Brother Dcp 395cn User Manual

							
Printing photos from a camera59
6
Printing photos 
directly from a digital 
camera (without 
PictBridge)
6
If your camera is using the USB Mass 
Storage standard, you can connect your 
camera in storage mode. This enables you to 
print photos from your camera.
If you would like to print photos in PictBridge 
mode, see Printing photos directly from a 
PictBridge camera  on page 57. 
Note
The name, availability and operation differ 
among digital cameras. Please refer to the 
documentation supplied with your camera 
for detailed information, such as how to 
switch from PictBridge mode to mass 
storage mode. 
 
Printing Images6
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off. Connect your camera to the USB 
direct interface (1) on the machine using 
the USB cable.
 
1 USB direct interface
bTurn on the camera.
cFollow the steps in  Print Images 
on page 41.
IMPORTANT
To prevent damage to your machine, do 
not connect any device other than a digital 
camera or USB Flash memory drive to the 
USB direct interface.
 
1
 
						

							
Chapter 6
60
Understanding the 
Error Messages
6
Once you are familiar with the types of errors 
that can occur while you are printing from a 
camera, you can easily identify and 
troubleshoot any problems. „ Out of Memory
This message will appear if you are 
working with images that are too large for 
the machines memory.
„ Unusable Device
This message will appear if you connect a 
camera that is not using the USB Mass 
Storage standard. This message will also 
appear if you connect a broken device to 
the USB direct interface. 
(For more detailed solutions see  Error and 
Maintenance messages  on page 80.)
 
						

							
Section IV
SoftwareIV
Software and Network features62
 
						

							
62
7
The CD-ROM includes the Software User’s 
Guide and Network User’s Guide for features 
available when connected to a computer (for 
example, printing and scanning). The guide 
has easy to use links that, when clicked, will 
take you directly to a particular section.
You can find information on these features:„ Printing
„ Scanning
„ ControlCenter3 (Windows
®)
„ ControlCenter2 (Macintosh)
„ PhotoCapture Center
®
„Network Printing
„ Network Scanning
„ Wired Network
How to read the HTML User’s Guide 
This is a quick reference for using the HTML 
User’s Guide. 
(Windows
®)
Note
If you have not installed the software, see 
Viewing Documentation  on page 2.
 
aFrom the Start menu, point to  Brother, 
DCP-XXXX  (where XXXX is your model 
number) from the programs group, then 
click  User’s Guides  in HTML format.
bClick SOFTWARE USER’S GUIDE  
(or  NETWORK USER’S GUIDE ) from 
the Top Menu.
 
cClick the heading you would like to view 
from the list at the left of the window.
 
(Macintosh)
aMake sure your Macintosh is turned on. 
Insert the Brother CD-ROM into your 
CD-ROM drive.
bDouble-click the  Documentation icon.
cDouble-click your language folder, and 
then double-click top.html.
dClick SOFTWARE USER’S GUIDE  
(or  NETWORK USER’S GUIDE ) in the 
top menu, and then click the heading 
you would like to read from the list at the 
left of the window.
 
Software and Network features7
 
						

							
Section V
AppendixesV
Safety and Legal64
Troubleshooting and Routine Maintenance75
Menu and Features98
Specifications110
Glossary123
 
						

							
64
A
Choosing a locationA
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put 
the machine near a standard AC power outlet. Choose a location where the temperature remains 
between 50°F and 95 °F (10 °C and 35 °C).
WARNING 
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment, 
chemicals or water. 
  
DO NOT connect your machine to AC power outlets on the same circuit as large appliances or 
other equipment that might disrupt the power supply.
 
CAUTION 
• Avoid placing your machine in a high-traffic area.
• Avoid placing your machine on carpet.
• DO NOT expose the machine to direct sunlight, excessive heat, moisture, or dust.
• DO NOT connect your machine to AC power outlets controlled by wall switches or automatic 
timers.
• Disruption of power can wipe out information in the machines memory.
• DO NOT tip the machine, or place it on any tilted surface. Doing this may cause ink spillage  and internal damage to your machine.
 
 
Safety and LegalA
 
						

							
Safety and Legal65
A
To use the machine safelyA
Please keep these instructions for later reference and read them before attempting any 
maintenance.
WARNING 
There are high voltage electrodes inside the machine. Before you clean the inside of the 
machine, make sure you have unplugged the power cord from the AC power outlet. Doing this 
will prevent an electrical shock.
 
 
 
DO NOT handle the plug with wet hands. Doing this may cause an electrical shock.
 
Always make sure the plug is fully inserted.
  
DO NOT pull on the middle of the AC power cord. Doing this may cause an electrical shock.
 
 
						

							
66
 
DO NOT use flammable substances, any type of spray or an organic solvent/liquid that contains 
alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a fire 
or electrical shock.
  
Unplug this product from the wall outlet before cleaning the inside of the machine.
 
 
If the machine becomes hot, releases smoke, or generates any strong smells, immediately turn 
off the power switch and unplug the machine from the AC power outlet. Call Brother Customer 
Service. (See Brother numbers  on page i.)
  
If metal objects, water or other liquids get inside the machine, immediately unplug the machine 
from the AC power outlet. Call Brother Customer Service. (See  Brother numbers on page i.)
  
This product must be installed near an AC power outlet that is easily accessible. In case of an 
emergency, you must unplug the power cord from the AC power outlet to shut off the power 
completely.
  
This product should be connected to an AC power source within the range indicated on the 
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a 
qualified electrician.
  
DO NOT use the machine if the power cord is frayed or damaged, doing so may cause a fire.
 
 
						

							
Safety and Legal67
A
CAUTION 
DO NOT put your hands on the edge of the machine under the scanner cover. Doing this may 
cause injury.
  
DO NOT put your hands on the edge of the paper tray under the paper tray cover. Doing this 
may cause injury.
 
 
 
 
						

							
68
 
DO NOT touch the area shaded in the illustration. Doing this may cause injury.
  
When moving the machine you must lift it from the base, by placing a hand at each side of the 
unit as shown in the illustration. DO NOT carry the machine by holding the scanner cover or the 
Jam Clear Cover.
  
Lightning and power surges can damage this product! We recommend that you use a quality 
surge protection device on the AC power line or unplug the cord during a lightning storm.