Canon Imageclass Mf5950dw User Guide
Have a look at the manual Canon Imageclass Mf5950dw User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
8-7 Maintenance Storing Toner Cartridges Be aware of the following points when storing a new toner cartridge or handling the toner cartr idge that was taken out of the machine for maint enance or reloca ting the machine somewhere. IMPORT\bNT Precautions when storing toner cartridges To use toner cartridges in a safe and trouble-free manner, store them in a place tha\It fulfills the following conditions. • Do not stor e toner cartridges in a location\I exposed to direct sunlight. • Do not stor e toner cartridges in a location\I subject to high temperature or humidity or in a location \Iwith dramatic chan\Iges in temperature or humidity. - Storage temperature range: 32 to 95°F (0 to 35°C) - Storage humidity range: 35 to 85% RH (no conde\Insation) • Do not stor e toner cartridges in a place wh\Iere corrosive gases, such as ammonia, a\Ire generated, or where a considerable amount of salt is c\Iontained in the ai\Ir, or where there is a lot of dust. • Keep toner car tridges out of the r\Ieach of small childr\Ien. • Keep t oner cartridges away from products that may be damaged by magnetism, such as a \Ifloppy disk or disk drive. Store toner cartridges in the sa\fe\R orientation as when they are installed in the\R \fachine. Do not store toner cartridges vertically or upside-down. When re\foving the toner cartridge which is being used fro\f the \fachine Immediately place the removed toner cartridge into the original protective bag or wrap it wi\Ith a thick cloth. \bbout a new toner cartridge Do not take a new toner cartridge out of the pr\Iotective bag until it is ready to be used. NOTE \bbout condensation Even within the storable humidity range, water droplets may develop both inside and\I outside toner cartridges. The formation of water droplets is called con\Idensation. Condensation will ad\Iversely affect the quality of toner cartridges. Using the Toner Saver Mode You can specify whether to conserve the amount of toner used for cop ying and faxing. NOTE To conserve the a\fount of toner used for printing Enable [ Toner Save] on the [Quality] tab of the printer driver. Keys to be used for this operation OK Menu 1 Press [] (Menu). 2 Select using [] or [ ] \fnd press [OK]. Menu Scan Settings USB Direct Print Se ... Printer Settings Adjustment/Maintenan 3 Select using [] or [] \fnd press [OK]. Adjustment/Maintenance Copy Image Adjustme... Printer Density Toner Saver Mode Black Text Processi ... 4 Select or using [] or [] \fnd press [OK]. Toner Saver Mode Off On Disa\fle the toner sav er mode. Ena\fle the toner sav er mode. NOTE When the is set to The amount of toner used can be co\Inserved. Note that the output \I may not be clear, as subtle details \Isuch as thin lines \Iand light colors may not be clearly reproduced. 5 Press [] (Menu) to return to the st\fndby mode. Purchasing Consu\fables To purchase replacement toner cartridges, contact your local authorized Canon dealer. T o find a dealer near, con tact the Canon help line.
8-8 Maintenance Before Replacing the Toner Cartridge Before replacing toner cartridges, see “Precautions When Replacing Toner Cartridge” (→P. 8-9) When the toner nearly runs out, follow the steps in the procedur e \felow \fefor e replacing the toner cartr idge. The machine con tinues prin ting until the toner runs out completely . 1 Open the front cover while holding down the open button. 2 Remove the toner c\frtridge. 3 Gently sh\fke the toner c\frtridge five or six times to e venly distribute the toner inside the c\frtridge. 4 Insert the toner c\frtridge. Fit (A) on both sides of\I the toner cartridge into the guides located on both sides of th\Ie machine and slide\I the toner cartridge into the machine until the t\Ioner cartridge comes to rest and is held aga\Iinst the back of the mac\Ihine. (A) (A) 5 Close the front cover. If you cannot close the fr\Ront cover Make sure that the toner cartridge is installed c\Iorrectly. Do not try to forcefully close the toner cover, as this may damage the machine. If there are white lines in the print result or it is blurred or distorted even though the above operations have been performed, replace the toner cartridge with a new one. “Replacing the Toner Cartridge” (→P. 8-8) Replacing the Toner Cartridge Before replacing toner cartridges, see “Precautions When Replacing Toner Cartridge” (→P. 8-9) 1 Open the front cover while holding down the open button.
8-9 Maintenance 2 Remove the toner c\frtridge. 3 T\fke out the new toner c\frtridge from the prot ective b\fg. You can open the pr\Iotective bag with your hands from the notch. * Keep the prot ective bag. You will need them w\Ihen you remove the toner cartridge for printer maintenance or other pu\Irposes. 4 Gently sh\fke the toner c\frtridge five or six times to e venly distribute the toner inside the c\frtridge. 5 Pl\fce the toner c\frtridge on \f fl\ft surf\fce. 6 Fold the t\fb, \fnd the pull out th\Fe se\fling t\fpes (\fppro xim\ftely 20” (50 cm)). IMPORT\bNT Precautions when pullin\Rg out the sealing \Rtape Do not pull the seali\Ing tape at an angle\I or up and down. If the tape breaks, it may not be pulled out \Icompletely. Front View • If the sealing tape \Iis still hanging outside the toner cartridge, pull it out completely . If the tape remains inside the \Itoner cartridge, it may cause poor print quality. If you are using the Fax, please note that you can only print the received data once, because the received data is deleted once it is printed. • Dispose of the sea\Iling tape according to local r egulations. 7 Insert the toner c\frtridge. Fit (A) on both sides of\I the toner cartridge into the guides located on both sides of th\Ie machine and slide\I the toner cartr idge into the machine until the t\Ioner cartridge comes to rest and is held aga\Iinst the back of the mac\Ihine. (A) (A) 8 Close the front cover. If you cannot close the fr\Ront cover Make sure that the toner cartridge is installed c\Iorrectly. Do not try to forcefully close the toner cover, as this may damage the machine. Precautions When Replacing Toner Cartridge See “Maintenance and Inspections” (→P. xv) in “Important Safety Instructions” as well. W\bRNING Do not dispose of a used toner cartridge in an open fla\fe. This may ignite the toner remaining inside th\Ie cartridge, resulting in burns or fire. C\bUTION Precautions to take when you get toner onto your hands or clothing If toner gets on your hands or clothi\Ing, wash them immediately with cold water. The toner sets onto hands or into clothing if you try to wash it with warm water. \fnce it is set, y\Iou can hardly remove the toner stains. Be careful not to scatter the toner. Do not pull out the \Isealing tape forcefully or stop pulling the tape halfway, as this may cause toner to spill out. If toner gets into your eyes or mouth, wash \Ithem immediately with cold water and consult a ph\Iysician.
8-10 Maintenance IMPORT\bNT \bbout replace\fent toner cartridges For optimum print quality, when you replace the toner cartridge, using Canon genuine one i\Is recommended. Model N\fme Supported C\fnon Genuine Toner C\frtridge MF5960dn/ MF5950dwCanon Car tridge 119 Canon Car tridge 119 II Be Careful of Counterfeit Toner Cartridges. Please be aware that there are counterfeit Canon toner cartridges in the marketplace. Use of counterfeit toner cartridges may result in poor print quality or machine performance. Canon is not responsible for any malfunction, accident or \Idamage caused by the use of count\Ierfeit toner cartridges. For more information, see the following Web site. http://www.canon.com/counterfeit Shake the toner cartridge before replace\fent. If the toner is not distributed evenly inside the car\Itridge, this may cause poor print quality. Hold the toner cartridges properly. When handling the t\Ioner cartridge, hold it properly, as shown in the illustration belo\Iw. Do not stand it vertically or hold it u\Ipside down. Do not touch the electrical contacts (\b) or the toner cartridge \fe\fory (B), and do not \Ropen the dru\f protective cover (C). Touching the electrical contacts (A) or the toner cartridge memory (B) may result in damage to the machine. Print quality may deteriorate if you touch or damage the\I photoconductor drum. Never touch it or open th\Ie drum protective cover (C). (A)Bottom View (C) (B) Do not touch the high-voltage contacts (D) or the electrical contacts (E). This may result in damage to the cartridge. (D) (E) Miscellaneous precautions • Do not expose the t\Ioner cartridge to direct sunlight or strong light. • Never disassemble or mo\Idify it. • Condensation may f orm in and on the toner cartridge if it is brought into an environment that expose\Is it to sudden changes in temperature and/or humidity. • If you mo ve the toner cartridge to a location that i\Is warmer or has higher humidit\Iy, leave the cartridge in the new location for 2 hours or longer w\Iithout opening the\I protective bag to allow it to adjust to the new temperature. • Do not leav e the front cover open for a long time with\I the toner cartridges installed. • Keep the toner car tridge away from equipment that \Igenerates magnetic fields, such as LCD displays and computers. • A toner cartridge is a magnetic product. Keep the toner cartridge away from products that may be damaged by magnetism, such as a floppy disk or disk drive. This may lead to damage to data. NOTE \bbout the packing \faterials The packing materials are subject to change in form or placement, or may be added or removed without notice. When is set to The machine continu\Ies printing the received fax if the toner cartridge is not replaced. Note that the output \Imay not be clear, as subtle details such \Ias thin lines and l\Iight colors may not be clearly reproduced, due to a small amount of\I toner remaining inside th\Ie toner cartridge. Plus, the data is delet\Ied once it has been\I printed. “Continue Printing When Toner Is Low” (→P. 6-26)
8-11 Maintenance Canon has instituted a worldwide recycling program for cartridges called “The Clean Earth Campaign”. This prog ram preser ves precious natur al resour ces \fy utilizing a var iety of mat erials found in the used cartridges tha t are of no further use, to remanufac ture new cartr idges which, at the same time, keeps the environmen t cleaner \fy reducing landfill wast e. Complete details conc erning this prog ram are enclosed in each Car tridge \fox. The Clean Earth Ca\fpaign ●THE Canon C\bRTRIDGE RECYCLING PROGR\bM The Canon Car tridge Rec ycling Pr ogram fulfills the first initiativ e of Canon ’s Clean Earth Campaig n, which supports four critical envir onmental areas: • Recycling in the Work place • Conserving Envir onmental Resour ces • Scientific Resear ch and Educa tion • Encouraging Out doors Appr eciation The remaining “Clean Earth ” initiativ es are support ed in the \b.S. through sponsorships of the National Par k Founda tion, the National Wildlife Feder ation, and The Natur e Conser vancy and in Canada through donations to the World Wildlife Fund Canada and The Nature Conser vancy of Canada. Sinc e its inception, The Canon Car tridge Rec ycling Pr ogram has collec ted huge amount of cartr idges that otherwise would hav e \feen discarded int o landfills or similar facilities. Inst ead, this rapidly gr owing prog ram retur ns used cartr idges to the manufactur ing proc ess, thus conser ving an arr ay of resour ces. Becoming a part of this wor thwhile prog ram is easy. When your cartr idge is of no further use, simply follo w the instructions detailed for \b.S. or Canadian residen ts. We apprecia te your support of The Canon Car tridge Rec ycling Pr ogram. Working together we can make a significan t con tri\fution to a cleaner planet. • Cartridges collec ted through this prog ram are not refilled . • You are not entitled to a tax deduction or re\fa te for the retur n of empty cartr idges. • This prog ram may \fe modified or discon tinued without notice . U.S.\b. PROGR\bM Packaging ●Option \b-1: Single Box Return • R epackage the empty cartr idge utilizing the wrapper and pulp mould end-\flocks from the new cartr idge’s \fox. • Place the empty cartr idge in the \fox of your new cartr idge. Seal the \fox. Recycling Used Cartridges
8-12 Maintenance ●Option B: Volu\fe Box Return We encour age you to use this option as a more efficient wa y to ship cartr idges. • Place as many cartr idges as possi\fle int o one \fox. C arefully seal the \fox with tape; or • C all 1-800-OK -Canon to rec eive your free eight cartr idge collec tion \fox. ●Option \b-2: Multiple Box Return We encour age you to use this option as a more efficient wa y to ship cartr idges. • Complete Option A-1. • Bundle multiple cartr idge \fox es together securely with tape. Please \fe sure that the shipment does not exceed \bPS specifications. Maxi\fu\f weigh t = 70 lb. (31.8 kg) Maximum length = 108” (2,743 mm) Maximum gir th (length + 2 x width + 2 x height) = 130” (3,302 mm) If your shipment ex ceeds the a\fov e limits, please call 1-800-OK -Canon for special shipping infor mation. Please Note: Do not send defec tive cartr idges for replac ement. Defective cartr idges under war ranty should \fe ex changed \fy an authoriz ed dealer or servic e facility as pro vided in the warr anty. Shipping Apply the \bPS authorized returning la\fel provided in this guide. Residents of \blask a and Hawaii: Do not use the \bPS authoriz ed retur ning la\fel. For Alask a and Haw aii Canon set up alter native mail servic e with the \b.S. Postal Ser vice. Please call 1-800-OK -Canon to rec eive \b.S. Postal Ser vice merchandise retur ning la\fel. • Give the shipment to your \bPS driv er when you rec eive your nex t regular deliver y; (\bPS may charge a fee for customers who call \bPS to pick up a cartr idge shipment if they do not already hav e a deliver y scheduled.) or • Take the shipment to your local \bPS rec eiving point .
8-13 Maintenance C\bN\bD\b PROGR\bM-C\bN\bD\b PROGR\bMME ●Option \b: Single Box Return • R epackage the empty cartr idge utilizing the wrapper and pulp mould end-\flocks from the new cartr idge’s \fox. • Place the empty cartr idge in the \fox of your new cartr idge. Seal the \fox. • Apply the Canon Canada Inc ./Canada Post la\fel pro vided in this \frochur e. Canon ’s la\fels are specially marked so that Canon pays the postage. • Deposit your empty cartr idge in any full size street mail\fox or take it to your local Canada Post outlet or franchise . ●Option B: Volu\fe Box Return (eight or \fore cartridges) We encour age you to use this option as a more efficient wa y to ship cartr idges. • Call 1-800-667-2666 to rec eive your free Canon collec tion \fox kit . • The collec tion \fox can acc ommodate eight individual cartr idge \fox es. • Place your eight individually packaged \fox es of empty cartr idges int o the Canon collec tion \fox. Seal the \fox. • Apply the Canon Canada Inc ./Canada Post la\fel pro vided in this \frochur e. • Canon’s la\fels are specially marked so that Canon pay s the postage. • Deliver to any local Canada Post outlet or franchise . Cust omers who hold a Commer cial pick-up agr eement with Canada Post may hav e their collec tion \fox picked up. Working to preserve endangered species is a long-standing Canon interest. To this end, for ever y cartr idge collec ted, Canon Canada donat es $1, shared equally \fetw een World Wildlife Fund Canada and the Nature Conser vancy of Canada. This donation is utilized in Canada. • For further infor mation a\fout The Clean Earth Campaig n in Canada, please call or writ e to Canon. 1-800-667-2666 C anon Canada Inc . Corporate Cust omer Rela tions 6390 Dixie Road M ississauga, ON L5T 1P7
8-14 Maintenance Before transporting the machine, see “Precautions When Relocating the Machine” (→P. 8-15) Follow the steps in the procedure \felow to relocate the machine somewhere else for maintenanc e and other purposes. 1 Turn the power OFF, then disconnect the c\fbles \fnd cord from the m\fchine. USB c\fble*(2) Turn the comput er off. (3) Remo ve it from the machine. LAN c\fble*(4) Remove it from the machine. Power cord(5) \bnplug the pow er plug from the AC pow er outlet. (6) Remo ve it from the machine. Telephone c\fbles*(7) Remove it from the machine. * Whether the ca\fle is connec ted or not var ies depending on your envir onment. 2 If you \fre using the multi-pu\Frpose tr\fy, close it. 3 Pull out the p\fper dr\fwer. 4 C\frry the m\fchine to the new inst\fll\ftion site. After making sure that the cover and tray are closed, hold the handle on the front to lift and transport the machine. Check the weight of the machi\Ine so it can be car\Iried safely. When the optional p\Raper feeder is installed\R Remove the paper feeder from the machine, install it in the\I new installation site, then transport the machine. * Do not carr y the machine with\I the paper feeder installed. If you do so, the paper feeder may drop, resulting in persona\Il injury. 5 Put the m\fchine down c\frefully \ft the new inst\fll\ftion sit e. NOTE Installation procedures See the Starter Guide that come\Is with the machine\I. Relocating the Machine When transporting the \fachine lo\Rng distance To prevent damage to the machine during transport, perform the following. • Remove the toner cartr idges * “Storing Toner Cartridges” (→ P. 8-7) • Securely pack the printer in the orig inal \fox with packing mat erials * If the original \fox and packing mat erials are not av aila\fle, find an appropr iate \fox along with packing mat erials and pack the machine and the parts appropr iately.
8-15 Maintenance Precautions When Relocating the Machine IMPORT\bNT Do not carry the \fachine with t\Rhe covers or trays open. Make sure that the scannin\Ig platform and paper drawer are closed before lifting, carrying, and relocating the machi\Ine. C\bUTION Set the \fachine down slowly and carefully. Be careful not to hurt your hands or finge\Irs. W\bRNING When relocating the \fachine Be sure to turn off the power switches of the machin\Ie and your computer, and unplug the po\Iwer plug and interface cables. Failure to do so can damage\I the cables or cords, resulting in a fire or electrical shock.