Barco Slm R12+ Owners Manual

2. Packaging and Dimensions
2. PACKAGING AND DIMENSIONS
Overview
• Projector Packaging
• Box Content
• Lamp Packaging
• Lens Packaging
• Projector Dimensions
2.1 Projector Packaging
Way of Packaging
The projector is packed in a carton box. To provide protection during transportation, the projector is surrounded with foam. The
package is secured with banding and fastening clips.
To unpack
1. Release the fastening clips.
2. Remove the banding. Handle as shown in the drawing.
PULL
TO OPE
Image 2-1
3. Take...

2. Packaging and Dimensions
Save this carton box , it can be used to repack the lamp when you ever have to transport your projector.
2.4 Lens Packaging
Way of Packaging
Lenses are supplied as an individual item.
They are packed in a carton.
2.5 Projector Dimensions
Overview
• Projector Dimensions
• Projector Dimensions (Inclusive Dust Filters)
2.5.1 Projector Dimensions
Dimensions
The value of the projector dimensions is indicated in mm.
Conversion to inches: 24.5 mm = 1 mm
372,7466
83373
045664,5520,5...

2. Packaging and Dimensions
Image 2-3
Side view dimensions
2.5.2 Projector Dimensions (Inclusive Dust Filters)
Projector Front View
The value of the projector dimensions is indicated in mm.
Conversion to inches: 24.5 mm = 1 mm
Air OUTIR-receiver
Image 2-4
Projector front view dimensions
Projector Top View
The value of the projector dimensions is indicated in mm.
Conversion to inches: 24.5 mm = 1 mm
R5976654 SLM R12+ 27/01/2005
9 

2. Packaging and Dimensions
Image 2-5
Projector top view dimensions
Projector Side View
The value of the projector dimensions is indicated in mm.
Conversion to inches: 24.5 mm = 1 mm
Image 2-6
Projector side view dimensions
10R5976654 SLM R12+ 27/01/2005 

3. Installation Guidelines
3. INSTALLATION GUIDELINES
The engines are non sealed versions.
3.1 General
WARNING:Before installing the projector, read first the safety instructions.
Ambient Temperature Conditions.
Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to
the optimum use of the projection system.
Max. ambient temperature : 35°C or 95 °F
Min. ambient temperature : 10 °C or 50 °F
The projector will not operate if...

3. Installation Guidelines
Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a determined amount
of light projected toward them. The ‘GAIN’ of a screen is the term used. Front and rear screens are both rated in terms of gain.
The gain of screens range from a white matte screen with a gain of 1 (x1) to a brushed aluminized screen with a gain of 10 (x10)
or more. The choice between higher and lower gain screens is largely a matter of personal...

3. Installation Guidelines
Table mounted, front projection, second way.
Screen
PD
B
Floor Projector
CD
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
TOP VIEW
SW
Floor
Table/Top side facing floor
A
CD = SH/2 + B + A - 554mm
Image 3-2
Table mounted configuration up side down
Ceiling mounted, front projection
Screen PDB Ceiling
Projector
CD
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
CEILING VIEW
SW
Ceiling
Ceiling/Top side facing floor
A
CD = SH/2 + B - A
Image 3-3...

3. Installation Guidelines
Ceiling mounted, front projection, second way.
Screen
PDB Ceiling
Projector
CD
SH Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
CEILING VIEW
SW
Ceiling
Ceiling/Top side facing ceiling
A
CD = SH/2 + B + A - 554mm
Image 3-4
Ceiling mounted projector
3.3 Safety Area around projector
Safety area
Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave a safety area A
of about 1 meter on the left and the...

3. Installation Guidelines
A
Image 3-5
Safety area around the projector
R5976654 SLM R12+ 27/01/200515 

3. Installation Guidelines
3.4 Projector tilting
Turning around the projection axes
(E) FRONT VIEW
(D)Lamp
Axis
15° 15°
(C) Start point
Image 3-6
Tilting diagram
A Allowed Projector Tilting Area
B Forbidden Projector Tilting Area
C Start point
D Lamp axis
EFrontview
Consider the starting point at the lamp side (input side), the following tilting is possible :
• Maximum 15° upwards
• Maximum 195° downwards (indicated by the allowed projector tilting area)
Forwards and backwards tilting
Forwards and...