Barco Slm R12+ Owners Manual

5. Getting Started
The Stand-by Key
When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by. This situation is used when
a projection stop is planned for a longer period.
R5976654 SLM R12+ 27/01/2005
57 

5. Getting Started
58R5976654 SLM R12+ 27/01/2005 

6. Start up of the Adjustment mode
6. STARTUPOFTHEADJUSTMENTMODE
6.1 Start up
Possible paths
There are 3 possible paths to followonce in the Adjustment mode. They are :
• Installation - Installation should be selected if a new input module is installed or a new source is connected to an existing input
module. Also when the projector is relocated in a new configuration.
• Random Access - Random Access should be selected to set up a new source.
• Service - Service should be selected if the user intends to...

6. Start up of the Adjustment mode
When your password is correct, you gain access to the selected item.
When your password is wrong. The error message Invalid password is displayed on the screen. PressEXITto continue and to
return to the adjustment menu.
Factoryprogrammedpassword: 0000
Password remark
When re-entering the Adjustment mode, it will be necessary to enterthe password again when selecting a password protected item.
Changing your password
To change your password, see chapter Service Mode,...

7. Random Access Adjustment Mode
7. RANDOM ACCESS ADJUSTMENT MODE
Overview
• Overview Flow
•PictureServices
• Picture Tuning
• Geometry
• ScenergiX
• Picture in Picture (PiP)
• Save Changes
7.1 Overview Flow
Overview
RANDOM ACCES
ADJUSTMENT MODEPICTURE TUNINGCOLOR TEMPERATURE
GAMMA
COLOR SPACE
NOISE REDUCTION
INPUT BALANCE
FILE SERVICELOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
GEOMETRYSHIFT
SIZE
BLANKING
ASPECT RATIO
SCENERGIX
SIDE KEYSTONE
PIP
SAVE CHANGES
OPTIONS
Image 7-1
R5976654 SLM R12+ 27/01/200561 

7. Random Access Adjustment Mode
Start up
1. Push the cursor key↑or↓to highlightRandom Access.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with↑or↓
then 
 to return
Menu 7-1
2. PressENTER.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
SCENERGIX
PIP
SAVE CHANGES
Select with↑or↓
then 
 to return
Menu 7-2
7.2 Picture Services
7.2.1 File annotation
How a file is built up
The file notation on a menu is built up in different parts. Let us have a...

7. Random Access Adjustment Mode
file loading can be done automatically (see File Options, page 71). Files with a ~ in front of the file name are
temporary files. These files will be deleted when switching to another source.
Possible file Manipulations
The following file manipulations are possible :
• Load : installation of a file for a new source.
• Edit : editing a loaded file to the source specs.
• Rename : renaming a file.
• Copy : copying a file.
• Delete : deleting a file
• Options : way of sorting...

7. Random Access Adjustment Mode
TheLoadmenu displays the corresponding files depending on the installed filter.
LOAD FILE
FILTER LIST [All]
F
ilenameSrcresolutionvideo525.s01 1 675x240i
video525.c01 1 675x240i
video525.c02 1 675x240i
----------------------------
Active file : Video525.c50
Select with↑or↓,→
 to accept
 to return
Menu 7-6
Changing the filter setting
1. Push the cursor key↑or↓highlightfilter list.
2. PressENTERto toggle the annotation between brackets.
[All] : all files that can be loaded...

7. Random Access Adjustment Mode
7.2.5 Edit File
7.2.5.1 Start up
How to start up the Edit menu ?
To start up the EDIT menu :
1. Push the cursor key↑or↓to highlightEdit.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with↑or↓
then 
 to return
Menu 7-9
2. PressENTERto select.
The Edit file adaptation menu will be displayed.
EDIT FILE
F
ilenameSrcresolutionvideo525.s01 1 675x240i
video525.c01 1 675x240i
video525.c02 1 675x240i
-------------------------------
Active file : Video525.c50
Select...

7. Random Access Adjustment Mode
3. Enter directly with the numeric keys on the RCU or local keypad the new value.
How to change a setting with the cursor keys?
1. Push the cursor key↑or↓to highlight an item.
The color of the selected item will change.
2. PressENTERto activate the digits.
3. Push the cursor key←or→to select the changing digit.
4. Push the cursor key↑or↓to scroll to the desired digit.
5. When finished, pressENTERto confirm.
How to change a setting with the cursor keys and counting up or...