Barco Slm R12+ Owners Manual

8. Installation Mode
If no 800 peripheral indication is made on the menu, there are still two possibilities, no RCVDS or VS05 connected or RCVDS is
switched off.
When a 800 peripheral is connected to the projector, the input slots are not accessible with the cursor key to toggle their function.
8.3 800 peripheral
Overview
• Defining the output module of the RCVDS05.
• Defining the Infrared Communication protocol
• CLO using Comm 800
8.3.1 Defining the output module of the RCVDS05.
Which module are...

8. Installation Mode
Defining the communication protocol.
1. Push the cursor key↑or↓to highlight800 Peripheral.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-7
2. PressENTERto select.
3. Push the cursor key↑or↓to highlightInfrared.
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
CLO USING COMM800 [YES]
INFRARED [PPM]
Select with↑or↓
then 
 to return
Menu 8-8
4....

8. Installation Mode
8.4 Source Switching
Switching from one source to another.
To minimize undesired effects when switching from one source to another one can use the Seamless switching mode, beside Seam-
less switching there is a choice between several effects which render the transitions more enjoyable.
How to select a switching mode
1. Push the cursor key↑or↓to highlightSource Switching.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION...

8. Installation Mode
8.5.1 Changing the Background Color
How to change ?
1. Push the cursor key↑or↓to highlightNo signal.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-12
2. PressENTERto select.
The no signal menu will be displayed.
NO SIGNAL
COLOR [Blue]
SHUTDOWN [off]
Shutdown time: 5 min
Select with↑or↓
then 
 to return
Menu 8-13
3. Push the cursor...

8. Installation Mode
4. PressENTERto toggle between [On] or [Off].
8.5.3 Changing the Shutdown Time
Range
The shutdown time can be set between 5 min. and 60 min.
How to change ?
To set up the shutdown time, handle as follow:
1. Push the cursor key↑or↓to highlightNo Signal.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-16
2. PressENTERto select.
The no...

8. Installation Mode
To change the Contrast Enhancement value
1. Push the cursor key↑or↓to highlightContrast Enhancement.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-18
2. PressENTERto select.
The contrast enhancement menu will be displayed.
CONTRAST ENHANCEMENT
NORMAL CONTRAST
HIGH CONTRAST
Select with↑or↓
then 
 to return
Menu 8-19
3. Push the cursor...

8. Installation Mode
2. PressENTERto select.
The following message will be displayed : “Convergence is reserved to qualified service personnel.”
WARNING
CONVERGENCE
is reserved to
qualified
service personnel
 to accept
 to return
Menu 8-22
8.8 Configuration
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/table
Set up the Correct Configuration
1....

8. Installation Mode
How to start up.
1. Push the cursor key↑or↓to highlightLens.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-24
2. PressENTERto select.
The lens menu will be displayed.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
Select with↑or↓
then 
 to return
Menu 8-25
How to Zoom/Focus ?
1. Push the cursor key↑or↓to select Zoom/Focus.
LENS ADJUSTMENT...

8. Installation Mode
3. Push the cursor key↑or↓to shift the image up or down and←or→to shift the image left or right.
4. When finished, pressEXITto go to the lens adjustment menu or pressENTERto go to the zoom/focus function.
Press the selection key * to switch to another pattern. Different patterns are available.
Options
The zoom/focus and shift can be set the same for all files.
1. Push the cursor key↑or↓to highlightOptions.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
Select with↑or↓
then 
 to return
Menu...

8. Installation Mode
How to get an overview.
1. Push the cursor key↑or↓to highlightQuick Access Keys.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with↑or↓
then 
 to return
Menu 8-30
2. PressENTERto select.
The Quick Access Overview menu will be displayed.
QUICK ACCESS KEYS
 :
 :
 :
 :
 :
 : LENS ADJUSTMENTS
 : PiP SOURCE
CLEAR ALL
Select with↑or↓
then 
 to return.
Menu 8-31
 starts up...