Barco Slm R12+ Owners Manual

							8. Installation Mode
3. Push the cursor key↑or↓to highlightHighlighted item color.
OSD
HIGHLIGHT ITEM COLOR [red]
MENU POSITION [Default]
Select with↑or↓
then 
 to return
Menu 8-33
4. PressENTERto toggle between Yellow, Red and Blue.
8.11.2 Menu Position
How to change
1. Push the cursor key↑or↓to highlightOSD.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-34
2. PressENTERto select.
3. Push the cursor key↑or↓to highlightMenu Position.
OSD
HIGHLIGHT ITEM COLOR [red]
MENU POSITION [Default]
Select with↑or↓
then 
 to return
Menu 8-35
4. PressENTERto toggle between [DEFAULT] and [CENTER].
DEFAULT menus displayed in the center, adjustment boxes displayed in the corner.
CENTER menus and adjustment boxes displayed in the center of the image.
8.12 Internal Patterns
What can be done with these internal patterns?
The projector is equipped with different internal patterns which can be used for measurement purposes.
R5976654 SLM R12+ 27/01/2005
107 
						

							8. Installation Mode
Available patterns
- Outline
-Hatch
- Color bars
- Multiburst
- Checker board
- Page Char
- Alpha numeric char
How to select an internal patterns?
1. Push the cursor key↑or↓to highlightInternal Patterns.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-36
2. PressENTERto select.
The internal patterns menu will be displayed.
INTERNAL PATTERNS
OUTLINE
HATCH
COLOR BARS
MULTIBURST
CHECKER BOARD
PURITY
PAGE CHAR
ALPHA_NUMERIC CHARS
Select with↑or↓
then 
 to return.
Menu 8-37
108R5976654 SLM R12+ 27/01/2005 
						

							9. Service Mode
9. SERVICE MODE
9.1 Built-up
Built-up
The service menu is built-up in two parts which are connected together with the ’more’ item. If the desired item is not in the list of
the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu.
9.2 Start up
Start up
1. Push the cursor key↑or↓to highlightService.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with↑or↓
then 
 to return
Menu 9-1
2. PressENTERto display the service mode menu.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-2
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with↑or↓
then 
 to return
Menu 9-3
Some items in the Service mode are password protected (when the password function is active). Enter the
password to continue. All other password protected items are now available if you stay in the adjustment
mode.
9.3 Identification
What can be seen on the identification screen?
The identification screen shows the general information of the projector.
R5976654 SLM R12+ 27/01/2005
109 
						

							9. Service Mode
The following items will be displayed:
• Type of projector: SLM R12+
• Software version
• Network module: yes
• Proj. address: To change the address of the projector, see Change Projector Address, page 114
Installation:
- front/ceiling
- front/table
- rear/ceiling
- rear/table
• Baud rate: transfer speed for communication with an IBM PC (or compatible) or MAC. The baud rate of the projector must be
the same as the baud rate of the connected computer. When there is a difference, consult ’Change Baudrate PC’ in this chapter.
• Projector Run Time: gives the total run time since the first start up. All projectors leave the factory with a run time of approxi-
mately 24 hours.
• Projector Serial number: indicates the fabrication number of the projector. This number can be useful when calling for technical
assistance.
Start Up
1. Push the cursor key↑or↓to highlightIdentification.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-4
2. PressENTERto display the Identification screen.
SLM R12+
Proj. address: 001
Soft. version: 3.0
Config: front/ceiling
Bautrate PC: 9600
Network module: yes
Text: on
Serial No:1010200
Run time: 100 h
Select with↑or↓
then 
 to return.
Menu 9-5
9.4 Password
Overview
• Change Password
• Access Control List
9.4.1 Change Password
How to enable or disable the password function ?
This item is password protected when the password strap is installed.
The password function is enabled when the password strap, second switch of S2 on the controller module is installed. Consult an
authorized Barco service technician to change the strap position.
About password types.
3 different password levels are built in, in the projector software.
110
R5976654 SLM R12+ 27/01/2005 
						

							9. Service Mode
The different levels are:
• owner
•user
• guest
Depending on your password level some password protected items are accessible and others not. The owner (which has the highest
level) can set up via the ’Access control list’ the accessibility of the different items. See ’Access Control List’.
Get access to the controller module
1. Power down the projector and disconnect the power cord from the wall outlet.
2. Loosen the indicate screws of the input box.
Image 9-1
Image 9-2
Access password switch
3. Pull out the input box by both handlers.
4. When a metal top cover of the box is mounted, remove first by turning out the screws.
Image 9-3
Metaltopcover
5. When looking inside the box, the controller module with the switches is situated in the middle of the box.
Image 9-4
R5976654 SLM R12+ 27/01/2005111 
						

							9. Service Mode
6. Change the position of S2.
How to change the password ?
1. Push the cursor key↑or↓to highlightChange Password.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-6
2. PressENTERto display theChange Passwordmenu.
Note:Only possible when Owner.
CHANGE PASSWORD
Enter new password
OWNER 0000
USER 0000
GUEST 0000
ACCESS CONTROL LIST
Select with↑or↓
then 
Reprogram with↓,↑,←or→
or numeric keys
 to confirm
 to return
Menu 9-7
The old passwords are displayed.
3. Push the cursor key↑or↓to highlight the password which must be changed.
4. PressENTERto select.
Enter the new password with the numeric keys of the RCU or local keypad.
5. Select the next password or pressENTERto save the changes.
PressEXITto return without saving the new passwords.
9.4.2 Access Control List
What is possible?
In the access control list the owner can set up the access possibilities for the user and the guest.
Set up of an Access Control List.
1. Push the cursor key↑or↓to highlight Change Password.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-8
112R5976654 SLM R12+ 27/01/2005 
						

							9. Service Mode
2. PressENTERto display the Change password menu.
Note:Only possible when Owner.
CHANGE PASSWORD
Enter new password
OWNER 0000
USER 0000
GUEST 0000
ACCESS CONTROL LIST
Select with↑or↓
then 
Reprogram with↓,↑,←or→
or numeric keys
 to confirm
 to return
Menu 9-9
3. Push the cursor key↑or↓to highlightAccess Control List.
4. PressENTERto display the Access Control List menu.
ACCESS CONTROL LIST
M
enuOUGEAdj modeYYYY
BARCO LOGOY---
Change addYY--
O=owner, U=user, G=Guest
E=everybody
Select with↑or↓
then 
 to return.
Menu 9-10
For each item an access possibility can be set for owner, user, guest or everybody.
Changing an access possibility
1. Push the cursor key↑or↓to select an item in the scroll list.
2. PressENTERto select.
3. Push the cursor key←or→to select owner, user, guest or everybody.
4. PressENTERto toggle between Y(yes) or N(no).
5. Repeat both steps if necessary.
Access Levels
An access level can be added to the following items:
• Adjustment mode
• Barco logo
• Change projector address
• File delete
• File delete all
• Input balance
• Installation
• Random access
• Serial communication
•Service
R5976654 SLM R12+ 27/01/2005
113 
						

							9. Service Mode
9.5 Changing Language
Start up
1. Push the cursor key↑or↓to highlightChange Language.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-11
2. PressENTERto display theChange Languagemenu.
CHANGE LANGUAGE
ENGLISH
Select with↑or↓
then 
 to return
Menu 9-12
3. Push the cursor key↑or↓to highlight the desired language.
4. PressENTERto change the language.
Available languages: English
9.6 Change Projector Address
How to change the projector address?
1. Push the cursor key↑or↓to highlightChange Proj Address.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-13
2. PressENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in.
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with↑or↓
then 
Reprogram with↑,↓,←,→
or numeric keys
 to confirm
 to return.
Menu 9-14
114R5976654 SLM R12+ 27/01/2005 
						

							9. Service Mode
3. Push the cursor key↑or↓to highlightProjector address.
4. PressENTERto activate.
The first digit will be highlighted.
5. Reprogram the address with↑,↓,←,→keys
Use the↑or↓key to select a new value, use the←or→key to select a new digit.
Or,
use the numeric keys on the RCU to enter the new address.
The address must be between 0 and 9 when controlling the projector with the RCU or
between 0 and 255 when controlling the projector via RS232.
How to change the common address
1. Push the cursor key↑or↓to highlightChange Proj Address.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-15
2. PressENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in.
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with↑or↓
then 
Reprogram with↑,↓,←,→
or numeric keys
 to confirm
 to return.
Menu 9-16
3. Push the cursor key↑or↓to highlightCommon address.
4. PressENTERto activate.
The address digit will be highlighted.
5. Select 0 or 1 with the↑or↓keys
Or,
enter the new value with the numeric keys.
9.7 Serial Communication
Overview
• Start Up of the Serial Communication
• Baud rate Setting
• Setting up the Interface Standard
• RS422 Termination
R5976654 SLM R12+ 27/01/2005
115 
						

							9. Service Mode
9.7.1 Start Up of the Serial Communication
Start up
1. Push the cursor key↑or↓to highlightSerial communication.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with↑or↓
then 
 to return
Menu 9-17
2. PressENTERto display the Serial Communication menu.
SERIAL COMMUNICATION
PROJECTOR ADDRESS 001
BAUDRATE [115200]
INTERFACE STANDARD [RS232]
RS422 TERMINATION [ON]
Select with↑or↓
then 
 to return
Menu 9-18
9.7.2 Baud rate Setting
Set up
To change the baud rate, handle as follow:
1. Push the cursor key↑or↓to highlightBaudrate.
SERIAL COMMUNICATION
PROJECTOR ADDRESS 001
BAUDRATE [115200]
INTERFACE STANDARD [RS232]
RS422 TERMINATION [ON]
Select with↑or↓
then 
 to return
Menu 9-19
The actual baud rate will be displayed.
2. PressENTERto toggle between the available baudrates.
Default : 9600
Available baud rates.
115200/57600/38400/19200/9600/4800/1200
116
R5976654 SLM R12+ 27/01/2005