool →P.539
    .
    Printer Parts > Control Panel >
    Menu Structure
    iPF8159
    720
     
    						
    							*6:  Not displayed if 
    NetWare is Off.
    *7:  Not displayed if  Auto Detect is On.
    *8:  Follows the setting in  Date Format.
    *9:  Displayed if the Media Take-up Unit is attached.
    *10:  Available after you have used  Advanced Adj. in Auto Head Adj.  once.
    *11:  Available if: (a)  Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed  Auto Feed
    for the loaded roll.
    *12:  Not displayed if  IP Mode is Automatic.
    *13:  Follows the setting in  Length Unit.
    *14:  Leading edge  is not available as a setting option in the  Paper Detailed Settings dialog box of the printer driv-
    er.
    *15:  Viewing and configuration is possible for administrators, and only viewing for other users.
    *16:  Viewing and configuration is possible for administrators only.
    *17:  Default setting for the time to enter the power save mode/Sleep mode is recommended. Caution
    • Only the following menus are displayed during printing.
    Choose this menu to display  Head Cleaning, Fine Band Adj., and Information.
    Choose this menu to display  Job Management.Submenus
    Each time you press the 
    Information button on the Control Panel, printer information is displayed in the following order.
    • The remaining Maintenance Cartridge capacity and ink levels •
    Information on the loaded paper Printer Parts > Control Panel >
    iPF815
    Menu Structure 9
    721
     
    						
    							•
    Printer information •
    HP-GL/2 settings information For details on submenu screens, 
    see "Submenu Display." →P.735
    Main menu during printing
    The structure of the main menu during printing is as follows.
    For instructions on menu operations, 
    see "Main Menu Operations." →P.705
    For details on menu items available during printing,  see "Main Menu Settings (During Printing)." →P.734
    First Level Second Level Third Level Fourth Level
    Menu Durng Prtng Head Cleaning *
    Head Cleaning A *
    Head Cleaning B
    Fine Band Adj. From –5 to 5 Information System Info
    Error Log
    1:xxxxxxxx-xxxx
    2:xxxxxxxx-xxxxMain Menu Settings
    Main menu items are described in the following tables.
    For instructions on selecting or setting menu items, 
    see "Main Menu Operations ." →P.705
    .
    For details on menu levels and values,  see "Menu Structure." →P.709
    Setting Item
    Description, Instructions
    Paper Cutting This command is available only if a roll is loaded.
    Choose Yes to cut the roll at the current position. However, if paper cannot be advanced
    to the cut position, it will not be cut. In this case, manually advance the roll before cutting
    it.  (See "Feeding Roll Paper Manually .") →P.638
    Rep. Ink Tank When replacing ink tanks, choose  Yes and follow the instructions on the screen.   (See
    "Replacing Ink Tanks .") →P.803Printer Parts > Control Panel >
    Main Menu Settings
    iPF8159
    722
     
    						
    							Setting Item
    Description, Instructions
    Head Cleaning Clean the Printhead.  (See "Cleaning the Printhead .") →P.819
    Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substan-
    ces.
    Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by
    Head Cleaning A.
    Auto Feed This command is available only if  Take-up Reel is set to Enable. Choose Yes to ad-
    vance roll paper automatically on the Rewind Spool, up to the fastening position.
    Take-up Reel Choose Enable to use the Media Take-up Unit.
    Paper Menu Specify the type and size of paper.   (See "  Paper Menu .") →P.724
    Paper Details Specify detailed paper-related settings, including the ink drying time and borderless print-
    ing options.  (See " Paper Details .") →P.724
    Job Management Manage print jobs on the printer's hard disk.   (See " Job Management .") →P.726
    GL2 Settings Specify settings for HP-GL/2 printing.   (See " GL2 Settings .") →P.727
    Adjust Printer Adjust the Printhead alignment or amount of feed by printing a test pattern.   (See " Adjust
    Printer .") →P.729
    Interface Setup Configure the EOP timer and network settings.   (See " Interface Setup .") →P.730
    Maintenance Access maintenance settings when replacing the Printhead or preparing to move the print-
    er.  (See " Maintenance .") →P.731
    System Setup Specify the printer system settings, including the date format and display language.   (See
    "  
    
    System Setup .") →P.732
    Admin. Menu
    Change PasswordBy setting a password, you can restrict menu display and
    configuration as follows. You can input between 0 and
    9999999.
    • Viewing 
    
    and  configuration  by  administrators
    only
    IP Setting
    Return Defaults
    Change Password
    Init.Admin.Pswd
    • Viewing  and  configuration  by  administrators,
    and only viewing by other users
    Interface  Setup  settings  (except  IP  Setting, Return
    Defaults )
    Time Zone
    Date Format
    Date & Time
    Reset PaprSetngs
    High Speed
    Secure High Spd.
    Secure
    Save: Shared Box
    Show Job Log
    Admin. Menu
    Init.Admin.Pswd Choose OK to restore the Admin. Menu password to the
    default values.
    Test Print Choose Status Print to print information about the printer. Printer Parts 
    > Control Panel >
    iPF815
    Main Menu Settings 9
    723
     
    						
    							Setting Item
    Description, Instructions
    Test Print Choose Paper Details to print the paper settings as specified in  Paper Details.
    Choose Print Job Log to print a record of print jobs, including the paper type and size,
    amount of ink used, and so on. (Information on ink consumption is general, not specific
    in nature.)
    Choose Menu Map to print a list of the main menu options.
    Choose Nozzle Check to print a test pattern for checking the nozzles.
    Select  Color Palette to print the GL2 color palette.
    Information Displays printer information and an error log.   (See " Information .") →P.734
    Paper Menu
    Setting Item
    Description, Instructions
    Cut Sheet Type (*1 →P.724
    ) Choose the type of sheets.
     (See "Selecting the Paper Type (Sheet) .") →P.650
    Roll Media Type ( *1 →P.724
    ) Choose the type of roll.
     (See "Selecting the Paper Type (Roll) .") →P.632
    Roll Length Set Displayed if ManageRemainRoll is On.
    If a barcode is not printed on rolls, specify the roll length.
    The roll length is displayed in meters or feet, depending
    on the setting in  Length Unit.
    ManageRemainRoll Choose On to print a barcode at the end of a roll before
    you remove it. The printed barcode can be used in manag-
    ing the amount of roll paper left. Choose Off if you prefer
    not to print the barcode.  (See "Keeping Track of the Amount of Roll Paper
    Left.") →P.639
    *1:  For information on the types of paper the printer supports, refer to the Paper Reference Guide. 
     (See "Types of
    Paper.") →P.617
     The types of paper indicated in the printer driver and related software (as well as on the
    Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if you up-
    date paper information by using the Media Configuration Tool. See  Media Configuration Tool →P.406
     or
    Media Configuration Tool →P.539
    . Paper Details
    Setting Item
    Description, Instructions(The type of paper is dis-
    played here.)
    (*1
    →P.726
    ) Roll DryingTime
    Specify the time to wait for the ink to dry for each sheet.
    Scan Wait Time Specify the time to wait for the ink to dry between each
    scan (after the printhead finishes moving in one direction),
    in consideration of how quickly the ink dries. Also specify
    the applicable area for the ink drying time. Select  Entire
    area to apply the ink drying time after each scan until the
    document is fully printed. Select  Leading edge to apply
    the ink drying time after each scan only in the area 110–
    160 mm from the leading edge. (The applicable length
    varies depending on the  Print Quality setting.) Note that
    printing will take longer if you specify the  Scan Wait
    Time setting. In particular, when  Leading edge is selec-
    ted, colors may be uneven in the boundary between the
    areas with and without a drying time. Printer Parts > Control Panel >
    Main Menu Settings
    iPF8159
    724
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Imageprograf Ipf815 Mfp M40 User Guide