Barco Slm R12+ Owners Manual

							9. Service Mode
FIB
Formatter interface board
How to select?
1. Push the cursor key↑or↓to highlightI2C.
DIAGNOSIS
I2C
DMD
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with↑or↓
then 
 to return
Menu 9-40
2. PressENTERto select.
The I2C Diagnosis overview will be displayed.
If the indication behind the hex code is green, everything is ok.
If the indication is red, something is wrong with that indicated address.
I2C DIAGNOSIS
MOTOR DRIVER 1AH ###
LIGHT SENSOR 1CH ###
LPS 20H ###
SMPS 30H ###
FIB 34H ###
Red DMD 34H ###
Green DMD 36H ###
Blue DMD 38H ###
PMP 4AH ###
Select with↑or↓
 to return.
Menu 9-41
9.15.3 DMD
How to select the overview?
1. Push the cursor key↑or↓to highlightDMD.
DIAGNOSIS
I2C
DMD
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with↑or↓
then 
 to return
Menu 9-42
2. PressENTERto select.
An overview of the working of the DMD’s will be displayed.
DMD
STATUS RED OK
STATUS GREEN OK
STATUS BLUE OK
 to return.
Menu 9-43
R5976654 SLM R12+ 27/01/2005127 
						

							9. Service Mode
9.15.4 SMPS
How to select the overview?
1. Push the cursor key↑or↓to highlightSMPS.
DIAGNOSIS
I2C
DMD
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with↑or↓
then 
 to return
Menu 9-44
2. PressENTERto select.
The SMPS overview menu will be displayed.
SMPS
µC VERSION 03.01
EEPROM VERSION 03.00
Internal T. 26(45)C
NTC T. 38(80)C
Internal temp. OK
NTC OK
TILT SWITCH OK
MICRO SWITCH OK
LAMP TEMP OK
LPS MAINS OK
SMPS OUTPUT OK
 to return
Menu 9-45
9.15.5 LPS (lamp power supply)
How to select the overview?
1. Push the cursor key↑or↓to highlightLPS.
DIAGNOSIS
I2C
DMD
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with↑or↓
then 
 to return
Menu 9-46
2. PressENTERto select.
TheLPSoverview menu will be displayed.
LPS1
µC Version 02.01
EEPROM Version 01.11
Internal T. 029(075)C
Rectifier T. 037(105)C
Heats. PFC T. 029(100)C
Heats. LPS T. 028(100)C
Trafo T. 032(105)C
I2C OK
 to return
Menu 9-47
128R5976654 SLM R12+ 27/01/2005 
						

							9. Service Mode
9.15.6 Voltages
How to select the overview?
1. Push the cursor key↑or↓to highlightVoltages.
DIAGNOSIS
I2C
DMD
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with↑or↓
then 
 to return
Menu 9-48
2. PressENTERto select.
Thevoltageoverview window will be displayed.
VOLTAGES
FAN1 VOLTAGE 14V OK
FAN2 VOLTAGE 14V OK
FAN3 VOLTAGE 17V OK
15 VOLT 14V OK
30 VOLT 29V OK
12 VOLT 12V OK
5 VOLT 5.0V OK
3.3 VOLT 3.1V OK
 to return
Menu 9-49
9.16 Factory defaults
What is possible ?
The projector will set all settings to the factory defaults which are by default stored in the projector. All custom settings will be deleted
and the custom files will be removed.
Howtoreturntothefactorydefaults?
1. Push the cursor key↑or↓to highlightFactory defaults.
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with↑or↓
then 
 to return
Menu 9-50
2. PressENTERto select.
TheFactory defaultsconfirmation and warning menu will be displayed.
FACTORY DEFAULTS
ARE YOU SURE ?
THIS WILL OVERWRITE
ALL CUSTOM SETTINGS
AND DELETE ALL
CUSTOM FILES.
RETURN
CONTINUE
Select with↑or↓
then 
 to return
Menu 9-51
R5976654 SLM R12+ 27/01/2005129 
						

							9. Service Mode
3. Are you sure to restore the factory defaults ?
If yes, press the cursor key↑or↓to highlightContinue.
A message will be displayed.
Factory defaults
Please wait
Remaining time:xsec
Menu 9-52
If no, press the cursor key↑or↓to highlightReturn.
Restoring the factory defaults can take a while. When finished, the projector will automatically reboot and
those factory settings will be loaded.
130R5976654 SLM R12+ 27/01/2005 
						

							10. Programmable Function Keys
10. PROGRAMMABLE FUNCTION KEYS
10.1 Function Keys
What can be done with these keys?
The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any
adjustment menu.
How can a function key be programmed?
A function key can only be programmed when in the adjustment mode. Handle as follow :
1. Scroll through the menus until the desired menu is reached.
2. Press the desired function key for this menu during a few seconds.
A confirmation menu will be displayed :   will be used to quickly access this menu.
CONFIRM
QUICK ACCESS
 will be used
to quickly access
this menu.
 to confirm
 to cancel
Menu 10-1
R5976654 SLM R12+ 27/01/2005131 
						

							10. Programmable Function Keys
132R5976654 SLM R12+ 27/01/2005 
						

							A. Standard Source set up Files
A. STANDARD SOURCE SET UP FILES
A.1 Table overview
Table overview
The following standard source files are pre-programmed in the projector.
Name1Resolu-
tion2Fvert
Hz
3
FHor
kHz
4
Fpix
MHz
5
Ptot6Pact7Ltot8Lact9
1600_48V1600x600i48,04062,500135,00021601600651600
1600_60V1600x120060,00075,000162,0002160160012501200
1600_65V1600x120065,00081,250175,5002160160012501200
1600_70V1600x120070,00087,500189,0002160160012501200
8514_A1024x384i43,47935,52244,90012641024409384
CGA640x20059,92415.70014.318912640262200
COMPUSC41024x480i29,94530,69439,77912961024512480
DVI_LOOP1400x105056,00563,902107,8661688140011411050
ED735x48059,94331,47028,638910735525480
EGA640x35059,70221,85116,257744640366350
EWS_501280x102450,00052,35087,9481680128010471024
EWS_601280x102460,00063,900107,3521680128010651024
EWS_60V1280x102460,28263,657110,0001728128010561024
EWS_721280x102472,00076,968130,0761690128010691024
EWS_751280x102475,02579,976135,0001688128010661024
FMR640x400i42,32336,44028,570784640431400
FMTO_2640x40055,37024,37021,056864640440400
HD_24P1920x108024,00027,00074,2502750192011251080
HD_24SF1920x54048,04327,00074,25027501820562540
HD_25I1920x540I25,00028,12574,25026401920563540
HD_25P1920x108025,00028,12574,2502640192011251080
HD_30I1920x540I30,00033n75074,2502001920563540
HD_30I_21920x517I30,00033,75074,25022001920563517
HD_30P1920x108030,00033,75074,2502200192011251080
HD_60P1920x72060,00045,00074,25016501280750720
HDMAC1252x570i25,02031,25039,12512521024625570
1. Name: name of file, contains the settings.
2. Resolution: image resolution, when followed by ..i means interlaced.
3. Fvert Hz: vertical frame frequency of the source
4. FHor kHz: horizontal frequency of the source
5. Fpix MHz: pixel frequency
6. Ftot : total pixels on one horizontal line.
7. Pact: active pixels on one horizontal line.
8. Ltot: total lines in one field
9. Lact: active lines in one field.
R5976654 SLM R12+ 27/01/2005133 
						

							A. Standard Source set up Files
Name1Resolu-
tion2Fvert
Hz
3
FHor
kHz
4
Fpix
MHz
5
Ptot6Pact7Ltot8Lact9
INTER_GR1184x88667,17061,79692,94115041184920886
MAC_2640x48066,66735,00030,240864640525480
MAC_3512x38460,14724,48015,667640512407384
MAC_4560_38460,14724,48017,234704560407384
MAC_5512x34260,15822,25916,670704512370342
MAC_6832x62474,54649,72257,2801152832667624
MAC_71024x76874,90760,15080,00013301024803768
MAC_LC640x48066,61934,97531,338896640525480
MAC_POR640x87074,99668,84657,280932640918870
MUSE1172x518i30,00033,75037,12511721024563518
MXGA_701152x86470,01463,85394,50214801152912864
MXGA_751152x86474,99967,499107,99916001152900864
MXGA_851152x86485,00077,095121,50215761152907864
PAM500640x40060,00026,40022,810864640440400
PAM8001120x375i44,93636,44350,00013721120406375
PC98_1640x40056,41624,82321,050848640440400
PC98_21120x375i39,99432,83547,84014571120411375
PC98_31120x75060,00050,00078,56915711120833750
S1152_661152x90066,00461,84694,50015281152937900
S1152_761152x90076,63771,809108,00015041152937900
S1600_671600x128066,93189,286200,0002240160013341280
SDI_625675x278125,00015,62513,500864720313278
SDI_525675x240129,97015,73413,500858720263240
SG_501600x120050,00062,500130,3132085160012501200
SG_60_11280x102460,00263,902107,3551680128010651024
SG_60_21024x76860,00048,78064,39013201024813768
SG_60_3960x68060,00043,20054,4321260960720680
SG_60_41600x120060,00075,000156,3752085160012501200
SUNEWS671280x102467,18971,691117,0001632128010671024
SUNEWS761280x12476,10781,130135,0001664128010661024
SUNXGA601024x76859,98448,28764,12513281024805768
SUNXGA701024x76870,04156,59674,25013121024808768
134R5976654 SLM R12+ 27/01/2005 
						

							A. Standard Source set up Files
Name1Resolu-
tion2Fvert
Hz
3
FHor
kHz
4
Fpix
MHz
5
Ptot6Pact7Ltot8Lact9
SUNXGA771024x76877,06962,04084,37513601024805768
SUP_MAC1024x76860,00048,78063,99913121024813768
SVGA_56V800x60056,25035,15636,0001024800625600
SVGA_60V800x60060,31737,87940,0001056800628600
SVGA_72V800x60072,08448,08050,0031040800667600
SXGA+_11400x105059,94563,902107,8661688140010661050
SXGA+_21400x105083,85491,149171,3611880140010871050
VGA_72V640x48072,80037,85631,496832640520480
VGA_GR640x48059,94131,46925,175800640525480
VGA_TXT720x40070,08731,46928,322900720449400
VGA75ISO640x48075,00039,37531,500800640525480
VID525_21024x24030,02715,73420,14012801024262240
VID625_21024x27824,96015,62520,00012801024278313
VIDEO5251302x239i29,97015,73432,20713021024263239
VIDEO6251024x278i25,00015,62531,98413101024313278
VWSCP_501280x102449,10952,35188,3681688128010661024
VWSCP_601280x102472,00276,970129,3101680128010691024
XGA_601024x76860,00048,36064,99613441024806768
XGA_701024x76870,00057,05078,04413681024815768
XGA_70V1024x76869,70556,18274,61013281024806768
XGA_721024x76871,95558,14080,00013761024808768
XGA_751024x76875,78161,08086,00014081024806768
XGA75_GS1024x76874,53459,70179,28413281024801768
Table A-1
R5976654 SLM R12+ 27/01/2005135 
						

							A. Standard Source set up Files
136R5976654 SLM R12+ 27/01/2005