Bosch 7412 G User Manual

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 101
Bosch Security Systems | 1/04 | 47775E
Table 35: Opening/Closing Windows Worksheet
Open Close
W# Day of Week
Early
BeginStart StopEarly
BeginStart StopeXcept
On
HolidayHoliday
Index Area(s)
1S  M  T  W  T  F  S_ _ : _ __ _ : _ __ _ : _ __ _ : _ __ _ : _ __ _ : _ _Yes    No1   2   3   41  2  3  4  5  6  7  8
2 S  M  T  W  T  F  S _ _ : _ _ _ _ : _ _ _ _ : _ _ _ _ : _ _ _ _ : _ _ _ _ : _ _ Yes    No 1   2   3   4
1  2  3  4  5  6  7  8
3S  M  T  W...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 102
Bosch Security Systems | 1/04 | 47775E
Table 38: Delivery Schedule*
Open Close
W# Day of Week
Early
BeginStart StopEarly
BeginStart StopeXcept
On
HolidayHoliday
Index Area(s)
3S  M  T  W  T  F  S02 : 3002 : 4503 : 0003 : 0503: 1503: 30Yes    No1   2   3   41  2  3  4  5  6  7  8
00 : 00 01 : 00
Yes    No1   2   3   4
1  2  3  4  5  6  7  8
Program at leastone day Yes.Day(s) of the week, but not on holidaysYesSelect atleast oneindex
Program at...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 103
Bosch Security Systems | 1/04 | 47775E
UW# Sunday
Default:No
Selection:Yes or No
This prompt, and the next six day of the week
prompts, select the days of the week that the User
Group Window is active.
0101
0101
0101See the W# Sunday prompt in Section
5.1.1 Opening and Closing instructions
for more information about programming
this prompt.
UW# Monday
Default:No
Selection:Yes or No
UW# Tuesday
Default:No
Selection:Yes or No
UW# Wednesday...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 104
Bosch Security Systems | 1/04 | 47775E
Holiday Indexes for User Group Windows
You can enable up to four Holiday Indexes to use
with User Group Windows. Enable at least one
Holiday Index if 
UW# Xept Holiday is
programmed Yes for this user window, or if you
want this window to activate only on specific dates.
Holidays are programmed in Section 5.3 Holiday
Indexes of the program.
UW# Xept Holiday
 Default:No
Selection:Yes or No
Determine if the...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 105
Bosch Security Systems | 1/04 | 47775E
S## Function Code
Enter the function code you want this sked to execute. Sked Function 12 is reserved and is not a valid entry.
The programmer automatically displays the available parameter choices and range fields for this function (such as,
Yes/No is automatically displayed for the areas when choosing the Arm/Disarm function while a blank prompt
exists for the point number you want to bypass when choosing...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 106
Bosch Security Systems | 1/04 | 47775E
S## Area 1[through 8]Yes
Unbypass all
points in Area #.5Unbypass All Points: This function is
not available as a command center
function. The entry in the 
S## Area #
prompt defines the area(s) where the
sked unbypasses all points. The sked
unbypasses all points in the area,
regardless of how they were bypassed.
This sked can unbypass all points in
multiple areas.Default: No
Selection: Yes or No
Enable the...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 107
Bosch Security Systems | 1/04 | 47775E
S## Defer TestYesDefer the Test
Report.
Default: No
Selection: Yes or No
Enable sked to defer the Test
ReportNoSend the Test
Report on
schedule.
S## Hourly ReportYesSend the Test
Report every hour.
9Test Report: This function emulates
the Send Report? command center
function. This function generates a Test
Report ONLY from Area 1 but contains
panel-wide status information. The
report is sent to the phone(s)...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 108
Bosch Security Systems | 1/04 | 47775E
S## Cmd Center
Default: Blank (0)
Selections: Blank (0), 1 to 8Blank (0)No command center
is specified for
Custom Function
activation.
Identify the specific keypad
(CC #) where the Custom
Function is entered. Only one
command center can be
assigned for this sked function.1 to 8Command center
address specified for
Custom Function
activation.
S## Custom Func
Default: Blank (0)Blank (0)No Custom
Function is...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 109
Bosch Security Systems | 1/04 | 47775E
S## Cmd Center 1[through 8]
Default: BlankYesWatch tone sounds
at this command
center.
15Sound Watch Tone at
Command Center: This function
sounds the Watch Tone at the
command center address
programmed in Parameter 1. The
Watch Tone sounds at all
command centers with the address
programmed. Press [ESC] to
silence the tone.
Sound Watch Tone defines the
command center address where
the Watch Tone sounds. Enter...

D9412G/D7412G | Program Entry Guide | 5.0 RADXSKEDEN | 110
Bosch Security Systems | 1/04 | 47775E
S## Door 1 [through 8]
Default: NoYesSecure Door #.
19Secure Door: This function
emulates the SECURE? 12345678
command center function for
securing a door.
Selection: Yes or No
Enable the sked to return the doors
programmed Yes to the secured state.NoDo not secure Door
#.
S## Door 1 [through 8]
Default: NoYesLock Door #.
20Lock Door: This function returns
an Unlocked (Function 18) or
Secured (Function 19)...