Barco Slm R12+ Owners Manual
Have a look at the manual Barco Slm R12+ Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 183 Barco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5. Getting Started The Stand-by Key When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by. This situation is used when a projection stop is planned for a longer period. R5976654 SLM R12+ 27/01/2005 57
6. Start up of the Adjustment mode 6. STARTUPOFTHEADJUSTMENTMODE 6.1 Start up Possible paths There are 3 possible paths to followonce in the Adjustment mode. They are : • Installation - Installation should be selected if a new input module is installed or a new source is connected to an existing input module. Also when the projector is relocated in a new configuration. • Random Access - Random Access should be selected to set up a new source. • Service - Service should be selected if the user intends to change general settings such as password, language, address, etc.or some service actions or get set-up information. How to start up. 1. PressADJUSTorENTERto enter the Adjustment mode. The adjustment mode opens. ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with↑or↓ then to return Menu 6-1 2. The cursor key (RCU) or ’+ or ’-’ keys (local keypad) are used to make menu selections and also for adjustments. 3. TheENTERandEXITkeys are used to move forward and backward through the menu structure. 4. TheADJUSTkey can be used to terminate the adjustment mode while any path selection menu is displayed. 6.2 Password Password protection of some items. Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (Password protection is only available when the password strap onthe controller module is ON, call an authorized service center to change the position of the password strap). Entering your password 1. The first digit position is highlighted. Enter the first digit. PASSWORD ENTER PASSWORD ---- Use numeric keys to return Menu 6-2 The highlighted square jumps to the next position. 2. Continue with the other digits Example: 2319 R5976654 SLM R12+ 27/01/2005 59
6. Start up of the Adjustment mode When your password is correct, you gain access to the selected item. When your password is wrong. The error message Invalid password is displayed on the screen. PressEXITto continue and to return to the adjustment menu. Factoryprogrammedpassword: 0000 Password remark When re-entering the Adjustment mode, it will be necessary to enterthe password again when selecting a password protected item. Changing your password To change your password, see chapter Service Mode, Change Password. 6.3 Menus on Local LCD Display Overview When text is ’off’, no menus will be displayed on the projection screen. But on the local LCD display, it is still possible to scroll through the menus. The menus will be displayed line by line in the same order as they were displayed on the projection screen. Adjustments can be done while the projector is running without projecting the disturbing menus on the screen. Use the cursor keys to scroll through the menus and pressENTERto activate the displayed menu. 60 R5976654 SLM R12+ 27/01/2005
7. Random Access Adjustment Mode 7. RANDOM ACCESS ADJUSTMENT MODE Overview • Overview Flow •PictureServices • Picture Tuning • Geometry • ScenergiX • Picture in Picture (PiP) • Save Changes 7.1 Overview Flow Overview RANDOM ACCES ADJUSTMENT MODEPICTURE TUNINGCOLOR TEMPERATURE GAMMA COLOR SPACE NOISE REDUCTION INPUT BALANCE FILE SERVICELOAD EDIT RENAME COPY DELETE OPTIONS GEOMETRYSHIFT SIZE BLANKING ASPECT RATIO SCENERGIX SIDE KEYSTONE PIP SAVE CHANGES OPTIONS Image 7-1 R5976654 SLM R12+ 27/01/200561
7. Random Access Adjustment Mode Start up 1. Push the cursor key↑or↓to highlightRandom Access. ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with↑or↓ then to return Menu 7-1 2. PressENTER. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY SCENERGIX PIP SAVE CHANGES Select with↑or↓ then to return Menu 7-2 7.2 Picture Services 7.2.1 File annotation How a file is built up The file notation on a menu is built up in different parts. Let us have a look to these parts. Take the following notation : xxxxxxxx.eee n ppppXppppi xxxxxxxxbase name, 8 characters eeefile extension first character C : custom made file first character S : standard file The second and third character is used for a following number (= file index). The file index for custom files : 00 to 63. nsource number ppppXppppactive pixel rating ii or blank i = interlaced file blank = not interlaced Table 7-1 7.2.2 Possible file manipulations Connecting a new source. Before using a new source, a correct file has to be installed. The projector’s memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When there is a little difference, the file can also be loaded and then edited until the source specs are reached. 62 R5976654 SLM R12+ 27/01/2005
7. Random Access Adjustment Mode file loading can be done automatically (see File Options, page 71). Files with a ~ in front of the file name are temporary files. These files will be deleted when switching to another source. Possible file Manipulations The following file manipulations are possible : • Load : installation of a file for a new source. • Edit : editing a loaded file to the source specs. • Rename : renaming a file. • Copy : copying a file. • Delete : deleting a file • Options : way of sorting the files. 7.2.3 Start up Start up To enter the File Service, handle as follow : 1. Push the cursor key↑or↓to highlightFile Service. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY SCENERGIX PIP SAVE CHANGES Select with↑or↓ then to return Menu 7-3 2. PressENTERto select. TheFile Servicemenu will be displayed. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with↑or↓ then to return Menu 7-4 7.2.4 Load file StartupLoadfile To start up the load file, handle as follow : 1. Push the cursor key↑or↓to highlightLoad. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with↑or↓ then to return Menu 7-5 2. PressENTERto select. R5976654 SLM R12+ 27/01/2005 63
7. Random Access Adjustment Mode TheLoadmenu displays the corresponding files depending on the installed filter. LOAD FILE FILTER LIST [All] F ilenameSrcresolutionvideo525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ---------------------------- Active file : Video525.c50 Select with↑or↓,→ to accept to return Menu 7-6 Changing the filter setting 1. Push the cursor key↑or↓highlightfilter list. 2. PressENTERto toggle the annotation between brackets. [All] : all files that can be loaded will be displayed. [Fit] : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration of ± 300 ns, if nothing is found within this small area, the projector continues searching until it finds something). Howtoloadafile? 1. Push the cursor key↑or↓to select the best fitting file. LOAD FILE FILTER LIST [All] F ilenameSrcresolutionvideo525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ---------------------------- Active file : Video525.c50 Select with↑or↓,→ to accept to return Menu 7-7 2. PressENTERto select. A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on. CONFIRM LOAD FILE create file Video525.c02 based on file Video525.s01? to return to return Menu 7-8 3. PressENTERto confirm the new creation orEXITto return to the load file menu. During a load file, the actual file is displayed next to the indicationActive file. When scrolling through the files, the imagewill be adapted according to the settings of the selected file (on line adaptation). The image is not perfect ? If the displayed image is not correct after selecting the best fitting file, go to the Edit menu, select the active file and change the File settings. 64 R5976654 SLM R12+ 27/01/2005
7. Random Access Adjustment Mode 7.2.5 Edit File 7.2.5.1 Start up How to start up the Edit menu ? To start up the EDIT menu : 1. Push the cursor key↑or↓to highlightEdit. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with↑or↓ then to return Menu 7-9 2. PressENTERto select. The Edit file adaptation menu will be displayed. EDIT FILE F ilenameSrcresolutionvideo525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ------------------------------- Active file : Video525.c50 Select with↑or↓,→ to accept to return Menu 7-10 3. Select the file which must be edited (mostly the active file). 4. PressENTER. The file name will be displayed in the upper right corner. EDIT FILE xga.s30 HORIZONTAL TOTAL 1344 PIXELS ACTIVE 1024 PIXELS START 296 PIXELS PERIOD 20.678 µs VERTICAL (FIELD) TOTAL 806 LINES ACTIVE 768 LINES START 36 LINES INTERLACED [OFF] READ AMDS OPTIONS ↑,↓,←,→, Menu 7-11 7.2.5.2 Changing the settings Different methods The 3 different methods to change a setting will be described hereafter. These methods are: • with the numeric keys on the remote control. • with the arrow keys selecting the changing digit. • with the arrow keys counting up or down. How to change a setting with the numeric keys? 1. Push the cursor key↑or↓to highlight an item. The color of the selected item will change. 2. PressENTERto activate the digits. R5976654 SLM R12+ 27/01/2005 65
7. Random Access Adjustment Mode 3. Enter directly with the numeric keys on the RCU or local keypad the new value. How to change a setting with the cursor keys? 1. Push the cursor key↑or↓to highlight an item. The color of the selected item will change. 2. PressENTERto activate the digits. 3. Push the cursor key←or→to select the changing digit. 4. Push the cursor key↑or↓to scroll to the desired digit. 5. When finished, pressENTERto confirm. How to change a setting with the cursor keys and counting up or down? 1. Push the cursor key↑or↓to highlight an item. The color of the selected item will change. 2. PressENTERto activate. 3. Counting up or down by pushing the cursor key←or→. 7.2.5.3 Correct value What is already available during start up? During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are automatically measured and filled in in the menu table. These values will be available when starting up the EDIT procedure of an active file. CAUTION:Do not adjust these settings on an active file, they are used to identify the input source file. How to find the correct values for the item in the Edit file menu? Horizontal Total PixelsIf the value for Horizontal Total Pixels is wrong, sampling mistakes (small vertical bars in the projected image) will be seen in the image. Select Total and adjust the pixel quantity. Adjust for zero bars. hint: if the number of bars increase, adjust in the other direction. Active PixelsThe Active Pixels : determine the width of the window on the screen. This value is normally given in the source specifications. If not, adjust until full image is displayed (no missing pixels). Horizontal Startnumber of pixels between the beginning of the input signal and the start of the video information in the signal. Horizontal Periodalready filled in with the correct value when active file. Vertical Total Linesalready filled when an active file is selected to be edited Active Linesnumber of horizontal lines determining the height of the projected image. This value is normally given in the specification of the source. If not, adjust until full image height is displayed (no missing lines) Vertical Startnumber of lines between the start of the input signal and start of the image on the screen. Interlaced [On] or [Off]this selection is automatically filled when active file has to be edited. If the image is wrong due to mismeasurement, use the ENTER key to toggle between [On] and [Off]. (for interlaced images, 1 frame contains 2 fields). Read AMDSAMDS = automatic mode detection & synchronization During the installation of a file with LOAD, the system automatically measured the horizontal period, the total vertical lines and the interlaced mode. When selecting Read AMDS, the system remeasures the above indicated items. 66R5976654 SLM R12+ 27/01/2005