Amanda Work Group Installation Manual

							Chapter 10: Configuring Amanda 99
31)  What language should Amanda 
use for prompts, such as “Please 
hold…?”
(You can offer information in more 
than one language, ask for details.)ENGLISH
SPANISHIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
General Defaults.
Amanda parameter is 
prompt_filePress F2 and select a language from 
the drop down list in the Language list 
box. ENGLISH is the default. If you 
do not select English, you must also 
install the prompts for the language.
32)  Will Amanda be connected to a 
printer so that you can print reports?YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
General Defaults.
Amanda parameter is 
lpt_portSet the Printer Attached To LPT value 
to 1.
NOSet the Printer Attached To LPT value 
to 0, which is the default.
33)  Do you want to shut down 
Amanda for disk maintenance and/
or tape backups?YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
General Defaults.
Amanda parameter is 
shutdownSet the Shutdown For Maintenance 
And Backups check box to T for True.
NOSet the Shutdown For Maintenance 
And Backups check box to F for False.
34)  If YES to 33), do you want 
Amanda to shutdown once a week 
or everyday?WEEKLY
Write a day 
and a time.In the Setup utility, select
System Configuration 
Options→
General 
Configuration→
General Defaults.
Amanda parameter is 
shutdownSelect the Once A Week On [TUE] At 
[01:30] option. The default is Tuesday 
at 1:30 A.M.. You can specify a differ-
ent day from the TUE drop down list 
box. You can enter a different time in 
the 01:30 text box. Time value uses the 
24-hour format (HHMM).
DAILY
Write down 
the time. Select the Everyday at  op-
tion and enter the time at HHMM, us-
ing the 24-hour format.
35)   What words do you want the 
screen saver to display on the 
Amanda computer? 
(Write the words. The default is 
“Buy more Amandas.)Write a phrase.In the Setup utility, select
System Configuration 
Options→
General 
Configuration→
General Defaults.
Amanda parameter is
advertisingAt the Screen Saver Phrase text box, 
enter the phrase. Recommended 
length is up to 30 characters, but max-
imum length is 80.
Standalone Questionnaire  (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							100 Installing [email protected]/DOS
36) When users don’t delete mes-
sages, they accumulate. Do you 
want to get rid of messages that have 
been listened to and have been 
around for a long time?
Be aware that deleted messages are 
gone forever.YESIn the Setup utility, select
System Configuration 
Options→
Advanced
Configuration→
General (Settings).
Amanda parameter is
purgeSee Action for Question 37.
NOSet Amanda parameter purge 
to 0, 
which is the default.
37)  If YES to 36, write a number of 
days (from 1 to 99) after which a 
message that has been heard should 
be deleted.Write a num-
ber (1-99).In the Setup utility, select
System Configuration 
Options→
Advanced 
Configuration→
General (Settings).
Amanda parameter is
 purgeSet purge 
to x
, where x is the num-
ber of days (1-90) after being heard 
that a message is purged.
Standalone Questionnaire  (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							Chapter 10: Configuring Amanda 101
37)  Do you want to use the hold 
music provided by The Amanda 
Company or hold music and mes-
sages of your own?The Amanda 
CompanyN/AAmanda plays C:\AMAN-
DA\HOLD.VOX by default.
YOUR OWNThere is no config option or mailbox 
field for this. 
To rerecord HOLD.VOX:
1. Shut down Amanda. 
2. At the DOS prompt (C:\AMAN-
DA), type:
COPY HOLD.VOX MU-
SIC.VOX
so you can use this file later. If 
you already have a MU-
SIC.VOX file, use another 
name.
3. Restart Amanda.
4. Using the telephone, log in to 
the system administrator mail-
box (999), select 8 for the Sys-
tem Administration menu, then 
3 to record the busy-hold music. 
5. Make your recording. It be-
comes the file C:\AMAN-
DA\HOLD.VOX and is played 
by Amanda to callers on hold.
6. If you create HOLD0.VOX, 
HOLD1.VOX, etc. Amanda 
plays them after HOLD.VOX if 
the extension remains busy. 
Each one is created as 
HOLD.VOX, and must be 
changed to HOLDx.VOX with a 
DOS command:
COPY HOLD.VOX 
HOLDx.VOX
Do the recording for the real 
HOLD.VOX (the first music/
message the caller hears) last.
Standalone Questionnaire  (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							102 Installing [email protected]/DOS
Voice Server Questionnaire
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action
1)  Amanda normally says “Please 
hold while I try that extension” as 
she transfers a call. This feature can 
be turned off. 
Do you want Amanda to say “Please 
hold….?”YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Incoming Calls.
Amanda parameter is 
please_holdSet the Amanda Says “Please Hold 
While…” check box to T for True, 
which is the default.
NOSet the Amanda Says “Please Hold 
While…” check box to F for False
You can also bypass this message for 
individual mailboxes using the Token 
Programming Language (although 
only blind transfers are supported).
2)  Do you want Amanda to verify 
that a caller is still on the telephone 
before transferring the call to an op-
erator?
(Amanda asks the caller to “Say yes 
at the tone” before transferring the 
call.)YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Incoming Calls.
Amanda parameter is 
dtmf_gateSet the Amanda Says “Please Say 
‘Yes’…” check box to T for True, 
which is the default. 
NOSet the Amanda Says “Please Say 
‘Yes’…” check box to F for False.
3)  Do you want callers to be able to 
hold for busy extensions?YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Incoming Calls.
Amanda parameter is 
cancel_busy_holdSet the Caller Can Hold check box to 
T for True, which is the default.
NOSet the Caller Can Hold check box to 
F for False.
4)  If YES to 3, do you want active 
or inactive hold?
On active hold, the caller is prompt-
ed to press * to remain on hold.
On inactive hold, the caller takes no 
action to stay on hold.
(800 numbers benefit from using ac-
tive hold, because the caller cannot 
leave the telephone unattended.)ACTIVEIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Incoming Calls.
Amanda parameter is 
active_holdSet the Active Hold check box to T for 
True, which is the default.
INACTIVESet the Active Hold check box to F for 
False. 
						

							Chapter 10: Configuring Amanda 103
5)  Do you want direct messages to 
play the Name/Extension recording 
instead of the mailbox’s greeting?
(A direct message is left in a user’s 
mail box without attempting to ring 
that user. By default, Amanda plays 
the mailbox’s greeting. The Name/
Ext recording is shorter than the 
mailbox’s greeting.)YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Incoming Calls.
Amanda parameter is 
short_direct_
sendSelect the Play User’s Name and Ex-
tension Recording option.
NOSelect the Play User’s Greeting option 
(which is the default).
6)  Do you want Amanda to answer 
all incoming calls or only answer 
when the operator cannot get to the 
phone within a certain number of 
rings?
(This decision can vary from port to 
port.)ALL CALLSIn the Setup utility, select
System Configuration 
Options→
Advanced 
Configuration→
Per Port.
Amanda parameter is  
n_ringsSet N_RINGS to 1 for each port.
This is a per port setting. The default is 
one ring on each port.
(Amanda is being set up as a primary 
attendant.)
AFTER x 
RINGS
What is x?Set N_RINGS to x for each port, 
where x in the number of rings. This is 
a per port setting.
(Amanda is being set up as a second-
ary attendant.)
7a)  Do you want users and callers  
to be able to listen to, rerecord, or 
cancel messages and greetings that 
they create?YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Messages.
Amanda parameter is 
end_rec_menu
 
record_menuSet the Allow Listening To… check 
box to T for True, which is the default.
NOSet the Allow Listening To… check 
box to F for False.
7b)  Do you want users and callers  
to hear a prompt before they start re-
cording or just the beep?
The prompt is “Begin recording at 
the tone. Finish by pressing # or 
hanging up.”PROMPT and 
BEEPIn the Setup utility, select
System Configuration 
Options→
Advanced 
Configuration→
General.
Amanda parameters are 
begin_rec_prompt 
record_menu Set begin_rec_prompt
 to T for 
True, which is the default. Set 
record_menu
 to T for True, which 
is the default.
BEEP ONLYSet begin_rec_prompt
 to F for 
False. Set record_menu
 to T for 
True, which is the default..
Voice Server Questionnaire (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							104 Installing [email protected]/DOS
8)  When a user listens to messages, 
should Amanda start with his first 
new (unheard) message or the first 
message in his message list (wheth-
er heard or unheard)?NEXT NEW 
MESSAGEIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Messages.
Amanda parameter is 
play_new_firstSet the Play Next New Message check 
box to T for True.
FIRST MES-
SAGE IN 
LISTSet the Play Next New Message check 
box to F for False, which is the default.
9)  What time stamp should a for-
warded message have? You can use 
the time the message was recorded 
or the time the message was for-
warded.
(When you use the time that the 
message was recorded, the person 
receiving the forwarded 
message may think delivery was 
slow and be confused—unless the 
person forwarding the message adds 
a comment.)TIME RE-
CORDEDIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Messages.
Amanda parameter is 
timestamp_
forwardsSelect the Time Originally Recorded 
option, which is the default.
TIME FOR-
WARDEDSelect the Time Forwarded option. 
10)  Do you want Amanda to tell the 
user the date and time a message 
was recorded before playing the 
message?
This option can be modified for each 
user.YESFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Options group box, select the 
Play Date & Time check box.
NOFrom the Options group box, clear the 
Play Date & Time check box.
N
OTE:
A user can always get the 
message date/time by press-
ing 74 during the message 
even if this option is set to 
NO.
11)  If YES to 10, do you want 
Amanda to say ‘today’ and ‘yester-
day’ instead of the exact date? This 
option is set for all users.YESIn the Setup utility, select
System Configuration 
Options→
General 
Configuration→
Messages.
Amanda parameter is 
abbreviate_datesSelect the Amanda Says “Today” And 
“Yesterday” For Dates option, (which 
is the default).
NOSelect the Amanda Always Says Full 
Date option.
Voice Server Questionnaire (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							Chapter 10: Configuring Amanda 105
12)  How many times should the 
telephone ring before Amanda de-
cides the user is unavailable?
(After these rings, Amanda takes a 
message, reroutes the call, or does 
whatever she is configured to do for 
Ring No Answer.)1       2       3  
4       5       6  
7       8      9From the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 
997 in the mailbox List di-
alog box that appears.In the Options group box, the current 
default for Adjust Maximum Rings is 
0, which means 4 rings.
If the circled number is not 4, select 
the Adjust Maximum Rings check box 
and enter the circled number into the 
text box.
C
AUTION:
  If you are using the U to-
ken in Extension fields (to perform a 
partially supervised transfer), Maxi-
mum Rings must be set to 1.
13)  Do you want users to be able to 
turn Do Not Disturb on and off?YESFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Options group box, clear the 
Do Not Disturb Lock check box.
NOFrom the Options group box, select the 
Do Not Disturb Lock check box.
14)  Do you want Do Not Disturb 
initially ON or initially OFF?ONFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears. From the Options group box, select the 
Do Not Disturb check box.
OFFFrom the Options group box, clear the 
Do Not Disturb check box.
15)  Do you want users to be able to 
turn call screening on and off?
(Call screening allows users to ac-
cept or reject calls based on who is 
calling.)YESFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Options group box, clear the 
Call Screening Lock check box.
NOFrom the Options group box, select the 
Call Screening Lock check box.
Voice Server Questionnaire (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							106 Installing [email protected]/DOS
16)  Do you want call screening ini-
tially ON or initially OFF?ONFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 
997 in the mailbox List di-
alog box that appears.From the Options group box, select the 
Call Screening check box.
OFFFrom the Options group box, clear the 
Call Screening check box.
17)  Do you want callers to be able 
to leave messages for the users they 
call?  YESFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Messages group box, select 
the Store check box and enter number 
of seconds for each message into the 
Maximum Length text box.
NOFrom the Messages group box, clear 
the Store check box.
 If the Copy Messages To text box has 
a mailbox different from none, do the 
following:
1 Select the Copy Messages To 
check box.
2 Type none in the Copy Messages 
To text box.
3 Clear the Copy Messages To 
checkbox.
18)  Do you want everyone to use 
the same greeting (and in the same 
voice) when the telephone is not an-
swered?
(NO allows each user to create his 
own greeting.)YESFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Personal Greetings group 
box, select the RNA Lock check box. 
NOFrom the Personal Greetings group 
box, clear the RNA Lock check box.
Each user should record a greeting and 
a Name/Extension recording. Until a 
user records these, the system greeting 
and Name/Extension recording are 
used. When the user records Greeting 
1, the Current Greeting setting chang-
es from 0 to 1 automatically. The user 
may also control what greeting is used. 
([email protected]/DOS pro-
vides 7 greetings per mailbox.)
Voice Server Questionnaire (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							Chapter 10: Configuring Amanda 107
19)  If YES to 18, do you want to use 
Amanda’s system greeting or a 
company-wide custom greeting 
when a telephone is not answered?
(The system greeting is Please 
leave a message for followed by 
the system or custom Name/Exten-
sion recording.)SYSTEMFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Personal Greetings group 
box, click the   button after the 
RNA box. 
The Greeting List dialog box appears. 
Select System and click OK.
From the Greeting List dialog box that 
appears, select System.
CUSTOMFrom the Personal Greetings group 
box, click the   button after the 
RNA box. When the Greeting List di-
alog box appears, select 1. 
In the corresponding Max. Length text 
box, enter the number of seconds for 
the custom recording. 
To create a company-wide custom 
greeting, record a greeting for some 
mailbox (e.g., 445), then use DOS on 
the Amanda server after shutdown to 
copy it (e.g., C:\VMB.DB\5\%
\GRT1.VOX
) as GRT1.VOX for each 
mailbox assigned to a user. For 3-digit 
extensions that start with 2, use:
COPY 
custom_grt 
C:\VMB.DB\?\2??\GRT1.VOX
For 4-digit extensions that start with 4, 
use:
COPY 
custom_grt 
C:\VMB.DB\?\4???\GRT1.VOX
(Here, custom_grt is 
C:\VMB.DB\5\%\GRT1.VOX
.)
Update the mailbox template (997) be-
fore you create the other mailboxes. 
Use the COPY command shown 
above after the IDs have been created.
Voice Server Questionnaire (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action 
						

							108 Installing [email protected]/DOS
20)  If callers are permitted to hold 
when a user extension is BUSY (see 
question 3), do you want everyone 
to use the same greeting (and in the 
same voice)?(NO allows each user 
to create his own busy greeting.)YESFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Personal Greetings group 
box, select the Custom Busy Lock 
check box.
NOFrom the Personal Greetings group 
box, clear the Custom Busy Lock 
check box. Set the Custom Busy Max. 
Length to a number greater than zero, 
such as 45.
Each user should record a busy greet-
ing. Until a user records his busy 
greeting, the system busy greeting is 
used. The user may also control what 
busy greeting is used.
21)  If YES to 20, do you want to use 
Amanda’s system busy greeting or a 
custom busy greeting?
(The system busy greeting explains 
to the caller how to hold for the ex-
tension. If the caller presses *, 
Amanda plays music, then retries 
the extension. If it is still busy, 
Amanda changes the prompt: the 
caller can hold, enter another exten-
sion, or leave a message.)SYSTEMFrom the Mailbox win-
dow in Amanda Adminis-
trator, click the   
button after the mailbox 
box. Enter 997 in the 
mailbox List dialog box 
that appears.From the Personal Greetings group 
box, clear the Custom Busy check box.
CUSTOMFrom the Personal Greetings group 
box, select the Custom Busy check 
box. Record the busy message for a 
mailbox (e.g., 445), then use DOS on 
the Amanda server after shutdown to 
copy that message (e.g., 
C:\VMB.DB\5\%
\BUSY.VOX
) as BUSY.VOX for 
each user’s mailbox. For 3-digit exten-
sions that start with 2, use: 
COPY 
custom_bsy 
C:\VMB.DB\?\2??\BUSY.VOX
For 4-digit extensions that start with 4, 
use:
COPY 
custom_bsy 
C:\VMB.DB\?\4???\BUSY.VOX
(Here, custom_bsy is 
C:\VMB.DB\5\%\BUSY.VOX
.)
Update the mailbox template (997) be-
fore you create the other mailboxes. 
Use the COPY command shown 
above after the IDs have been created.
Voice Server Questionnaire (Continued)
QuestionCircle
ResponseLocation and Amanda 
Parameter (if applica-
ble)Action