Canon Imageprograf Ipf815 Mfp M40 User Guide
Have a look at the manual Canon Imageprograf Ipf815 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
• Display of printer-related information Job Mgmt Menu •Job management menu operations For a description of specific items available in the main menu during printing, see "Main Menu Settings (During Print- ing)." →P.734 For instructions on selecting and setting main menu items during printing, see "Main Menu Operations." →P.705 Submenu operations Access submenus by pressing the Information button on the Control Panel. You can check the following information in submenus. •Remaining Maintenance Cartridge capacity • Ink levels • Information on the loaded paper • Printer information • HP-GL/2 setting information For a description of specific items displayed in submenus, see "Submenu Display." →P.735 Main Menu Operations Press the Menu button to display the main menu. For details, see "Main Menu Settings." →P.722 • Main menu (displayed if you press the Menu button when printing is not in progress)• Menu selection (if you press the Menu button when printing is in progress)Note • The main menu will not be displayed in the following case even if you press the Menu button. • When an error message is displayed You can switch to Menu mode after the problem is solved. Printer Parts > Control Panel > iPF815 Main Menu Operations 9 705
Simply press buttons on the Control Panel to access various function menus from the main menu and set or execute menu items. The following section describes menu operations and how they are presented in this User Manual. • Accessing menus →P.706 • Specifying menu items →P.707 • Specifying numerical values →P.707 • Executing menu commands →P.708 Accessing menus Printer menus are grouped by function. Menus are displayed with the upper line selected. Use the buttons on the Control Panel to access each menu. • Press ▲ to access a higher level menu on the same screen, and press ▼ to access a lower one. If not all menus can be displayed on the screen at once, press ▲ and ▼ to scroll the menu. Items you select are highlighted. The scroll bar at right indicates the current position in the overall menu. • Lower level menus are available if ▶ is displayed at right. To access these lower level menus, select a menu and press ▶. Printer Parts > Control Panel > Main Menu Operations iPF8159 706
• Upper level menus are available if ◀ is displayed at left in the top line. To access these upper level menus, press ◀.Specifying menu items Follow these steps to specify menu items. 1. Press ▲ or ▼ to select a menu, and then press the ▶ button. Repeat these steps until the desired menu options are displayed. 2. Press ▲ or ▼ to select a setting item to complete, and then press the OK button. The check box at left is selected, and the setting is confirmed. After two seconds, the display reverts to the upper level menu. 3. Press the Online button to bring the printer online. Note • If a confirmation message is displayed regarding the setting you entered, press the OK button. The setting is applied, and the printer goes online. Specifying numerical values Follow these steps to enter numbers. In this example, network settings items are entered. 1. Press ▲ or ▼ to select Interface Setup, and then press the ▶ button. Printer Parts > Control Panel > iPF815 Main Menu Operations 9 707
2. Press ▲ or ▼ to select TCP/IP, and then press the ▶ button. 3. Press ▲ or ▼ to select IP Setting, and then press the ▶ button. 4. Press ▲ or ▼ to select IP Address, and then press the ▶ button. 5. Press ◀ or ▶ to move the cursor (_) to each field for entering numbers. 6. Press ▲ or ▼ to enter the number, and then press the OK button.Note • Hold down ▲ or ▼ to increase or decrease the value continuously. • Make sure the IP address you enter for the printer is not the same as any computer IP address in your network. 7. Repeat steps 5 and 6 to continue entering numbers. 8. Press the Online button to bring the printer online. Note • If a confirmation message is displayed regarding the setting you entered, press the OK button. The setting is applied, and the printer goes online. Executing menu commands Follow these steps to execute menu commands. 1. Press ▲ or ▼ to select a menu, and then press the ▶ button. Repeat these steps until the desired menu options are displayed. Printer Parts > Control Panel > Main Menu Operations iPF8159 708
2. Press ▲ or ▼ to select a setting item to execute, and then press the OK button.After two seconds, the menu command is executed. After commands are executed, in most cases the printer reverts to the state before the menu operation, either online or offline. Menu Structure Main Menu The structure of the main menu is as follows. Values at right indicated by an asterisk * are the defaults. For instructions on menu operations, see "Main Menu Operations." →P.705 For details on menu items, see "Main Menu Settings." →P.722 . First Level Second Level Third Lev- el Fourth Level Fifth Level Sixth Level Seventh Level Eighth Level Paper Cutting (*1 →P.720 ) No * Yes Rep. Ink Tank No * Yes Head Cleaning Head Cleaning A * Head Cleaning B Auto Feed (*11 →P.721 ) No * Yes Printer Parts > Control Panel > iPF815 Menu Structure 9 709
First Level Second Level Third Lev- el Fourth Level Fifth Level Sixth Level Seventh Level Eighth Level Take-up Reel (*9 →P.721 ) Disable * Enable Paper Menu Cut Sheet Type(The paper type is displayed here.) ( *5 →P.720 ) Roll Me- dia Type (*1 →P.720 ) (The paper type is displayed here.) ( *5 →P.720 ) Roll Length Set (*1 →P.720 ), (*2 →P.720 ) ##.# m ### feet (*13 →P.721 ) ManageR- emainRoll Off * On Paper De- tails (The paper type is dis- played here.) (*5 →P.720 ) Roll Dry- ingTime Off 30 sec. 1 min. 3 min. 5 min. 10 min. 30 min. 60 min. Scan Wait Time Dry time Off * 1 sec. 3 sec. 5 sec. 7 sec. 9 sec. Area (*14 →P.721 ) Entire area * Leading edge Feed Pri- ority Automatic * Band Joint Print LengthPrinter Parts > Control Panel > Menu Structure iPF8159 710
First Level Second Level Third Lev- el Fourth Level Fifth Level Sixth Level Seventh Level Eighth Level Paper De- tails (The paper type is dis- played here.) (*5 →P.720 ) Adjust Length A From –0.70% to 0.70% Adjust Length B From –0.70% to 0.70% Head Height Automatic * Highest High Standard Low Lowest Skew Check Lv. Standard * Loose Off Vac- uumStrng th Automatic * Strongest Strong Standard Weak Weakest Width De- tection Off On * NearEnd RollMrgn 3mm 20mm Cut Speed Fast Standard Slow Trim Edge First Automatic Off On Cutting Mode Automatic Eject Manual Bordless Margin Automatic Fixed CutDus- tReduct. Off On NearEnd Sht Mrgn 3mm 20mm Printer Parts > Control Panel > iPF815 Menu Structure 9 711
First Level Second Level Third Lev- el Fourth Level Fifth Level Sixth Level Seventh Level Eighth Level Paper De- tails (The paper type is dis- played here.) (*5 →P.720 ) Return Defaults No Yes Job Man- agement Print Job Job List (Choose a print job.) Delete Preempt Jobs Stored Job Mailbox List (Enter a password if one has been set.) Job List Print Delete Print Job List No Yes Job Log (Choose from infor- mation about the latest three print jobs.) Document Name User Name Page Count Job Status OK CANCELED Print Start Time yyyy/mm/dd hh:mm Print End Time yyyy/mm/dd hh:mm Print Time xxxsec. Print Size xxxxxxxxsq.mm Media Type Interface USB Network Ink Con- sumed (The total amount of ink con- sumed and ink colors are dis- played here.)xxx.xxx ml HDD In- formation HDDSpace :xx.x GB GL2 Set- tings Quality Manager Color Mode Monochrome Color (CAD) 1 * Color (CAD) 2 Color (CAD) 3 Color (CAD) 4Printer Parts > Control Panel > Menu Structure iPF8159 712
First Level Second Level Third Lev- el Fourth Level Fifth Level Sixth Level Seventh Level Eighth Level GL2 Set- tings Quality Manager Color Mode Color (CAD) 5 Color (CAD) 6 Print Quality Fast Standard * High Input Res- olution 600dpi * 300dpi Print (Econo- my) Off * On Paper Manager Paper Source Automatic * Roll Paper Cut Sheet Margin 3mm(Standard) * 5mm Conserve Paper Off * On Auto Ro- tate Off * On Nesting Use Nest- ing Off * On Nesting WaitTime xx min. Cut Lines Off * On Line & Pen Man- ager Enable merge Off * On Pen Setup Select Pa- lette Software * Palette A Palette B Factory Define Pa- lette Palette A (Select the pen num- ber) Width (Indicates the value of Width ) Color 0~255 Line At- tributes No Setting Circle Setting Printer Parts > Control Panel > iPF815 Menu Structure 9 713
First Level Second Level Third Lev- el Fourth Level Fifth Level Sixth Level Seventh Level Eighth Level GL2 Set- tings Line & Pen Man- ager Pen Setup Define Pa- lette Palette B (Select the pen num- ber)(Indicates Width, Color, and Line At- tributes )(Specify the values of Width, Color, and Line At- tributes ) Factory (Select the pen num- ber)(Indicates Width, Color , and Line Attributes ) Reset Pa- lette All Palette Palette A Palette B Smoothing Software * Smooth Thicken- FineLines Off * On Adjust- FaintLines Off On * Processin- gOption Warning Off * On On-the- Fly Off * On PageSize- Process1 Off * On PageSize- Process2 Off * On Adjust Printer Auto Head Adj. Standard Adj. No Yes Advanced Adj. No Yes Auto Print Off On * Manual Head Adj (*10 →P.721 ) No Yes Auto Band Adj. Standard Adj. No Yes Advanced Adj. No YesPrinter Parts > Control Panel > Menu Structure iPF8159 714