Canon Fax L2000ip User Guide

Using the MP Tray2-25
2
Getting Started
Turning the MP Tray ON/OFF and Setting the 
Paper Size
To use the MP tray as one of the input trays, you need to select ‘USE’ for MP TRAY in the 
PAPER SETTINGS menu.
Follow the procedure below to set MP TRAY to ‘USE’ or ‘DO NOT USE’, and to select the 
paper size.
1Open all three one-touch speed dialing panels.
2Press [Data Registration].
3Press [▼] or [▲] until  appears ➞ press 
[OK].
4Press [▼] or [▲] until  appears ➞ press [OK].
5Press [▼] or [▲] to display  ➞...

Using the MP Tray2-26
Getting Started
2
7Press   (Stop) to return to the Standby mode.
Setting the Paper Type for the MP Tray
You can set the paper type you use on the MP tray after you set MP TRAY to ‘USE’.
1Open all three one-touch speed dialing panels ➞ press [Data 
Registration] ➞ [▼] or [▲] until  appears ➞ 
press [OK].
If necessary, see steps 1 to 3 of “Turning the MP Tray ON/OFF and Setting the 
Paper Size”, on p. 2-25.
2Press [▼] or [▲] until  appears ➞ press [OK].
3Press [▼] or [▲] to select , ,...

Available Paper Stock2-27
2
Getting Started
Available Paper Stock
Paper types which can be used with this machine are shown in the following table.
*1 64 to 90 g/m2
*2 90 to 128 g/m2✓: Available
– : Unavailable
IMPORTANT
 It is recommended not to use the back side of preprinted paper. It may cause a paper jam.
Paper TypeAvailable Loading Place (Paper Set Place)
Paper CassetteMP Tray
Plain
*1✔✔
Heavy
*2✔✔
Recycled
*1✔✔
Colored✔✔
Bond✔✔
Thin –✔
Transparencies –✔
Envelope –✔
Labels –✔
 

Available Paper Stock2-28
Getting Started
2
✓: Available–: Unavailable
NOTE
 For instructions on how to load paper, see the following pages:
- Paper Cassette: “Loading Paper into the Paper Cassettes”, on p. 1-41.
- MP Tray: “Using the MP Tray”, on p. 2-16.
 The paper sizes that can be used for report function are letter, legal, and A4.
 The paper sizes that can be used for fax function are letter, legal, A4, A5, and B5.
Paper SizeLength x Width
Available Loading Place 
(Paper Set Place)
Paper...

Using the Face-Up Tray2-29
2
Getting Started
Using the Face-Up Tray
To select face up delivery, pull down the face-up tray. The machine automatically switches to 
face up delivery. The face-up tray is particularly useful for heavier paper.
To open the face-up tray, take hold of its tab, and pull down the tray a. Grasp the end of the 
face-up tray, and pull it out until it locks b.
Tab
 

Using the Energy Saver Mode2-30
Getting Started
2
Using the Energy Saver Mode 
You can set the machine to enter a low energy sleep mode after it remains idle for a specified 
length of time. This ensures that the machine consumes less power when it is not being used.
Turning the Energy Saver Feature ON
1Open all three one-touch speed dialing panels.
2Press [Data Registration].
3Press [▼] or [▲] until  appears ➞ press 
[OK].
4Press [▼] or [▲] until  appears ➞ press 
[OK].
5Press [▼] or [▲] to display  ➞...

Using the Energy Saver Mode2-31
2
Getting Started
6Enter a number for the time (from 03 to 30 minutes) using the 
numeric keys that you want the machine to remain idle before it 
automatically enters the low energy sleep mode ➞ press [OK].
You can also press [▼] or [▲] to specify the time.
7Press   (Stop) to return to the Standby mode.
After the machine enters the Energy Saver mode, only the Energy Saver 
indicator on the operation panel remains lit in green, while the LCD display is 
turned off.
NOTE
...

Using the Energy Saver Mode2-32
Getting Started
2
The machine does not enter the Energy Saver mode in the following cases:
 If documents are stored in memory
 If a document or paper jam has occurred, the paper cassettes have run out of paper, or if the 
toner cartridge has run out of toner
 If a document has been fed into the ADF (Automatic Document Feeder)
 If you set the machine to print an Activity Management report at a preset time
 If the machine is set to poll another machine within three...

Using the Energy Saver Mode2-33
2
Getting Started
3Press [▼] or [▲] to select a day of the week for which you want to 
set the daily timer ➞ press [OK].
4Enter the time in 24-hour notation (e.g., 1:00 p.m. as 13:00) using 
the numeric keys ➞ press [OK].
NOTE
 If you want to clear the time you have set, press   (Clear) at this step ➞ press   
(OK).
 To end the procedure and return to the Standby mode, press   (Stop).
5Repeat steps 3 to 4 to set the daily timer for other days of the 
week.
If you have...

Using the Energy Saver Mode2-34
Getting Started
2
2Press [▼] or [▲] until  appears ➞ press [OK].
3Press [▼] or [▲] to select  or  ➞ press [OK]. 
If you want to use the Auto Clear function, select , and proceed to step 4.
If you do not want to use the Auto Clear function, select , and proceed 
to step 5.
4Enter the desired time period using the numeric keys ➞ press 
[OK].
You can also press [▼] or [▲] to specify the time.
The Auto Clear Time settings are from 1 to 9 minutes (in one minute 
increments)....