Bosch 7412 G User Manual

D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTSEN | 91
Bosch Security Systems | 1/04 | 47775E
P## Alarm Verify
Default:See Program Record Sheet
Selection:Yes or No
Yes Enable alarm verification on this point.
Alarm verification points must be
programmed as resettable.
No
Disable alarm verification on this
point.
Use this option only with Fire points to designate
them for alarm verification.
When an Alarm Verification point goes into alarm,
the control panel removes power to all Resettable
points for...

D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTSEN | 92
Bosch Security Systems | 1/04 | 47775E
P### Point Index
Default:See Program Record Sheet
Selection:Blank (00) to 31
This entry selects one of the 31 P## Index codes
that define the point’s characteristics and determines
how the control panel responds to various point
conditions.
Blank (00) disables the point.
Missing Point Reports occur if a point
address does not exist for a point assigned
a point index. Extra Point Events occur if
more than two...

D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTSEN | 93
Bosch Security Systems | 1/04 | 47775E
P### BFSK/Relay
Default:See Program Record Sheet
Selection:0 to 9
Use this option to:
2. Determine the point number reported in BFSK
when this point is tripped.
3. Activate a relay when the point goes into an
alarm condition, even if the control panel is
programmed for Modem reporting as shown in
Table 29.
BFSK/Relays do not activate for Fire
Supervisory or Non-Fire Supervisory
points.
Table 29: P###...

D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTSEN | 94
Bosch Security Systems | 1/04 | 47775E
4.3 COMMAND 7 and COMMAND 9
These entries assign point indexes, BFSK report
code, BFSK relay that trips, and the text for the
COMMAND 7 and COMMAND 9 command
center functions.
CMD7 Point Index
Default:31
Selection:Blank (00) to 31
This entry selects one of the 31 P## Index codes
that define how the control panel reacts when a
COMMAND 7 is initiated.
0101
0101
0101The point index code used for COMMAND
7 must...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 95
Bosch Security Systems | 1/04 | 47775E
5.0 RADXSKED
5.1 Windows
Use this programming module to define the
windows for Opening and Closing and User Access.
5.1.1 Opening and Closing
Use these windows to set a schedule for disarming
and arming. The disarming and arming schedules
provide several independent features:
• Suppress normal Opening and/or Closing
Reports when 
A# Disable O/C in Windows is
programmed Yes.
• Generate a Fail to Open Report if...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 96
Bosch Security Systems | 1/04 | 47775E
W# Monday
Default:No
Selection:Yes or No
W# Tuesday
Default:No
Selection:Yes or No
W# Wednesday
Default:No
Selection:Yes or No
W# Thursday
Default:No
Selection:Yes or No
W# Friday
Default:No
Selection:Yes or No
W# Saturday
Default:No
Selection:Yes or No
W# Open Early Begin
Default:00:00
Selection:HH:MM (hours and minutes)
00:00 to 23:59
Open Early Begin: This program item is one of
three required to create an...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 97
Bosch Security Systems | 1/04 | 47775E
W# Open Window Stop
Default:00: 00
Selection:HH:MM (hours and minutes)
Enter the time you want the control panel to end the
Opening Window. The window stops at the end of
the minute.
00:00 is midnight, 23:59 is 11:59 PM Make entries
using a 24-hour clock (for example, 7:00 AM is
entered as 07:00, 2:45 PM is entered as 14:45).
This program item is one of three required to create
an Opening Window. To program...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 98
Bosch Security Systems | 1/04 | 47775E
Table 32: Programming for Two Same Day Opening Windows (see Figure 4)
Open Close
W# Day of Week
Early
BeginStart StopEarly
BeginStart StopeXcept
On
HolidayHoliday
Index Area(s)
1S  M  T  W  T  F  S06: 0007 : 0008: 00Yes / No1   2   3   41  2  3  4  5  6  7  8
2
S  M  T  W  T  F  S13 : 00 14 : 00 15 : 00
Yes / No1   2   3   4
1  2  3  4  5  6  7  8
Do not program a single window to cross the midnight boundary....

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 99
Bosch Security Systems | 1/04 | 47775E
Disable/Restart the control panel to activate
today’s window. If you are programming a
window that needs to activate on the same day
that you are programming it, do a disable/restart
after programming.
W# Close Window Start
Default:00: 00
Selection:HH:MM (hours and minutes)
Enter the time that you want the control panel to
start the Closing Window. The window goes into
effect at the beginning of the minute....

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 100
Bosch Security Systems | 1/04 | 47775E
W# Xept Holiday
Default:No
Selection:Yes or No
Yes Do not activate this window on
holidays.
To use this selection, the window must
be programmed to activate on at least
one day of the week and a Holiday
Index must be enabled.
No A holiday does not prevent this
window from activating.
You also use this selection if Opening
and/or Closing Windows are only
needed on certain days of the year. Do
not program the...