Barco Slm R12+ Owners Manual

4. Connections
4.5.4 Fixed slot (slot 1 & 2)
Where to find?
Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through
to a second projector. Within the installation mode it is possible to setup the input for 5 cable or DVI (PanelLink).
Which signals can be connected to slot 1 & 2?
Connector name/
Input signalRGBHV
RGBHVRGBHV
RGBSRGBS-
RGsBRGsB--
Composite Video-Video---
Super Video-Y--C
Component Video — SSR-YYB-YS-
Component Video...

4. Connections
3. PressENTER.
4. Press the cursor key↑or↓to selectInput Slots.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 4-5
5. PressENTER.
The internal system will scan the inputs and displays the result in theInput Slotsmenu.
6. Push the cursor key↑or↓to select the first or second slot.
INPUT SLOTS
Slot Module type [config]
1. RGB-SS [CV]
2. RGB-SOG...

4. Connections
How to connect ?
1. Connect the output of your SDI source to the input BNC of the SDI input.
OUT IN OnR9840450
HD SDI DIGITAL MODULE
OUT IN On9840110
SDI DIGITAL INPUT
COMM PORTTRIGGER OUT
RS232/422 OUT
RS232/422 INIR-Receiver Diagnostic Code
Green Operation
Red Stand-by
IR Sync OK
Hardwired
remote
CTRL 1 Hardwired
remote
CTRL 2 Two way
hardwired
remote
CTRL 3
OnOn
OnOn
DIGITAL VIDEO SOURCE
DigitalVideo
DVI INPUT
DVI INPUT
DVI OUTPUT High Bandwidth  5 CABLE INPUT
High Bandwidth  5 CABLE...

4. Connections
OUT IN OnR9840450
HD SDI DIGITAL MODULE
OUT IN On9840110
SDI DIGITAL INPUT
COMM PORTTRIGGER OUT
RS232/422 OUT
RS232/422 INIR-Receiver Diagnostic Code
Green Operation
Red Stand-by
IR Sync OK
Hardwired
remote
CTRL 1 Hardwired
remote
CTRL 2 Two way
hardwired
remote
CTRL 3
OnOn
OnOn
DIGITAL VIDEO SOURCE
DigitalVideo
DVI INPUT
DVI INPUT
DVI OUTPUT High Bandwidth  5 CABLE INPUT
High Bandwidth  5 CABLE INPUTRGBH/C V
RGBH/C V
Image 4-6Note:The input is always 75Ωterminated.
2. If loop through is...

4. Connections
OUT IN OnR9840450
HD SDI DIGITAL MODULE
PRPB On
COMM PORTEthernet 
RS232/422 OUT
RS232/422 INIR-Receiver Diagnostic Code
Green Operation
Red Stand-by
IR Sync OK
Hardwired
remote
CTRL 1 Hardwired
remote
CTRL 2 Two way
hardwired
remote
CTRL 3
OnOn
OnOn
DVI INPUT
DVI INPUT
DVI OUTPUT High Bandwidth  5 CABLE INPUT
High Bandwidth  5 CABLE INPUTRGBH/C V
RGBH/C V
DIGITAL VIDEO DECODER
S-Video 
Y/Vid
123Image 4-71 Component video input
2 Composite Video input
3 S-Video input
How to select the...

4. Connections
6. Push the cursor key↑or↓to select the third or fourth slot.
INPUT SLOTS
Slot Module type [config]
1. RGB-SS [CV]
2. RGB-SOG
3. SDI
4. SDI
______________
1. DVI OUTPUT [DVI input]
Select with↑or↓
then 
 to return
Menu 4-9
7. PressENTERto toggle.
Possible indications on the input slot menu.
- VIDEO[VDEO]
- VIDEO[S-VIDEO]
- VIDEO[YUV]
4.6 Communication Connections
Overview
• RS232 (RS422) Connection
• Linked System
• Communication with peripherals
• Network connection
4.6.1 RS232 (RS422)...

4. Connections
456789 123
456789 1
Pin Number Pin NumberDB9
Female
Connector
DB9
Female
Connector23
Image 4-8
Make a Custom Null Modem Cable
2. Use the Custom Null Modem Cable to connect the COM 800 port of the master-projector to the ’To Switcher’ port on the frontside
of the COM 800 Splitter.
R5976654 SLM R12+ 27/01/2005
43 

4. Connections
To next COMM 800 Splitter
COM 800 Splitter 1 (R9827941)Front
Slave 1
TO SWITCHER
COMM 800 Splitter
To Slave 2To Slave 3
Custom Null Modem Cable
TO IR RECEIVER
Front
Slave 4
To Slave 5To Slave 6
TO SWITCHER
COMM 800 SplitterTO IR RECEIVER
BackTO PROJ.1TO PROJ.2TO PROJ.3TO PROJ.4
BackTO PROJ.1TO PROJ.2TO PROJ.3TO PROJ.4
COM 800 Splitter 2
Two Way
hardwired
remoteHardwired
remote
Hardwired
remote
10(/100)BASE-T RS 232/422 IN RS 232/422 OUT COMM PORT
Read instructionsbefore
connecting...

4. Connections
4.6.3 Communication with peripherals
What is possible with an RCVDS05 connected.
• Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS’s are linked via the expansion module.
• Serial communication with the projector.
• Remote control buttons on the RCVDS to control theprojector (source selection and analog settings).
• Theselectedsourcenumberwillbedisplayedona2digitdisplayandtheselectedinput module will be indicated with a LED
on the rear.
For more information about the use of the...

4. Connections
OUT IN OnR9840450
HD SDI DIGITAL MODULE
OUT IN On9840110
SDI DIGITAL INPUT
COMM PORTTRIGGER OUT
RS232/422 OUT
RS232/422 INIR-Receiver Diagnostic Code
Green Operation
Red Stand-by
IR Sync OK
Hardwired
remote
CTRL 1 Hardwired
remote
CTRL 2 Two way
hardwired
remote
CTRL 3
OnOn
OnOn
DVI INPUT
DVI INPUT
DVI OUTPUT High Bandwidth  5 CABLE INPUT
High Bandwidth  5 CABLE INPUTRGBH/C V
RGBH/C V
Ethernet 
connection
Image 4-10
Always use an Ethernet cable with ferrite core to connect the projector to...