Home > Canon > Printer > Canon Imageprograf Ipf815 Mfp M40 User Guide

Canon Imageprograf Ipf815 Mfp M40 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Imageprograf Ipf815 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 960
    							Note
    • You can input between 25 and 400.
    • You can change the numbers by clicking  ▼ button.Format Dialog Box
    This dialog box appears when you select 
    Format from the Object menu after you select an object.Size Sheet
    You can rotate, enlarge, or reduce an object. Note
    • When the objects are not selected, you can not select  Format. Rotate
    When you place a checkmark here, you can select  Rotate Right or Rotate Left.Setting
    Details
    Rotate Right Rotates the object 90 degrees clockwise.
    Rotate Left Rotates the object 90 degrees counterclockwise.Note
    • When several objects are selected, you cannot select  Rotate.Windows Software > Free Layout >
    iPF815
    Format Dialog Box 4
    265
     
    						
    							Enl./Red.
    When you place a checkmark here, you can select  Scaling, Fit Paper Size, or Fit Photo Size. Setting
    Details
    Scaling Allows you to input the value of the enlargement or reduction ratio of an object.
    Fit Paper Size Prints by enlarging or reducing each object to match the paper size. If you are using
    roll paper, objects are enlarged or reduced so that the width of each object matches
    the width of the roll paper.
    Fit Photo Size Prints all of the objects at the specified photo size.Note
    • You can input between 25 and 600.
    • You can change the numbers by clicking either  ▲ button or ▼ button. Position
     Sheet
    You can rotate, enlarge, or reduce an object. Note
    • When the objects are not selected, you can not select  Format. Object Position
    You can move the object position by changing the values. Setting
    Details
    Vertical Pos You can input the number of the vertical position in numerical characters.
    Horizontal Pos You can input the number of the horizontal position in numerical characters.Windows Software > Free Layout >
    Format Dialog Box
    iPF8154
    266
     
    						
    							Setting
    Details
    Page Pos You can input the number of the page position in numerical characters.Object Size
    You can confirm the object size. Note
    • When several objects are selected, you cannot display  Object Size. Laying out a Multiple-File Document on One Page
    You can lay out and print a multiple-file document on one page.
    1. From the application software's  File menu, select the printer setup menu to open the  Print dialog box. Note
    • Normally, select  Print from the File menu.
    2. Click  Properties to open the  Properties dialog box. Windows Software > Free Layout >
    iPF815
    Laying out a Multiple-File Document on One Page 4
    267
     
    						
    							3.
    In the  Page Setup sheet, select Paper Source .Note
    • Your printer is depicted in the lower-left area of this screen.
    4. In the  Layout  sheet, click on the  Page Layout check box and select Free Layout from the list.Windows Software > Free Layout >
    Laying out a Multiple-File Document on One Page
    iPF8154
    268
     
    						
    							Note
    • Your printer is depicted in the lower-left area of this screen.
    • When you select Free Layout, all other setting items will be disabled.
    5. Click the  OK button to save the settings.
    6. In the Print dialog box, select the pages to print and the number of copies, and click the  OK button.Free Layout starts, laying out the document created with application software in the layout area as an object. Windows Software > Free Layout >
    iPF815
    Laying out a Multiple-File Document on One Page 4
    269
     
    						
    							7.
    Leaving Free Layout running, open other files with the application software and repeat the above steps. Laying out a Document Created with Multiple Application Programs on One Page
    You can lay out and print a document created with multiple application programs on one page.
    1. From the application software's  File menu, select the printer setup menu to open the  Print dialog box.Note
    • Normally, select  Print from the File menu.
    2. Click  Properties to open the  Properties dialog box. Windows Software > Free Layout >
    Laying out a Document Created with Multiple Application Programs on One Page
    iPF8154
    270
     
    						
    							3.
    In the  Page Setup sheet, select Paper Source .Note
    • Your printer is depicted in the lower-left area of this screen.
    4. In the  Layout  sheet, click on the  Page Layout check box and select Free Layout from the list. Windows Software > Free Layout >
    iPF815
    Laying out a Document Created with Multiple Application Programs on One Page 4
    271
     
    						
    							Note
    • Your printer is depicted in the lower-left area of this screen.
    • When you select Free Layout, all other setting items will be disabled.
    5. Click the  OK button to save the settings.
    6. In the Print dialog box, select the pages to print and the number of copies, and click the  OK button.Free Layout starts, laying out the document created with application software in the layout area as an object.Windows Software > Free Layout >
    Laying out a Document Created with Multiple Application Programs on One Page
    iPF8154
    272
     
    						
    							7.
    Leaving Free Layout running, open other files with other application software and repeat the above steps. Selecting an Object
    When an object is selected, a select box (blue border) appears around the object. Note
    • To select an object, click that object.
    • To select multiple successive objects, click them while holding down the Shift key.
    • To select multiple arbitrary objects, click them while holding down the Ctrl key.
    • To select all objects, select  Select All from the Edit menu.
    • When you specify the area with dragging the mouse, the object in the area is selected. Windows Software > Free Layout >
    iPF815
    Selecting an Object 4
    273
     
    						
    							Changing the Object Size
    You can change the object size by means of mouse operation or by specifying a scaling value. Note
    • The vertical-to-horizontal ratio remains unchanged when the object is enlarged or reduced. Resizing by means of mouse operation
    1. Select an object.
    2. Place 
    the pointer at a corner of the selection box around the object to show the arrow handle, and drag this handle to
    change the object size. Resizing by specifying a scaling value
    1. Select an object.
    Click on the  Enl./Red. checkbox in the  Format Dialog Box →P.265
     and select Scaling .
    2. You either enter numbers directly. Note
    • You can input between 25 and 600.
    • You can change the numbers by clicking either  ▲ button or ▼ button.
    3. Click the  OK button. Moving an Object
    You can move the object position.
    1. Select an object.
    Windows Software 
    > Free Layout >
    Changing the Object Size
    iPF8154
    274
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Imageprograf Ipf815 Mfp M40 User Guide