Brother Dcp 395cn User Manual
Have a look at the manual Brother Dcp 395cn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive39 5 „Adapters are not included with the machine. Contact a third party supplier for adapters. „ This product supports xD-Picture Card™ Type M / Type M + / Type H (Large Capacity). „ IBM Microdrive™ is not compatible with the machine. „ CompactFlash ® Type II is not supported. The PhotoCapture Center ® feature lets you print digital photos from your digital camera at high resolution to get photo quality printing. Memory cards or a USB Flash memory drive folder structure5 Your machine is designed to be compatible with modern digital camera image files, memory cards and USB Flash memory drive; however, please read the points below to avoid errors: „ The image file extension must be .JPG (Other image file extensions like .JPEG, .TIF, .GIF and so on will not be recognized). „ Direct PhotoCapture Center ® printing must be performed separately from PhotoCapture Center ® operations using the PC. (Simultaneous operation is not available.) „ The machine can read up to 999 files on a memory card or USB Flash memory drive. „ The DPOF file on the memory cards must be in a valid DPOF format. (See DPOF printing on page 48.) Please be aware of the following: „ When printing Print Index or Print Images, the PhotoCapture Center ® will print all valid images, even if one or more images have been corrupted. Corrupted images will not be printed. „ (memory card users) Your machine is designed to read memory cards that have been formatted by a digital camera. When a digital camera formats a memory card it creates a special folder into which it copies image data. If you need to modify the image data stored on a memory card with your PC, we recommend that you do not modify the folder structure created by the digital camera. When saving new or modified image files to the memory card we also recommend you use the same folder your digital camera uses. If the data is not saved to the same folder, the machine may not be able to read the file or print the image. „ (USB Flash memory drive users) This machine supports USB Flash memory drives that have been formatted by Windows ®.
Chapter 5 40 Getting started5 Firmly put a memory card or USB Flash memory drive into the proper slot. 1 USB Flash memory drive 2 CompactFlash ® 3 SD, SDHC 4 Memory Stick™, Memory Stick PRO™ 5 xD-Picture Card™ IMPORTANT The USB direct interface supports only a USB Flash memory drive, a PictBridge compatible camera, or a digital camera that uses the USB mass storage standard. Any other USB devices are not supported. Photo Capture key lights: „Photo Capture light is on, the memory card or USB Flash memory drive is properly inserted. „ Photo Capture light is off, the memory card or USB Flash memory drive is not properly inserted. „ Photo Capture light is blinking, the memory card or USB Flash memory drive is being read or written to. IMPORTANT DO NOT unplug the power cord or remove the memory card or USB Flash memory drive from the media drive (slot) or USB direct interface while the machine is reading or writing to the memory card or USB Flash memory drive (the Photo Capture key is blinking). You will lose your data or damage the card. The machine can only read one memory card or USB Flash memory drive at a time. 12345
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive41 5 Entering PhotoCapture mode5 After you insert the memory card or USB Flash memory drive, press the (Photo Capture ) key to illuminate it in blue and display the PhotoCapture options on the LCD. The LCD shows: Press a or b to scroll through the Photo Capture key options. „ View Photo(s) (See page 41.) „ Print Index (See page 42.) „ Print Photos (See page 42.) „ Enhance Photos (See page 43.) „ Search by Date (See page 46.) „ Print All Photos (See page 47.) „ Slide Show (See page 47.) „ Trimming (See page 48.) Note If your digital camera supports DPOF printing, see DPOF printing on page 48. When the option you want is highlighted, press OK. Print Images5 View Photos5 You can preview your photos on the LCD before you print them. If your photos are large files there may be a delay before each photo is displayed on the LCD. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose View Photo(s) . Press OK. cPress d or c to choose your photo. dPress + or - repeatedly to enter the number of copies you want. eRepeat steps c and d until you have chosen all the photos. Note Press Clear/Back to go back to the previous level. fAfter you have chosen all the photos, do one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. View Photo(s) PHOTO Select & Press OK Print PhotosPrin t P hoto sPrint IndexP rin t In dex Enhance PhotosE nha nce P hoto s View photos on the LCD V ie w p h oto s o n th e L C D and select the images an d s e le ct t h e im age s you want to y o u w ant to print.prin t.Search by DateS earc h b y D ate Print All PhotosP rin t A ll P ho to s
Chapter 5 42 Print Index (Thumbnails)5 The PhotoCapture Center® assigns numbers for images (such as No.1, No.2, No.3, and so on). The PhotoCapture Center® does not recognize any other numbers or file names that your digital camera or computer has used to identify the pictures. You can print a thumbnail page. This will show all the pictures on the memory card or USB Flash memory drive. Note Only file names that are 8 characters or less will be printed correctly on the index sheet. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Print Index . Press OK. cPress a or b to choose Layout Format . Press dor c to choose 6 Images/Line or 5 Images/Line . Press OK. Print time for 5 Images/Line will be slower than 6 Images/Line , but the quality is better. dPress a or b to choose the paper settings, Paper Type and Paper Size . Do one of the following: „ If you chose Paper Type , press d or c to choose the type of paper you are using, Plain Paper , Inkjet Paper , Brother BP71 or Other Glossy . Press OK. „ If you chose Paper Size , press d or c to choose the paper size you are using, Letter or A4. Press OK. „ If you do not want to change the paper settings, go to step e. ePress Color Start to print. Printing Photos5 Before you can print an individual image, you have to know the image number. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPrint the Index. (See Print Index (Thumbnails) on page 42.) cPress a or b to choose Print Photos . Press OK. dPress a repeatedly to enter the image number that you want to print from the Index page (Thumbnails). If you want to choose a two digit number, press c to move the cursor to the next digit. (For example, enter 1, c, 6 to print image No.16.) Press OK. Note Press b to decrease the image number. 6 Images/Line 5 Images/Line
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive43 5 eRepeat stepd until you have entered all the image numbers that you want to print. (For example, enter 1, OK , 3 , OK , 6 , OK to print images No.1, No.3 and No.6.) Note You can enter up to 12 characters (including commas) for the image numbers you want to print. fAfter you have chosen all the image numbers, press OK again. gPress + or - repeatedly to enter the number of copies you want. hDo one of the following: „ Change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. Enhance Photos5 You can edit and add effects to your photos and view them on the LCD before printing. Note • After adding each effect, you can enlarge the view of the image by pressing Ink. To go back to the original size, press Ink again. • The Enhance Photos feature is supported by technology from Reallusion, Inc. Auto Correct5 Auto Correct is available for most photos. The machine decides the suitable effect for your photo. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Enhance Photos . Press OK. cPress d or c to choose your photo. Press OK. dPress a or b to choose Auto Correct . Press OK. Note If Remove Red-Eye appears on the LCD, press a to attempt to remove red-eye from your photo. ePress OK. Then press + or - repeatedly to enter the number of copies you want. fDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print.
Chapter 5 44 Enhance Skin-Tone5 Enhance Skin-Tone is best used for adjusting portrait photographs. It detects human skin color in your photos and adjusts the image. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Enhance Photos . Press OK. cPress d or c to choose your photo. Press OK. dPress a or b to choose Enhance Skin-Tone . Press OK. Note You can also adjust the effect level manually, by pressing aor b. ePress OK. Then press + or - repeatedly to enter the number of copies you want. fDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. Enhance Scenery5 Enhance Scenery is best used for adjusting landscape photographs. It highlights green and blue area in your photo, so that the landscape looks more sharp and vivid. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Enhance Photos . Press OK. cPress d or c to choose your photo. Press OK. dPress a or b to choose Enhance Scenery . Press OK. Note You can also adjust the effect level manually, by pressing aor b. ePress OK. Then press + or - repeatedly to enter the number of copies you want. fDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print.
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive45 5 Remove Red-Eye5 The machine detects eyes in your photos and will attempt to remove red-eye from your photo. Note There are some cases when red-eye may not be removed.• When the face is too small in the image. • When the face is turned too far up, down, left or right. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Enhance Photos . Press OK. cPress d or c to choose your photo. Press OK. dPress a or b to choose Remove Red-Eye . Press OK. „ When Remove Red-Eye is successful, the photo with the effect is shown. The adjusted part is shown in a red frame. Press OK. „ When Remove Red-Eye is unsuccessful, Unable to Detect. is shown. Press OK to go back to the previous level. Note Press a to try Remove Red-Eye again. ePress + or - repeatedly to enter the number of copies you want. fDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. Monochrome5 You can convert your photo to black & white. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Enhance Photos . Press OK. cPress d or c to choose your photo. Press OK. dPress a or b to choose Monochrome . Press OK. ePress OK. Then press + or - repeatedly to enter the number of copies you want. fDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print.
Chapter 5 46 Sepia5 You can convert the color of your photo to sepia. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Enhance Photos . Press OK. cPress d or c to choose your photo. Press OK. dPress a or b to choose Sepia. Press OK. ePress OK. Then press + or - repeatedly to enter the number of copies you want. fDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. Search by Date5 You can find your photos based on date. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Search by Date . Press OK. cPress a or b to choose the date that you want to search from. Press OK. dPress d or c to choose your photo. Note You can view photos with other dates by pressing d or c continuously. Press d to view an older photo and c to view a more recent photo. ePress + or - repeatedly to enter the number of copies you want. fRepeat steps d and e until you have chosen all your photos. gAfter you have chosen all your photos, do one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print.
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive47 5 Print All Photos5 You can print all the photos on your memory card or USB Flash memory drive. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press (Photo Capture ). bPress a or b to choose Print All Photos . Press OK. cPress + or - repeatedly to enter the number of copies you want. dDo one of the following: „ Change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. Slide Show5 You can view all your photos on the LCD using Slide Show . You can also choose a photo during the operation. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Slide Show . Press OK. cPress Stop/Exit to finish Slide Show. Printing a photo during a Slide Show5 aPress OK to stop at one image while Slide Show is operating. b Press + or - repeatedly to enter the number of copies you want. cDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print.
Chapter 5 48 Trimming5 You can trim your photo and print a part of the image. Note If your photo is very small or has irregular proportions you may not be able to trim the photo. The LCD will show Image Too Small. or Image Too Long. aMake sure you have put the memory card or USB Flash memory drive in the proper slot. Press ( Photo Capture ). bPress a or b to choose Trimming. Press OK. cPress d or c to choose your photo. Press OK. dAdjust the red frame around your photo. The part inside of the red frame will be printed. „ Press + or - to enlarge or reduce the frame size. „ Press each arrow key to move the position of the frame. „ Press Ink to rotate the frame. „ Press OK when you have finished adjusting the frame setting. ePress + or - repeatedly to enter the number of copies you want. fDo one of the following: „ Press OK and change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. DPOF printing5 DPOF stands for Digital Print Order Format. Major digital camera manufacturers (Canon Inc., Eastman Kodak Company, FUJIFILM Corporation, Panasonic Corporation and Sony Corporation) created this standard to make it easier to print images from a digital camera. If your digital camera supports DPOF printing, you will be able to choose on the digital camera display the images and number of copies you want to print. When a memory card (CompactFlash ®, Memory Stick™, Memory Stick PRO™, SD, SDHC or xD-Picture Card™) containing DPOF information is put into your machine, you can print the chosen image easily. aMake sure you have put the memory card in the proper slot. Press ( Photo Capture ). The machine will ask you if you want to use DPOF setting. bPress + to choose Yes. cDo one of the following: „ Change the print settings. (See page 49.) „ If you do not want to change any settings, press Color Start to print. Note An Invalid DPOF File error can occur if the print order that was created on the camera has been corrupted. Delete and recreate the print order using your camera to correct this problem. For instructions on how to delete or recreate the print order, refer to your camera manufacturers support website or accompanying documentation.