Canon Imageprograf Ipf815 Mfp M40 User Guide
Have a look at the manual Canon Imageprograf Ipf815 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10. Close the Top Cover. The Printhead is now straight, and adjustment is complete. Troubleshooting Paper Abrasion and Blurry Images (Head Height) If paper rubs against the printer or the edge is wrinkled from rubbing, adjusting the Printhead height may improve results. If image edges are blurred, it may help to lower the Printhead. 1. Press the Menu button to display MAIN MENU. 2. Press ▲ or ▼ to select Paper Details, and then press the ▶ button. 3. Press ▲ or ▼ to select the type of paper, and then press the ▶ button. 4. Press ▲ or ▼ to select Head Height , and then press the ▶ button. 5. Press ▲ or ▼ to select the Printhead height, and then press the OK button. Adjustments for Better Print Quality > Adjusting the Printhead > iPF815 Troubleshooting Paper Abrasion and Blurry Images (Head Height) 8 675
Adjusting the feed amount Adjusting the Feed Amount ............................................................................................................................. 676 Selecting a Feed Amount Adjustment Method (Feed Priority) ....................................................................676 Auto Band Adjustment (Auto Band Adj.) ..................................................................................................... 677 Manual Band Adjustment (Manual Band Adj) ............................................................................................. 678 Banding Adjustment During Printing (Fine Band Adj.) ................................................................................680 Adjusting Line Length (Adjust Length) ........................................................................................................ 681 Adjusting the Vacuum Strength (VacuumStrngth) ........................................................................................... 683Adjusting the Feed Amount If printed documents are affected by the following problems, try adjusting the feed amount. •Banding in different colors • Line length is not accurate in the direction paper is fed To adjust the feed amount, do the following, in this order. 1. Depending on the issue, change the Feed Priority setting for the particular type of paper. (See "Selecting a Feed Amount Adjustment Method (Feed Priority) .") →P.676 2. Based on the Feed Priority setting, use Auto Band Adj. , Manual Band Adj , or Adjust Length . (See " Auto Band Adjustment (Auto Band Adj.).") →P.677 (See " Manual Band Adjustment (Manual Band Adj).") →P.678 (See "Adjusting Line Length (Adjust Length) .") →P.681 3. If additional fine-tuning is necessary after Auto Band Adj. or Manual Band Adj , use Fine Band Adj. in the Menu Durng Prtng . (See "Banding Adjustment During Printing (Fine Band Adj.) .") →P.680 Selecting a Feed Amount Adjustment Method (Feed Priority) Methods of adjusting the amount paper is fed are set for each type of paper, in the Feed Priority setting. Adjust the Feed Priority setting to suit your particular printing application. • Band Joint : Adjusts the feed amount to reduce banding across the sheet in printed documents. The settings of Auto Band Adj. or Manual Band Adj are applied. If you have executed Fine Band Adj., in addition to the settings of Auto Band Adj. or Manual Band Adj, the settings of Fine Band Adj. are also applied. • Print Length : Adjusts the feed amount for better accuracy of lines in printed documents. The settings of A:High or B:Standard/Draft in the Adjust Length menu are applied. • Automatic : Band Joint or Print Length is selected, depending on Print Priority as selected in the printer driver at the time of printing. Image or Office Document : Band Joint is selected. Line Drawing/Text : Print Length is selected. Adjustments for Better Print Quality > Adjusting the feed amount > Adjusting the Feed Amount iPF8158 676
Note • Use Manual Band Adj for transparent media or other paper for which adjustment with Auto Band Adj. is not possible. • Either B:Standard/Draft or A:High in the Adjust Length menu is applied, depending on printer driver set- tings at the time of printing. • If you have selected Easy Settings in the printer driver, follow these steps to confirm the Print Priority setting. • Windows: Click View Settings on the Main tab to display the View Settings dialog box. • Mac OS X: Click View set. on the Main pane to display the View settings dialog box. Follow these steps to change the Feed Priority setting. 1. Press the Menu button to display MAIN MENU. 2. Press ▲ or ▼ to select Paper Details, and then press the ▶ button. 3. Press ▲ or ▼ to select the type of paper, and then press the ▶ button. 4. Press ▲ or ▼ to select Feed Priority, and then press the ▶ button. 5. Press ▲ or ▼ to select Automatic, Band Joint or Print Length and then press the OK button.Auto Band Adjustment (Auto Band Adj.) If printed images are affected by banding in different colors, adjust the amount that paper is fed. Auto Band Adj. offers two modes, Standard Adj. and Advanced Adj. . Use Advanced Adj. if Standard Adj. does not eliminate banding, or when using paper other than genuine Canon paper or paper for purposes other than checking output. Always check the Feed Priority setting before using Auto Band Adj.. (See "Selecting a Feed Amount Adjustment Method (Feed Priority) .") →P.676 Note • When using highly transparent media not compatible with Auto Band Adj., you must adjust the feed amount manually. (See "Manual Band Adjustment (Manual Band Adj) .") →P.678 • If additional fine-tuning is necessary after Auto Band Adj., use Fine Band Adj. . (See " Banding Adjust- ment During Printing (Fine Band Adj.) .") →P.680 • To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed at exactly the right length, for example), specify the amount of paper stretching or shrinkage when adjusting the feed amount. (See "Adjusting Line Length (Adjust Length) .") →P.681 • This may take some time, depending on the type of paper. • Use paper of the same type and size for adjustment as you will use for printing. Adjustments for Better Print Quality > Adjusting the feed amount > iPF815 Auto Band Adjustment (Auto Band Adj.) 8 677
Paper to Prepare Rolls An unused roll at least 10 inches wide Sheets Standard Adj. : One sheet of unused paper of at least A4/Letter size Advanced Adj. : Two sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or larger)Execute Auto Band Adj. as follows. 1. Load paper. •Attaching the Roll Holder to Rolls →P.623 • Loading Rolls in the Printer →P.628 • Loading Sheets in the Printer →P.651 Note • Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be com- pleted correctly unless the setting value matches the loaded paper. 2. Press the Menu button to display MAIN MENU.3. Press ▲ or ▼ to select Adjust Printer, and then press the ▶ button. 4. Press ▲ or ▼ to select Auto Band Adj. , and then press the ▶ button. 5. Press ▲ or ▼ to select Standard Adj. or Advanced Adj. , and then press the ▶ button. 6. Press ▲ or ▼ to select Yes, and then press the OK button. A test pattern is printed for band adjustment. Adjustment is now finished if you have printed on a roll or on sheets of A2 size or larger. 7. If you are printing on sheets smaller than A2 size for Standard Adj., a confirmation message is shown on the Dis- play Screen, requesting you to continue printing. Press the OK button and follow the instructions on the Display Screen. Manual Band Adjustment (Manual Band Adj) If printed images are affected by banding in different colors, adjust the amount that paper is fed. Use Manual Band Adj for transparent media or other paper for which adjustment with Auto Band Adj. is not possible. We recommend automatic adjustment for other types of paper. (See "Auto Band Adjustment (Auto Band Adj.).") →P.677 Always check the Feed Priority setting before using Manual Band Adj. (See "Selecting a Feed Amount Adjustment Method (Feed Priority) .") →P.676 Adjustments for Better Print Quality > Adjusting the feed amount > Manual Band Adjustment (Manual Band Adj) iPF8158 678
Note • If additional fine-tuning is necessary after Manual Band Adj, use Fine Band Adj. . (See " Banding Adjust- ment During Printing (Fine Band Adj.) .") →P.680 • Use paper of the same type and size for adjustment as you will use for printing. Paper to Prepare Rolls An unused roll at least 10 inches wide Sheets Two sheets of unused paper of at least A4/Letter size Execute Manual Band Adj as follows. 1. Load paper. •Attaching the Roll Holder to Rolls →P.623 • Loading Rolls in the Printer →P.628 • Loading Sheets in the Printer →P.651 Note • Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be com- pleted correctly unless the setting value matches the loaded paper. 2. Press the Menu button to display MAIN MENU.3. Press ▲ or ▼ to select Adjust Printer, and then press the ▶ button. 4. Press ▲ or ▼ to select Manual Band Adj , and then press the ▶ button. 5. Press ▲ or ▼ to select Yes, and then press the OK button. Test pattern A is printed for band adjustment. 6. Examine test pattern A for band adjustment. Determine the pattern in which streaks are least noticeable. Adjustments for Better Print Quality > Adjusting the feed amount > iPF815 Manual Band Adjustment (Manual Band Adj) 8 679
Note • If streaks seem least noticeable in two patterns but you cannot decide which one is better, choose an intermediate value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is better. 7. Press ▲ or ▼ to display the number selected in step 6, and then press the OK button. Test pattern B is printed for band adjustment. 8. Examine test pattern B for band adjustment. Determine the pattern in which streaks are least noticeable. 9. Press ▲ or ▼ to display the number selected in step 8, and then press the OK button. The adjustment value is now registered, and adjustment is complete. Banding Adjustment During Printing (Fine Band Adj.) If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears at 50 mm (2 in.) intervals, try adjusting the feed amount as follows. The results of adjustment are applied to printing in progress, enabling you to check the results immediately. However, note that because printing is paused, colors may be slightly different. Use Fine Band Adj. after Auto Band Adj. or Manual Band Adj if finer adjustment is required. (See "Auto Band Adjust- ment (Auto Band Adj.) .") →P.677 (See "Manual Band Adjustment (Manual Band Adj) .") →P.678 Note • The Fine Band Adj. value is reset to 0 if you use Auto Band Adj. or Manual Band Adj . Execute Fine Band Adj. during printing as follows. 1. Press the Online button to pause printing. 2. Press the Menu button to display the menu during printing. (See "Main Menu Settings (During Printing) .")→P.734 3. Press ▲ or ▼ to select Menu Durng Prtng, and then press the OK button. Adjustments for Better Print Quality > Adjusting the feed amount > Banding Adjustment During Printing (Fine Band Adj.) iPF8158 680
4. Press ▲ or ▼ to select Fine Band Adj., and then press the ▶ button. 5. Press ▲ or ▼ to change the value, and then press the OK button.Note • The supported range is –5 to +5. 6. Press the Online button to resume printing.Adjusting Line Length (Adjust Length) Use Adjust Length to ensure that lines in CAD drawings are printed at exactly the right length. In the Adjust Length menu, choose the mode of length adjustment ( A:High or B:Standard/Draft ) that suits your particu- lar printing application. • A:High : This setting is applied when Highest or High is selected in Print Quality in the printer driver. • B:Standard/Draft : This setting is applied when Standard or Draft is selected in Print Quality in the printer driver. Check the Feed Priority setting before using Adjust Length. (See "Selecting a Feed Amount Adjustment Method (Feed Priority) .") →P.676 Note • Use paper of the same type and size for adjustment as you will use for printing. • If you have selected Easy Settings on the printer, follow these steps to confirm the Print Quality setting. • Windows: Click View Settings on the Main tab to display the View Settings dialog box. • Mac OS X: Click View set. on the Main pane to display the View settings dialog box. Paper to Prepare Rolls An unused roll at least 10 inches wide Sheets One sheet of unused paper of at least A4/Letter size Follow these steps to change the Adjust Length setting. 1. Load paper. •Attaching the Roll Holder to Rolls →P.623 • Loading Rolls in the Printer →P.628 • Loading Sheets in the Printer →P.651Adjustments for Better Print Quality > Adjusting the feed amount > iPF815 Adjusting Line Length (Adjust Length) 8 681
Note • Always make sure the loaded paper matches the type of paper specified in the settings. Adjustment cannot be completed correctly unless the loaded paper matches the settings. 2. Press the Menu button to display MAIN MENU.3. Press ▲ or ▼ to select Adjust Printer, and then press the ▶ button. 4. Press ▲ or ▼ to select Adjust Length , and then press the ▶ button. 5. Press ▲ or ▼ to select A:High or B:Standard/Draft , and then press the ▶ button. 6. Press ▲ or ▼ to select Yes, and then press the OK button. A test pattern is printed for adjustment based on the amount of paper stretching or shrinkage. The scale bar shows Millimeter in 50 mm units and Inch in 1 inch units. Note • A test pattern is printed in black when you choose A:High or in magenta if you choose B:Standard/ Draft. • To cancel printing the test pattern for adjustment, hold down the Stop button for a second or more, and then go to step 7. 7. Measure the length of the adjustment pattern. Calculate the difference between the measured length and actual length. Enter it as a percentage and press the OK button. You can adjust the value in 0.02% increments. Press ▲ to increase the value or ▼ to decrease it. If the scale is printed shorter than actual size, set the value toward the positive side; if it is printed longer, set the value toward the negative side. Note • You can also specify the adjustment value in Adjust Length in the Paper Details menu. In this case, no test pattern for adjustment is printed. Adjustments for Better Print Quality > Adjusting the feed amount > Adjusting Line Length (Adjust Length) iPF8158 682
Adjusting the Vacuum Strength (VacuumStrngth) When printing on heavyweight paper or paper that curls or wrinkles easily, if paper rubs against the printer or the edge is wrinkled from rubbing, adjusting the level of suction against paper on the Platen may improve results. 1. Press the Menu button to display MAIN MENU. 2. Press ▲ or ▼ to select Paper Details, and then press the ▶ button. 3. Press ▲ or ▼ to select the type of paper, and then press the ▶ button. 4. Press ▲ or ▼ to select VacuumStrngth, and then press the ▶ button. 5. Press ▲ or ▼ to select the level of suction against paper on the Platen, and then press the OK button. Adjustments for Better Print Quality > Adjusting the feed amount > iPF815 Adjusting the Vacuum Strength (VacuumStrngth) 8 683
Printer Parts Printer parts 685Control Panel 692Hard Disk 746Optional accessories 752Printer Specifications 765Printer Parts > iPF8159 684